ESR25JZPJ361 Equivalent & Substitute Parts

Part Overview

The ESR25JZPJ361 is a 360 Ohm ±5% thick film chip resistor manufactured by Rohm Semiconductor in the 1210 (3225 Metric) package. This component is rated for 0.667W (2/3W) power dissipation and meets AEC-Q200 automotive qualification standards with pulse withstanding capability. The part is currently in active production status.

Substitute parts become necessary when the primary part experiences supply constraints, extended lead times, or when design requirements allow for compatible alternatives that meet the same electrical and mechanical specifications. The parts listed below provide equivalent electrical performance within the defined parameter tolerances.

Substiute Parts

ESR25JZPJ361

Rohm SemiconductorIn Stock: 876ESR25JZPJ361 Datasheet

Current PartRFQ

ERJ-P14J361U

Panasonic Electronic ComponentsIn Stock: 1599ERJ-P14J361U Datasheet

DirectRFQ

CRCW1210360RJNEA

Vishay DaleIn Stock: 1005CRCW1210360RJNEA Datasheet

UpgradeRFQ

ERJ-14YJ361U

Panasonic Electronic ComponentsIn Stock: 24796ERJ-14YJ361U Datasheet

UpgradeRFQ

RMCF1210JT360R

Stackpole Electronics IncIn Stock: 6680RMCF1210JT360R Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ESR25JZPJ361 is determined by the following critical parameters:

Mandatory Matching Parameters:

• Resistance value: 360 Ohms
• Tolerance: ±5%
• Package / Case: 1210 (3225 Metric)
• Composition: Thick Film
• Temperature Coefficient: ±200ppm/°C
• Operating Temperature Range: -55°C ~ 155°C
• Automotive Rating: AEC-Q200
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

Allowable Variation:

• Power Rating: Substitute parts rated at 0.5W (1/2W) are acceptable as they meet or exceed the thermal requirements of circuits designed for the 0.667W (2/3W) main part
• Packaging Format: Both Tape & Reel (TR) and Cut Tape (CT) formats are interchangeable in manufacturing processes
• Height - Seated (Max): Variations within 0.024" to 0.028" (0.60mm to 0.70mm) are acceptable for PCB assembly compatibility

All substitute parts listed maintain identical electrical performance and automotive compliance specifications.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitutes (Active Status):

ERJ-P14J361U, CRCW1210360RJNEA, and RMCF1210JT360R are all suitable direct substitutes for the ESR25JZPJ361. These parts maintain active production status and meet all mandatory electrical and compliance requirements. The power rating reduction from 0.667W to 0.5W is acceptable for applications where the circuit design does not require the higher power dissipation capability of the main part.

Secondary Substitute (Legacy Status):

ERJ-14YJ361U is functionally equivalent but carries a "Not For New Designs" product status from Panasonic. This part remains available in high inventory quantities and is suitable for replacement or repair applications in existing designs. New product designs should prioritize parts with active production status.

Compliance Considerations:

All listed substitutes maintain ROHS3 compliance, AEC-Q200 automotive qualification, and MSL 1 moisture sensitivity rating. No additional qualification or testing is required when substituting between these parts within the same application.

Frequently Asked Questions (FAQ)

Q: Can I substitute a 0.5W (1/2W) rated resistor for the 0.667W (2/3W) ESR25JZPJ361?

A: Yes. The substitute parts with 0.5W ratings are acceptable when the circuit design does not require power dissipation exceeding 0.5W. The 0.5W rating provides sufficient thermal capability for applications originally designed for the 0.667W part. Verify that your circuit's actual power dissipation does not exceed 0.5W before substitution.

Q: Are there differences in physical dimensions between the substitute parts?

A: All parts use the 1210 (3225 Metric) package with identical length (0.126" / 3.20mm) and width (0.098" / 2.50mm). Height variations range from 0.024" to 0.028" (0.60mm to 0.70mm). These height differences are within standard PCB assembly tolerances and do not affect placement or soldering.

Q: Can I use RMCF1210JT360R in Cut Tape format instead of Tape & Reel format?

A: Yes. Cut Tape (CT) and Tape & Reel (TR) packaging formats contain identical components and differ only in delivery format. The choice between formats depends on your manufacturing process and inventory management requirements, not on electrical or mechanical compatibility.

Q: Is ERJ-14YJ361U still suitable for use despite its "Not For New Designs" status?

A: ERJ-14YJ361U is electrically and mechanically equivalent to the ESR25JZPJ361 and remains suitable for replacement in existing designs or repair applications. The "Not For New Designs" designation indicates that Panasonic is not recommending this part for new product development. For new designs, select from the active status alternatives: ERJ-P14J361U, CRCW1210360RJNEA, or RMCF1210JT360R.

Q: Do all substitute parts meet the same automotive qualification standards?

A: Yes. All listed substitute parts carry AEC-Q200 automotive qualification, matching the ESR25JZPJ361. They are suitable for automotive applications requiring this certification level.

Q: What is the significance of the ±200ppm/°C temperature coefficient?

A: The temperature coefficient indicates that the resistance value changes by ±200 parts per million for each degree Celsius change in operating temperature. All listed parts share this identical specification, ensuring consistent thermal performance across the -55°C to 155°C operating range.