ESR25JZPJ5R6 Equivalent & Substitute Parts

Part Overview

The ESR25JZPJ5R6 is a 5.6 Ohm thick film chip resistor manufactured by Rohm Semiconductor in the 1210 (3225 Metric) package. This component is rated for 0.667W (2/3W) power dissipation with ±5% tolerance and is qualified to the automotive AEC-Q200 standard with pulse withstanding capability. The part is actively produced and widely available in inventory. Substitute parts may be required due to supply constraints, lead time considerations, or specific application requirements within the allowed electrical and mechanical parameter ranges.

Substiute Parts

ESR25JZPJ5R6

Rohm SemiconductorIn Stock: 761ESR25JZPJ5R6 Datasheet

Current PartRFQ

CRCW12105R60JNEA

Vishay DaleIn Stock: 7271CRCW12105R60JNEA Datasheet

UpgradeRFQ

RC1210JR-075R6L

YAGEOIn Stock: 5310RC1210JR-075R6L Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ESR25JZPJ5R6 must maintain the following critical parameters:

• Resistance value: 5.6 Ohms
• Tolerance: ±5%
• Package: 1210 (3225 Metric)
• Composition: Thick Film
• Temperature Coefficient: ±200ppm/°C
• Operating Temperature Range: -55°C ~ 155°C
• Terminations: 2
• RoHS3 Compliance
• MSL Rating: 1 (Unlimited)

The substitute parts identified are grouped as follows:

Upgrade Substitute: CRCW12105R60JNEA (Vishay Dale) — Maintains all critical electrical parameters with AEC-Q200 automotive qualification. Power rating is 0.5W (1/2W), which is lower than the main part but remains within acceptable substitution criteria for applications not requiring the full 0.667W capacity.

Similar Substitute: RC1210JR-075R6L (YAGEO) — Maintains all critical electrical parameters with moisture-resistant thick film composition. Power rating is 0.5W (1/2W), consistent with the upgrade substitute. Does not carry explicit AEC-Q200 rating but meets all other specified parameters.

Parameter Comparison

Engineering Selection Recommendations

CRCW12105R60JNEA (Vishay Dale) is the primary substitute option. It maintains AEC-Q200 automotive qualification matching the original part and is actively produced with high inventory availability (7228 pcs). The reduced power rating of 0.5W versus 0.667W is acceptable for applications where thermal dissipation does not exceed 0.5W continuous operation.

RC1210JR-075R6L (YAGEO) is a secondary substitute option. It meets all electrical and mechanical parameters with moisture-resistant composition and maintains unlimited MSL rating. This part does not carry explicit AEC-Q200 certification; selection should be based on whether automotive qualification is mandatory for the application.

Both substitute parts are ROHS3 compliant and maintain the full operating temperature range of -55°C to 155°C required by the original specification.

Frequently Asked Questions (FAQ)

Q: Can CRCW12105R60JNEA replace ESR25JZPJ5R6 in all applications?

A: CRCW12105R60JNEA is electrically and mechanically compatible with ESR25JZPJ5R6 for applications where continuous power dissipation does not exceed 0.5W. The substitute maintains identical resistance, tolerance, temperature coefficient, and operating temperature range. Both parts carry AEC-Q200 automotive qualification.

Q: What is the difference in power rating between the main part and substitutes?

A: ESR25JZPJ5R6 is rated for 0.667W (2/3W), while both CRCW12105R60JNEA and RC1210JR-075R6L are rated for 0.5W (1/2W). Selection depends on the actual power dissipation requirements of the circuit. If the application requires continuous dissipation above 0.5W, the substitute parts are not suitable.

Q: Are the substitute parts physically identical to the main part?

A: All three parts use the 1210 (3225 Metric) package with identical footprints. Physical dimensions are nearly identical: ESR25JZPJ5R6 measures 3.20mm x 2.50mm with 0.65mm maximum height; CRCW12105R60JNEA and RC1210JR-075R6L measure 3.20mm x 2.50mm and 3.10mm x 2.60mm respectively, with 0.60mm maximum height. All are suitable for the same PCB layout.

Q: Does RC1210JR-075R6L require AEC-Q200 certification?

A: RC1210JR-075R6L does not carry explicit AEC-Q200 automotive qualification. If the application mandates automotive-grade components, CRCW12105R60JNEA is the appropriate substitute. If automotive qualification is not required, RC1210JR-075R6L is a valid alternative.

Q: What is the moisture sensitivity level for all parts?

A: All three parts carry MSL Rating 1 (Unlimited), indicating no moisture sensitivity restrictions during storage or handling. Standard PCB assembly processes are suitable for all parts without special precautions.