ESR25JZPJ163 Equivalent & Substitute Parts

Part Overview

The ESR25JZPJ163 is a 16 kOhms ±5% thick film chip resistor manufactured by Rohm Semiconductor in the 1210 (3225 Metric) package. This component is rated for 0.667W (2/3W) power dissipation and meets AEC-Q200 automotive qualification standards with pulse withstanding capability. The part is currently active in production with 726 units in stock.

Substitute parts are necessary when the primary part becomes unavailable, when inventory constraints require alternative sourcing, or when design flexibility permits selection from multiple qualified manufacturers while maintaining electrical and mechanical compatibility.

Substiute Parts

ESR25JZPJ163

Rohm SemiconductorIn Stock: 772ESR25JZPJ163 Datasheet

Current PartRFQ

ERJ-P14J163U

Panasonic Electronic ComponentsIn Stock: 10980ERJ-P14J163U Datasheet

DirectRFQ

CRCW121016K0JNEA

Vishay DaleIn Stock: 15975CRCW121016K0JNEA Datasheet

UpgradeRFQ

ERJ-14YJ163U

Panasonic Electronic ComponentsIn Stock: 15816ERJ-14YJ163U Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ESR25JZPJ163 is determined by the following critical parameters:

• Resistance value: 16 kOhms (exact match required)
• Tolerance: ±5% (exact match required)
• Package / Case: 1210 (3225 Metric) (exact match required)
• Temperature Coefficient: ±200ppm/°C (exact match required)
• Operating Temperature Range: -55°C ~ 155°C (exact match required)
• Automotive Rating: AEC-Q200 (exact match required)
• Composition: Thick Film (exact match required)
• RoHS Status: ROHS3 Compliant (exact match required)

The substitute parts listed below meet all these criteria. Power rating variations are permitted when the substitute part rating equals or exceeds the application requirements. All substitute parts are sourced from qualified automotive component manufacturers and maintain full electrical and mechanical compatibility with the primary part.

Parameter Comparison

Engineering Selection Recommendations

All three substitute parts are electrically and mechanically compatible with the ESR25JZPJ163. Selection should be based on the following criteria:

ERJ-P14J163U (Panasonic Electronic Components) is an active production part suitable for new designs. This part maintains full AEC-Q200 compliance and automotive qualification. The 0.5W power rating is acceptable for applications where the circuit design does not require the full 0.667W capacity of the primary part.

CRCW121016K0JNEA (Vishay Dale) is an active production part suitable for new designs. This part offers the lowest seated height at 0.024" (0.60mm), which may provide advantages in space-constrained applications. Full AEC-Q200 compliance and automotive qualification are maintained.

ERJ-14YJ163U (Panasonic Electronic Components) carries a "Not For New Designs" product status. This part remains available for legacy system support and field replacements but should not be selected for new product development.

Frequently Asked Questions (FAQ)

Q: Can the ESR25JZPJ163 be replaced with a lower power-rated substitute?

A: Yes. The substitute parts ERJ-P14J163U and CRCW121016K0JNEA are rated at 0.5W (1/2W), which is lower than the primary part's 0.667W rating. These substitutes are acceptable provided the circuit design does not require power dissipation exceeding 0.5W at the specified operating temperature range.

Q: Are all substitute parts suitable for new product designs?

A: ERJ-P14J163U and CRCW121016K0JNEA are both active production parts suitable for new designs. ERJ-14YJ163U carries a "Not For New Designs" status and should be used only for legacy system support or field replacements.

Q: Do the substitute parts maintain the same package dimensions?

A: All substitute parts use the 1210 (3225 Metric) package with identical length and width dimensions (0.126" L x 0.098" W / 3.20mm x 2.50mm). Seated height varies slightly: ESR25JZPJ163 at 0.026" (0.65mm), ERJ-P14J163U at 0.028" (0.70mm), CRCW121016K0JNEA at 0.024" (0.60mm), and ERJ-14YJ163U at 0.028" (0.70mm). These variations are within standard PCB assembly tolerances.

Q: Are all parts RoHS3 compliant?

A: Yes. The ESR25JZPJ163 and all listed substitute parts are ROHS3 compliant with MSL rating of 1 (Unlimited).

Q: What is the difference between the Rohm and Panasonic versions?

A: Both manufacturers provide AEC-Q200 qualified thick film resistors with identical electrical specifications. The primary difference is manufacturer sourcing and inventory availability. Rohm's ESR25JZPJ163 is rated at 0.667W, while Panasonic's ERJ-P14J163U is rated at 0.5W.