ESR18EZPJ754 Equivalent & Substitute Parts

Part Overview

The ESR18EZPJ754 is a 750 kOhms ±5% thick film chip resistor in 1206 (3216 Metric) package rated for 0.5W power dissipation. Manufactured by Rohm Semiconductor, this component meets AEC-Q200 automotive qualification standards and features pulse withstanding capability. The part is currently active in production with 865 units in stock. Substitute parts may be required due to inventory constraints, supply chain optimization, or application-specific performance requirements within the allowed electrical and mechanical parameter ranges.

Substiute Parts

ESR18EZPJ754

Rohm SemiconductorIn Stock: 894ESR18EZPJ754 Datasheet

Current PartRFQ

ERJ-P08J754V

Panasonic Electronic ComponentsIn Stock: 10545ERJ-P08J754V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

The ERJ-P08J754V from Panasonic Electronic Components qualifies as a direct substitute based on the following critical parameters:

• Identical resistance value: 750 kOhms
• Identical tolerance: ±5%
• Identical package: 1206 (3216 Metric)
• Identical composition: Thick Film
• Identical temperature coefficient: ±200ppm/°C
• Identical operating temperature range: -55°C ~ 155°C
• Identical automotive qualification: AEC-Q200
• Identical RoHS compliance: ROHS3 Compliant
• Identical moisture sensitivity level: 1 (Unlimited)

The substitute part features a higher power rating (0.667W vs. 0.5W), which represents an upgrade capability within the same package footprint and does not introduce incompatibility with applications designed for the original part.

Parameter Comparison

Engineering Selection Recommendations

Both the ESR18EZPJ754 and ERJ-P08J754V are active production components with full AEC-Q200 automotive qualification and ROHS3 compliance. The ERJ-P08J754V provides higher power dissipation capability (0.667W vs. 0.5W) within an identical package footprint, making it suitable for applications requiring thermal margin or higher power handling. Both components maintain identical electrical characteristics, temperature stability, and environmental ratings. Selection between these parts should be based on inventory availability, supply chain lead times, and application power budget requirements.

Frequently Asked Questions (FAQ)

Q: Can ERJ-P08J754V replace ESR18EZPJ754 in existing designs?

A: Yes. The ERJ-P08J754V is electrically and mechanically compatible. Both parts share identical resistance, tolerance, package dimensions, temperature coefficient, and operating temperature range. The higher power rating of the substitute part does not create incompatibility.

Q: What is the difference in physical dimensions between these parts?

A: Both parts use the 1206 (3216 Metric) package with identical length (0.126" / 3.20mm) and width (0.063" / 1.60mm). The seated height differs slightly: ESR18EZPJ754 maximum 0.026" (0.65mm) versus ERJ-P08J754V maximum 0.028" (0.70mm). This 0.002" (0.05mm) difference is within standard PCB assembly tolerances.

Q: Are both parts suitable for automotive applications?

A: Yes. Both the ESR18EZPJ754 and ERJ-P08J754V carry AEC-Q200 automotive qualification, indicating compliance with automotive reliability and quality standards.

Q: What does the higher power rating on the substitute part mean?

A: The ERJ-P08J754V is rated for 0.667W continuous power dissipation compared to the ESR18EZPJ754 at 0.5W. This provides additional thermal headroom in applications where the original part operates near its power limit.

Q: Are moisture sensitivity levels identical?

A: Yes. Both parts are rated MSL 1 (Unlimited), indicating no moisture sensitivity restrictions for storage or handling.