ESR25JZPJ332 Equivalent & Substitute Parts

Part Overview

The ESR25JZPJ332 is a 3.3 kOhms ±5% thick film chip resistor manufactured by Rohm Semiconductor in the 1210 (3225 Metric) package. Rated for 0.667W (2/3W) power dissipation with automotive AEC-Q200 qualification and pulse withstanding capability, this component operates across -55°C to 155°C. The part is currently active in production with 2221 units in stock. Substitute parts may be required due to supply constraints, design optimization for lower power ratings, or tolerance upgrades to ±1% specifications.

Substiute Parts

ESR25JZPJ332

Rohm SemiconductorIn Stock: 2319ESR25JZPJ332 Datasheet

Current PartRFQ

ERJ-P14J332U

Panasonic Electronic ComponentsIn Stock: 17512ERJ-P14J332U Datasheet

DirectRFQ

CRCW12103K30JNEA

Vishay DaleIn Stock: 15565CRCW12103K30JNEA Datasheet

UpgradeRFQ

ERJ-14YJ332U

Panasonic Electronic ComponentsIn Stock: 29747ERJ-14YJ332U Datasheet

UpgradeRFQ

ERJ-P14F3301U

Panasonic Electronic ComponentsIn Stock: 4986ERJ-P14F3301U Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ESR25JZPJ332 is determined by the following criteria:

Primary Substitution Parameters:

• Resistance value: 3.3 kOhms (exact match required)
• Package: 1210 (3225 Metric) (exact match required)
• Tolerance: ±5% or tighter (±1% acceptable as upgrade)
• Composition: Thick Film
• Automotive Rating: AEC-Q200 compliance required
• Operating Temperature: -55°C to 155°C minimum
• RoHS Status: ROHS3 Compliant

Secondary Consideration:

• Power Rating: Minimum 0.5W (1/2W) acceptable; 0.667W (2/3W) preferred for direct replacement

All substitute parts listed maintain identical resistance, package, temperature range, and automotive qualification. Variations in power rating and tolerance are noted as design trade-offs.

Parameter Comparison

Engineering Selection Recommendations

Direct Replacement (Active Status): ERJ-P14J332U and CRCW12103K30JNEA are functionally equivalent to ESR25JZPJ332 with identical electrical specifications except for reduced power rating (0.5W vs. 0.667W). Both maintain ±5% tolerance, ±200ppm/°C temperature coefficient, and AEC-Q200 automotive qualification. Selection between these two depends on manufacturer preference and supply availability.

Tolerance Upgrade (Active Status): ERJ-P14F3301U provides tighter tolerance (±1% vs. ±5%) and improved temperature coefficient (±100ppm/°C vs. ±200ppm/°C) while maintaining the same 1210 package and AEC-Q200 rating. Power rating is 0.5W. This part is suitable for applications requiring enhanced accuracy.

Legacy Part (Not For New Designs): ERJ-14YJ332U is functionally equivalent but designated "Not For New Designs." This part should not be selected for new circuit designs despite high inventory availability.

Frequently Asked Questions (FAQ)

Q: Can ERJ-P14J332U replace ESR25JZPJ332 directly? A: Yes. Both parts share identical resistance (3.3 kOhms), tolerance (±5%), package (1210), temperature range (-55°C to 155°C), and AEC-Q200 rating. The power rating difference (0.5W vs. 0.667W) is acceptable if circuit design does not require the full 0.667W dissipation capability.

Q: What is the difference between CRCW12103K30JNEA and ERJ-P14J332U? A: Both are electrically identical 3.3 kOhms ±5% 0.5W 1210 resistors with AEC-Q200 qualification. The difference is manufacturer (Vishay Dale vs. Panasonic). Selection depends on supply chain requirements and manufacturer preference.

Q: Can ERJ-P14F3301U be used instead of ESR25JZPJ332? A: Yes, with the following considerations: ERJ-P14F3301U offers superior tolerance (±1% vs. ±5%) and lower temperature coefficient (±100ppm/°C vs. ±200ppm/°C), making it suitable for precision applications. Power rating is 0.5W. The part is pin-compatible and maintains AEC-Q200 automotive qualification.

Q: Why is ERJ-14YJ332U listed but not recommended? A: ERJ-14YJ332U is designated "Not For New Designs" by the manufacturer. While electrically equivalent, this status indicates the part is in end-of-life phase. New designs should use active parts: ERJ-P14J332U, CRCW12103K30JNEA, or ERJ-P14F3301U.

Q: Are all substitute parts RoHS3 compliant? A: Yes. All listed parts, including the main part ESR25JZPJ332, are ROHS3 Compliant with MSL 1 (Unlimited) moisture sensitivity rating.

Q: Does package height variation affect PCB assembly? A: Package height differences are minimal (0.024" to 0.028" maximum seated height). All parts use the same 1210 (3225 Metric) footprint and are compatible with standard PCB assembly processes. Height variation does not affect electrical performance or mechanical fit.