ESR25JZPJ474 Equivalent & Substitute Parts

Part Overview

The ESR25JZPJ474 is a 470 kOhms ±5% thick film chip resistor manufactured by Rohm Semiconductor in the 1210 (3225 Metric) package. Rated for 0.667W (2/3W) power dissipation with automotive AEC-Q200 qualification and pulse withstanding capability, this component operates across -55°C to 155°C. The part is currently active in production with 791 units in stock. Equivalent and substitute parts are identified based on matching resistance value, tolerance, package dimensions, and automotive qualification requirements.

Key Parameters

Parameter	Value
Resistance	470 kOhms
Tolerance	±5%
Power Rating	0.667W (2/3W)
Package / Case	1210 (3225 Metric)
Composition	Thick Film
Temperature Coefficient	±200ppm/°C
Operating Temperature Range	-55°C ~ 155°C
Automotive Rating	AEC-Q200
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitute parts for the ESR25JZPJ474 are qualified based on the following criteria:

Resistance Value: All substitutes maintain 470 kOhms ±5%
Package Compatibility: All substitutes use 1210 (3225 Metric) package with identical footprint dimensions (0.126" L x 0.098" W / 3.20mm x 2.50mm)
Automotive Qualification: All substitutes carry AEC-Q200 rating
Composition: All substitutes are thick film construction
Temperature Coefficient: All substitutes maintain ±200ppm/°C
Operating Temperature: All substitutes support -55°C ~ 155°C range
Compliance: All substitutes are ROHS3 compliant with MSL 1 rating

Substitutes are grouped by power rating capability. The ESR25JZPJ474 operates at 0.667W (2/3W). Lower-rated substitutes (0.5W / 1/2W) are suitable for applications where power dissipation does not exceed 0.5W. Higher-rated substitutes (0.75W / 3/4W) provide additional thermal margin for demanding applications.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (Watts)	Package	Temp Coeff	Operating Temp	AEC-Q200	Height (Max)	Product Status
ESR25JZPJ474	Rohm Semiconductor	470 kOhms	±5%	0.667W	1210	±200ppm/°C	-55°C ~ 155°C	Yes	0.026" (0.65mm)	Active
ERJ-P14J474U	Panasonic Electronic Components	470 kOhms	±5%	0.5W	1210	±200ppm/°C	-55°C ~ 155°C	Yes	0.028" (0.70mm)	Active
CRCW1210470KJNEA	Vishay Dale	470 kOhms	±5%	0.5W	1210	±200ppm/°C	-55°C ~ 155°C	Yes	0.024" (0.60mm)	Active
CRCW1210470KJNEAHP	Vishay Dale	470 kOhms	±5%	0.75W	1210	±200ppm/°C	-55°C ~ 155°C	Yes	0.028" (0.70mm)	Active
ERJ-14YJ474U	Panasonic Electronic Components	470 kOhms	±5%	0.5W	1210	±200ppm/°C	-55°C ~ 155°C	Yes	0.028" (0.70mm)	Not For New Designs

Engineering Selection Recommendations

Primary Substitutes (Active Status)

ERJ-P14J474U (Panasonic) and CRCW1210470KJNEA (Vishay Dale) are direct functional equivalents for applications where power dissipation remains below 0.5W. Both maintain full AEC-Q200 compliance and identical electrical specifications. CRCW1210470KJNEA offers the lowest seated height at 0.024" (0.60mm), beneficial for space-constrained PCB layouts.

CRCW1210470KJNEAHP (Vishay Dale) provides upgraded power handling at 0.75W (3/4W) with pulse withstanding capability, suitable for applications requiring thermal margin above the original 0.667W rating while maintaining identical package footprint.

Legacy Substitute (Not For New Designs)

ERJ-14YJ474U (Panasonic) carries "Not For New Designs" status and should be avoided for new product development. This part remains available for legacy system support and field replacements only.

Frequently Asked Questions (FAQ)

Q: Can I use a 0.5W rated substitute in place of the 0.667W ESR25JZPJ474?

A: Yes, provided the actual circuit power dissipation does not exceed 0.5W. The 0.5W rating represents the maximum safe dissipation limit. If your application requires the full 0.667W capability, use the 0.75W CRCW1210470KJNEAHP instead.

Q: Are all substitutes mechanically compatible with the original ESR25JZPJ474?

A: Yes. All substitutes use the 1210 (3225 Metric) package with identical footprint dimensions (3.20mm x 2.50mm). Seated heights vary slightly (0.024" to 0.028"), which is within standard PCB assembly tolerances and does not affect mechanical compatibility.

Q: Do substitute parts maintain the same automotive qualification?

A: Yes. All active substitute parts carry AEC-Q200 rating identical to the ESR25JZPJ474. The ERJ-14YJ474U also carries AEC-Q200 but is marked "Not For New Designs."

Q: What is the difference between ERJ-P14J474U and ERJ-14YJ474U?

A: Both are Panasonic 470 kOhms 1210 resistors with identical electrical specifications. ERJ-P14J474U is the current active part. ERJ-14YJ474U is the legacy series marked "Not For New Designs" and should not be used in new product development.

Q: Which substitute offers the best thermal performance?

A: CRCW1210470KJNEAHP provides the highest power rating at 0.75W (3/4W) with pulse withstanding capability, offering superior thermal margin. For standard applications, CRCW1210470KJNEA offers the lowest seated height at 0.024" (0.60mm), optimizing PCB density.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message