ESR25JZPJ510 Equivalent & Substitute Parts

Part Overview

The ESR25JZPJ510 is a 51 Ohm ±5% thick film chip resistor manufactured by Rohm Semiconductor in 1210 (3225 Metric) package format with 0.667W power rating. This component is rated for automotive applications under AEC-Q200 standard with pulse withstanding capability. The part is currently in active production status. Substitute parts are identified when equivalent resistance, tolerance, package, and automotive certification requirements must be maintained across different manufacturers or when alternative power ratings are acceptable within application constraints.

Key Parameters

Parameter	Value
Resistance	51 Ohms
Tolerance	±5%
Power Rating	0.667W (2/3W)
Package / Case	1210 (3225 Metric)
Composition	Thick Film
Automotive Rating	AEC-Q200
Temperature Coefficient	±200ppm/°C
Operating Temperature Range	-55°C ~ 155°C
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitute parts for the ESR25JZPJ510 are qualified based on the following criteria:

Critical Parameters (Must Match):

Resistance value: 51 Ohms
Tolerance: ±5%
Package: 1210 (3225 Metric)
Composition: Thick Film
Automotive certification: AEC-Q200
Temperature coefficient: ±200ppm/°C
Operating temperature range: -55°C ~ 155°C
RoHS compliance: ROHS3 Compliant

Allowable Variation:

Power rating: Substitutes with equal or higher power ratings (0.5W, 0.75W) are acceptable as they provide equivalent or superior thermal performance in the same package footprint
Manufacturer: Different manufacturers (Panasonic, Vishay Dale, Stackpole Electronics) produce equivalent parts meeting identical electrical and mechanical specifications

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Operating Temp	AEC-Q200	RoHS3	Product Status
ESR25JZPJ510	Rohm Semiconductor	51 Ω	±5%	0.667	1210	±200ppm/°C	-55~155°C	Yes	Yes	Active
ERJ-P14J510U	Panasonic Electronic Components	51 Ω	±5%	0.5	1210	±200ppm/°C	-55~155°C	Yes	Yes	Active
CRCW121051R0JNEA	Vishay Dale	51 Ω	±5%	0.5	1210	±200ppm/°C	-55~155°C	Yes	Yes	Active
CRCW121051R0JNEAHP	Vishay Dale	51 Ω	±5%	0.75	1210	±200ppm/°C	-55~155°C	Yes	Yes	Active
ERJ-14YJ510U	Panasonic Electronic Components	51 Ω	±5%	0.5	1210	±200ppm/°C	-55~155°C	Yes	Yes	Not For New Designs
RMCF1210JT51R0	Stackpole Electronics Inc	51 Ω	±5%	0.5	1210	±200ppm/°C	-55~155°C	Yes	Yes	Active

Engineering Selection Recommendations

Primary Substitutes (Active Status): ERJ-P14J510U, CRCW121051R0JNEA, CRCW121051R0JNEAHP, and RMCF1210JT51R0 are all suitable direct substitutes. All maintain AEC-Q200 automotive certification and ROHS3 compliance. Selection among these parts should be based on availability, lead time, and cost considerations. The higher power rating variants (CRCW121051R0JNEAHP at 0.75W) provide additional thermal margin in applications where the original 0.667W specification allows substitution with higher-rated components.

Legacy Consideration: ERJ-14YJ510U carries "Not For New Designs" status and should be avoided for new product development. This part remains functionally equivalent but is designated for legacy support only.

Power Rating Substitution: Parts rated at 0.5W (ERJ-P14J510U, CRCW121051R0JNEA, ERJ-14YJ510U, RMCF1210JT51R0) are acceptable substitutes for the 0.667W original part when application thermal analysis confirms adequate power dissipation margin. The 0.75W variant (CRCW121051R0JNEAHP) provides enhanced thermal performance without design modification.

Frequently Asked Questions (FAQ)

Q: Can I substitute a 0.5W rated resistor for the original 0.667W part? A: Yes, provided your circuit analysis confirms that actual power dissipation remains below the 0.5W limit with appropriate safety margin. The 1210 package dimensions are identical across all substitutes, ensuring mechanical compatibility.

Q: Are all substitute parts automotive qualified? A: All listed substitutes carry AEC-Q200 certification, meeting automotive reliability and qualification standards equivalent to the original ESR25JZPJ510.

Q: What is the significance of "Not For New Designs" status on ERJ-14YJ510U? A: This designation indicates the part is in mature/legacy phase. While functionally equivalent and available in inventory, it should not be selected for new product designs. Active alternatives should be prioritized.

Q: Do all substitutes maintain the same physical dimensions? A: All substitutes use the 1210 (3225 Metric) package with identical length (3.20mm) and width (2.50mm). Height variations range from 0.60mm to 0.70mm maximum seated height, which is within standard PCB assembly tolerances and does not affect interchangeability.

Q: Are there any compliance differences between manufacturers? A: All listed substitutes maintain identical RoHS3 compliance, REACH unaffected status, and AEC-Q200 automotive certification. No compliance trade-offs exist between manufacturers.

Q: Which substitute offers the best thermal performance? A: CRCW121051R0JNEAHP provides the highest power rating at 0.75W, offering superior thermal headroom compared to the original 0.667W specification and 0.5W alternatives.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message