ESR25JZPJ620 Equivalent & Substitute Parts

Part Overview

The ESR25JZPJ620 is a 62 Ohm ±5% thick film chip resistor manufactured by Rohm Semiconductor in the 1210 (3225 Metric) package. Rated for 0.667W (2/3W) power dissipation with automotive AEC-Q200 qualification and pulse withstanding capability, this component operates across -55°C to 155°C. The part is actively produced and widely used in automotive and industrial applications requiring reliable resistive elements with stringent environmental specifications.

Substitute parts become necessary due to inventory constraints, supply chain disruptions, or design optimization requirements while maintaining electrical and mechanical compatibility within the specified parameter tolerances.

Substiute Parts

ESR25JZPJ620

Rohm SemiconductorIn Stock: 952ESR25JZPJ620 Datasheet

Current PartRFQ

ERJ-P14J620U

Panasonic Electronic ComponentsIn Stock: 1440ERJ-P14J620U Datasheet

DirectRFQ

CRCW121062R0JNEA

Vishay DaleIn Stock: 8993CRCW121062R0JNEA Datasheet

UpgradeRFQ

ERJ-14YJ620U

Panasonic Electronic ComponentsIn Stock: 64970ERJ-14YJ620U Datasheet

UpgradeRFQ

RMCF1210JT62R0

Stackpole Electronics IncIn Stock: 4284RMCF1210JT62R0 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ESR25JZPJ620 is determined by strict adherence to the following parameters:

Critical Parameters (Must Match Exactly):

• Resistance value: 62 Ohms
• Tolerance: ±5%
• Package / Case: 1210 (3225 Metric)
• Composition: Thick Film
• Operating Temperature Range: -55°C ~ 155°C
• Temperature Coefficient: ±200ppm/°C
• Automotive Rating: AEC-Q200
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

Allowable Variation:

• Power rating: The main part is rated 0.667W (2/3W). Substitute parts rated 0.5W (1/2W) are electrically compatible as they meet the same resistance and tolerance specifications within the identical package footprint and thermal operating range.
• Height - Seated (Max): Variations between 0.024" to 0.028" (0.60mm to 0.70mm) are acceptable within standard PCB assembly tolerances for the 1210 package.
• Product Status: Active and Not For New Designs parts are both acceptable for substitution purposes.

All identified substitute parts maintain identical electrical characteristics, mechanical compatibility, and automotive compliance certifications.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed maintain full electrical and mechanical compatibility with the ESR25JZPJ620 within the specified parameter tolerances. Selection should be based on the following criteria:

For New Designs: Prioritize parts with Active product status: CRCW121062R0JNEA (Vishay Dale), ERJ-P14J620U (Panasonic), or RMCF1210JT62R0 (Stackpole Electronics Inc). These parts ensure long-term availability and manufacturer support.

For Existing Designs: Any of the listed substitutes are electrically and mechanically compatible. The ERJ-14YJ620U, despite Not For New Designs status, remains functionally equivalent and is suitable for replacement in established applications.

Compliance Verification: All substitute parts maintain ROHS3 compliance, AEC-Q200 automotive qualification, and identical moisture sensitivity ratings. No additional compliance validation is required for direct substitution.

Power Dissipation Consideration: The ESR25JZPJ620 is rated 0.667W while all substitutes are rated 0.5W. In applications where the original part operates below 0.5W, substitution is direct. For applications requiring the full 0.667W rating, thermal analysis of the specific circuit is necessary to confirm the lower-rated substitute is adequate.

Frequently Asked Questions (FAQ)

Q: Can I substitute a 0.5W rated part for the 0.667W ESR25JZPJ620?

A: Yes, provided your circuit design does not require continuous operation at power levels exceeding 0.5W. The electrical characteristics (resistance, tolerance, temperature coefficient) are identical. Verify actual power dissipation in your application before substitution.

Q: Are all substitute parts in the same 1210 package?

A: Yes. All listed substitutes use the 1210 (3225 Metric) package with identical footprints. Height variations (0.024" to 0.028") fall within standard PCB assembly tolerances and do not affect placement or soldering.

Q: What is the difference between Active and Not For New Designs status?

A: Active parts are currently manufactured and recommended for new designs. Not For New Designs parts (ERJ-14YJ620U) are still produced but not recommended for new applications. Both are functionally equivalent and suitable for replacement in existing designs.

Q: Do all substitutes maintain AEC-Q200 automotive qualification?

A: Yes. All listed substitute parts carry AEC-Q200 certification, ensuring compliance with automotive reliability and environmental testing standards identical to the original ESR25JZPJ620.

Q: Are there any thermal performance differences between substitutes?

A: All parts share identical temperature coefficient (±200ppm/°C) and operating range (-55°C ~ 155°C). Height variations are minimal and do not significantly impact thermal dissipation in standard PCB layouts.

Q: Can I use these substitutes in high-reliability applications?

A: Yes. All substitute parts maintain ROHS3 compliance, AEC-Q200 qualification, and Moisture Sensitivity Level 1 (Unlimited), meeting high-reliability requirements equivalent to the original part.