ESR25JZPJ360 Equivalent & Substitute Parts

Part Overview

The ESR25JZPJ360 is a 36 Ohm ±5% thick film chip resistor manufactured by Rohm Semiconductor in the 1210 (3225 Metric) package format. This component is rated for 0.667W (2/3W) power dissipation and meets automotive AEC-Q200 qualification standards with pulse withstanding capability. The part is currently in active production status with 683 units available in inventory.

Substitute parts become necessary when the primary part experiences supply constraints, extended lead times, or when design requirements allow for compatible alternatives that meet the same electrical and mechanical specifications.

Substiute Parts

ESR25JZPJ360

Rohm SemiconductorIn Stock: 779ESR25JZPJ360 Datasheet

Current PartRFQ

ERJ-P14J360U

Panasonic Electronic ComponentsIn Stock: 3188ERJ-P14J360U Datasheet

DirectRFQ

CRCW121036R0JNEA

Vishay DaleIn Stock: 13223CRCW121036R0JNEA Datasheet

UpgradeRFQ

ERJ-14YJ360U

Panasonic Electronic ComponentsIn Stock: 19762ERJ-14YJ360U Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ESR25JZPJ360 is determined by the following criteria:

Mandatory Matching Parameters:

• Resistance value: 36 Ohms
• Tolerance: ±5%
• Package / Case: 1210 (3225 Metric)
• Composition: Thick Film
• Temperature Coefficient: ±200ppm/°C
• Operating Temperature Range: -55°C ~ 155°C
• Automotive Rating: AEC-Q200
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

Allowable Variation:

• Power Rating: Substitutes rated at 0.5W (1/2W) are acceptable as they represent a lower power dissipation specification within the same package, provided circuit design does not require the full 0.667W capability.
• Height - Seated (Max): Minor dimensional variations within the 1210 package specification are acceptable.

Three substitute parts meet these criteria and are listed below.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitute: CRCW121036R0JNEA (Vishay Dale)

This part is the preferred substitute for new designs. It maintains active production status, offers the highest inventory availability (13158 units), and features the lowest seated height (0.024"), which provides optimal PCB assembly compatibility. All electrical and thermal specifications match the ESR25JZPJ360 requirements.

Secondary Substitute: ERJ-P14J360U (Panasonic Electronic Components)

This part is suitable for applications where supply of the primary part is constrained. It maintains active production status with substantial inventory (3112 units). The seated height of 0.028" is within acceptable tolerance for standard 1210 package applications.

Legacy Substitute: ERJ-14YJ360U (Panasonic Electronic Components)

This part carries a "Not For New Designs" status and should be used only when existing inventory must be consumed or when retrofitting legacy equipment. Despite its discontinued design status, it remains electrically and mechanically compatible with the ESR25JZPJ360 and maintains full AEC-Q200 compliance.

Frequently Asked Questions (FAQ)

Q: Can I use a 0.5W (1/2W) rated resistor in place of the 0.667W (2/3W) ESR25JZPJ360?

A: Yes, provided your circuit design does not require power dissipation exceeding 0.5W at the 36 Ohm resistance value. The substitute parts (ERJ-P14J360U, CRCW121036R0JNEA, ERJ-14YJ360U) are all rated for 0.5W and are electrically compatible. Verify that your application's maximum current through the resistor does not exceed the 0.5W limit.

Q: Are all substitute parts in the same 1210 package?

A: Yes. All substitute parts use the 1210 (3225 Metric) package format with identical footprint dimensions (0.126" L x 0.098" W / 3.20mm x 2.50mm). Minor height variations (0.024" to 0.028") are within standard 1210 package tolerances and do not affect PCB assembly or electrical performance.

Q: Do all substitute parts meet automotive AEC-Q200 qualification?

A: Yes. The ESR25JZPJ360 and all three substitute parts (ERJ-P14J360U, CRCW121036R0JNEA, ERJ-14YJ360U) carry AEC-Q200 automotive qualification and are suitable for automotive applications requiring this certification.

Q: What is the difference between the substitute parts?

A: All three substitutes share identical electrical specifications (36 Ohms ±5%, ±200ppm/°C, -55°C ~ 155°C). The primary differences are manufacturer, product status, and inventory availability. CRCW121036R0JNEA is recommended for new designs due to active status and highest stock levels. ERJ-P14J360U is an active alternative. ERJ-14YJ360U is discontinued for new designs but remains available.

Q: Are these parts RoHS compliant?

A: Yes. The ESR25JZPJ360 and all substitute parts are ROHS3 compliant with Moisture Sensitivity Level 1 (Unlimited), indicating no moisture sensitivity restrictions during storage or handling.