ESR25JZPJ110 Equivalent & Substitute Parts

Part Overview

The ESR25JZPJ110 is a 11 Ohms ±5% thick film chip resistor manufactured by Rohm Semiconductor, rated for 0.667W (2/3W) power dissipation in a 1210 (3225 Metric) surface mount package. This component is designed for automotive applications and meets AEC-Q200 qualification standards with pulse withstanding capability. The part is currently in active production status. Substitute parts may be required due to inventory constraints, supply chain considerations, or design optimization needs while maintaining equivalent electrical and mechanical performance.

Substiute Parts

ESR25JZPJ110

Rohm SemiconductorIn Stock: 889ESR25JZPJ110 Datasheet

Current PartRFQ

ERJ-P14J110U

Panasonic Electronic ComponentsIn Stock: 11184ERJ-P14J110U Datasheet

DirectRFQ

ERJ-14YJ110U

Panasonic Electronic ComponentsIn Stock: 5843ERJ-14YJ110U Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ESR25JZPJ110 are qualified based on the following criteria:

Electrical Parameters (Must Match):

• Resistance value: 11 Ohms
• Tolerance: ±5%
• Temperature coefficient: ±200ppm/°C
• Operating temperature range: -55°C ~ 155°C

Mechanical Parameters (Must Match):

• Package / Case: 1210 (3225 Metric)
• Number of terminations: 2
• Composition: Thick Film

Compliance & Ratings (Must Match):

• AEC-Q200 automotive qualification
• RoHS3 compliance
• MSL 1 rating

Power Rating Consideration: Substitute parts with equal or greater power dissipation capacity (≥0.667W) are acceptable. The listed substitutes operate at 0.5W (1/2W), which is lower than the main part's 0.667W rating. These substitutes are valid for applications where the actual power dissipation does not exceed 0.5W.

Parameter Comparison

Engineering Selection Recommendations

ERJ-P14J110U (Direct Substitute): This Panasonic part is the primary substitute option. It maintains active production status and meets all electrical, mechanical, and compliance requirements. The 0.5W power rating is lower than the main part; this substitute is suitable for circuits where actual power dissipation remains within 0.5W limits. All automotive and RoHS certifications are maintained.

ERJ-14YJ110U (Upgrade Substitute): This part carries a "Not For New Designs" status, indicating it is in end-of-life phase. While it meets all technical specifications and compliance requirements, it is not recommended for new design implementations. This part may be used only for legacy system maintenance or replacement applications where the original part number is required.

Frequently Asked Questions (FAQ)

Q: Can ERJ-P14J110U be used as a direct replacement for ESR25JZPJ110?

A: Yes, ERJ-P14J110U is electrically and mechanically compatible. Both parts share identical resistance (11 Ohms), tolerance (±5%), temperature coefficient (±200ppm/°C), operating range (-55°C ~ 155°C), package (1210), and AEC-Q200 automotive qualification. The primary difference is power rating: ERJ-P14J110U is rated at 0.5W versus ESR25JZPJ110's 0.667W. Substitution is valid when circuit power dissipation does not exceed 0.5W.

Q: Why is ERJ-14YJ110U marked "Not For New Designs"?

A: This designation indicates the part is in end-of-life status and Panasonic is discontinuing production. While the part remains technically equivalent and compliant, it should not be selected for new product designs. Use this part only for maintenance, repair, or replacement of existing systems.

Q: Are all substitute parts AEC-Q200 qualified?

A: Yes. Both ERJ-P14J110U and ERJ-14YJ110U carry AEC-Q200 automotive qualification, matching the main part ESR25JZPJ110. All three parts are suitable for automotive applications requiring this certification level.

Q: What is the impact of the lower power rating on ERJ-P14J110U?

A: The 0.5W rating of ERJ-P14J110U is lower than the 0.667W rating of ESR25JZPJ110. This substitute is acceptable only when the actual power dissipation in the circuit remains at or below 0.5W. If circuit analysis indicates power dissipation exceeding 0.5W, this substitute is not appropriate.

Q: Are moisture sensitivity levels equivalent across all parts?

A: Yes. All three parts carry MSL 1 (Unlimited) rating, indicating no moisture sensitivity restrictions during storage or handling.

Q: Do all parts meet RoHS3 compliance?

A: Yes. ESR25JZPJ110, ERJ-P14J110U, and ERJ-14YJ110U are all ROHS3 compliant, meeting current environmental and hazardous substance restrictions.