ESR25JZPJ682 Equivalent & Substitute Parts

Part Overview

The ESR25JZPJ682 is a 6.8 kOhms ±5% thick film chip resistor manufactured by Rohm Semiconductor in the 1210 (3225 Metric) package. Rated for 0.667W (2/3W) power dissipation with automotive AEC-Q200 qualification and pulse withstanding capability, this component operates across -55°C to 155°C. The part is currently active in production. Substitute parts may be required due to inventory constraints, supply chain optimization, or design revision requirements while maintaining electrical and mechanical compatibility.

Substiute Parts

ESR25JZPJ682

Rohm SemiconductorIn Stock: 3830ESR25JZPJ682 Datasheet

Current PartRFQ

ERJ-P14J682U

Panasonic Electronic ComponentsIn Stock: 11290ERJ-P14J682U Datasheet

DirectRFQ

CRCW12106K80JNEA

Vishay DaleIn Stock: 10211CRCW12106K80JNEA Datasheet

UpgradeRFQ

CRCW12106K80JNEAHP

Vishay DaleIn Stock: 1218CRCW12106K80JNEAHP Datasheet

UpgradeRFQ

ERJ-14YJ682U

Panasonic Electronic ComponentsIn Stock: 15959ERJ-14YJ682U Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by the following critical parameters:

• Resistance Value: Must be 6.8 kOhms ±5%
• Package / Case: Must be 1210 (3225 Metric) for mechanical and thermal compatibility
• Composition: Thick film construction
• Operating Temperature Range: Must support -55°C ~ 155°C
• Temperature Coefficient: ±200ppm/°C
• Automotive Compliance: AEC-Q200 rating required
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: MSL 1 (Unlimited)

The substitute parts listed below meet all critical parameters. Power rating variations (0.5W, 0.75W) represent upgrades or downgrades from the original 0.667W specification and are acceptable substitutes provided the application circuit design permits the power dissipation change.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitutes (Active Status)

ERJ-P14J682U, CRCW12106K80JNEA, and CRCW12106K80JNEAHP are all active products suitable for new designs. These parts maintain full AEC-Q200 automotive compliance and ROHS3 certification. The power rating differences (0.5W or 0.75W versus the original 0.667W) do not affect substitution eligibility provided circuit thermal analysis confirms acceptable power dissipation margins.

Secondary Substitute (Legacy Status)

ERJ-14YJ682U carries a "Not For New Designs" product status. While electrically and mechanically compatible, this part should be used only for legacy system maintenance or design revisions where supply continuity is critical. New designs should prioritize active-status alternatives.

Compliance Considerations

All substitute parts maintain identical automotive AEC-Q200 qualification, RoHS3 compliance, and MSL 1 rating. No additional qualification or testing is required for substitution within the same application context.

Frequently Asked Questions (FAQ)

Q: Can ERJ-P14J682U replace ESR25JZPJ682 in automotive applications?

A: Yes. Both parts are AEC-Q200 qualified with identical resistance, tolerance, operating temperature range, and temperature coefficient. The power rating difference (0.5W versus 0.667W) is acceptable provided circuit design analysis confirms the lower power rating does not exceed thermal limits.

Q: What is the difference between CRCW12106K80JNEA and CRCW12106K80JNEAHP?

A: Both are Vishay Dale 1210 package resistors with 6.8 kOhms ±5% resistance. CRCW12106K80JNEAHP is rated for 0.75W (3/4W) power dissipation with pulse withstanding capability, while CRCW12106K80JNEA is rated for 0.5W (1/2W). Select based on circuit power dissipation requirements.

Q: Why is ERJ-14YJ682U marked "Not For New Designs"?

A: This designation indicates the part is in legacy status. Panasonic continues to supply existing inventory, but the part is not recommended for new product development. Use active-status alternatives (ERJ-P14J682U or Vishay Dale CRCW series) for new designs.

Q: Are all substitute parts available in Tape & Reel packaging?

A: Yes. All listed substitute parts are supplied in Tape & Reel (TR) packaging, maintaining compatibility with automated assembly processes.

Q: Do substitute parts require different PCB footprints?

A: No. All substitute parts use the 1210 (3225 Metric) package with identical mechanical dimensions (0.126" L x 0.098" W / 3.20mm x 2.50mm). PCB footprints are interchangeable.

Q: What is the MSL rating significance for these parts?

A: All parts carry MSL 1 (Unlimited) rating, indicating unlimited shelf life without moisture bake-out requirements. Storage and handling procedures are identical across all substitute options.