ESR18EZPJ752 Equivalent & Substitute Parts

Part Overview

The ESR18EZPJ752 is a 7.5 kOhms ±5% 0.5W thick film chip resistor in 1206 (3216 Metric) package manufactured by Rohm Semiconductor. This automotive-grade component features AEC-Q200 certification and pulse withstanding capability, designed for high-reliability applications requiring stable resistance performance across extended temperature ranges. The part is currently active in production with 908 pieces in stock. Equivalent and substitute parts are identified to support design flexibility, inventory management, and supply chain continuity.

Substiute Parts

ESR18EZPJ752

Rohm SemiconductorIn Stock: 924ESR18EZPJ752 Datasheet

Current PartRFQ

CRCW12067K50JNEAHP

Vishay DaleIn Stock: 12387CRCW12067K50JNEAHP Datasheet

UpgradeRFQ

ERJ-P08J752V

Panasonic Electronic ComponentsIn Stock: 15987ERJ-P08J752V Datasheet

UpgradeRFQ

CRM1206-JW-752ELF

Bourns Inc.In Stock: 15484CRM1206-JW-752ELF Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ESR18EZPJ752 is determined by the following critical parameters: resistance value (7.5 kOhms), tolerance (±5%), package type (1206), composition (thick film), temperature coefficient (±200ppm/°C), and operating temperature range (-55°C ~ 155°C). Power rating may vary within acceptable limits for the application, provided the substitute meets or exceeds the original specification. All substitute parts must maintain ROHS3 compliance and MSL 1 rating. Automotive AEC-Q200 certification is required for direct equivalence; parts without this certification are classified as similar alternatives suitable only for non-automotive applications or where automotive qualification is not mandatory.

Parameter Comparison

Engineering Selection Recommendations

CRCW12067K50JNEAHP (Vishay Dale) and ERJ-P08J752V (Panasonic) are direct upgrade substitutes for the ESR18EZPJ752. Both parts maintain identical resistance, tolerance, temperature coefficient, and operating temperature specifications while offering increased power ratings (0.75W and 0.667W respectively). Both are AEC-Q200 certified and ROHS3 compliant, making them suitable for automotive and high-reliability applications without design modification.

CRM1206-JW-752ELF (Bourns Inc.) is a similar alternative with matching resistance, tolerance, temperature coefficient, and power rating. However, this part lacks specified AEC-Q200 automotive certification and features current sense capability rather than pulse withstanding. This part is suitable for non-automotive applications or designs where automotive qualification is not required. All four parts share identical package geometry, MSL rating, and RoHS compliance status, enabling direct footprint compatibility.

Frequently Asked Questions (FAQ)

Q: Can CRCW12067K50JNEAHP replace ESR18EZPJ752 in automotive applications? A: Yes. CRCW12067K50JNEAHP is an AEC-Q200 certified upgrade substitute with identical electrical parameters and higher power rating (0.75W vs. 0.5W). Direct substitution is permissible without design changes.

Q: What is the difference between upgrade and similar substitutes? A: Upgrade substitutes (CRCW12067K50JNEAHP, ERJ-P08J752V) maintain full AEC-Q200 automotive certification and pulse withstanding features. Similar substitutes (CRM1206-JW-752ELF) lack automotive certification and feature different application-specific characteristics (current sense). Selection depends on application requirements.

Q: Are all substitute parts physically compatible with the original footprint? A: Yes. All substitute parts use the 1206 (3216 Metric) package with identical termination count (2) and compatible height specifications (0.026" to 0.028" seated height). Direct PCB footprint compatibility is confirmed.

Q: Can CRM1206-JW-752ELF be used in automotive designs? A: CRM1206-JW-752ELF lacks specified AEC-Q200 certification. Use in automotive applications requires design review and qualification verification. For automotive designs, CRCW12067K50JNEAHP or ERJ-P08J752V are recommended.

Q: Do all parts meet RoHS and REACH compliance requirements? A: Yes. All parts listed are ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory standards.