ESR18EZPJ620 Equivalent & Substitute Parts

Part Overview

The ESR18EZPJ620 is a 62 Ohms ±5% 0.5W thick film chip resistor in 1206 (3216 Metric) package manufactured by Rohm Semiconductor. This component is rated for automotive applications under AEC-Q200 standard with pulse withstanding capability. The part is currently active in production with 715 pieces available in stock. Substitute parts are identified when equivalent electrical specifications and mechanical compatibility are required due to inventory constraints, supply chain considerations, or application-specific performance needs.

Substiute Parts

ESR18EZPJ620

Rohm SemiconductorIn Stock: 757ESR18EZPJ620 Datasheet

Current PartRFQ

CRCW120662R0JNEAHP

Vishay DaleIn Stock: 10667CRCW120662R0JNEAHP Datasheet

UpgradeRFQ

ERJ-P08J620V

Panasonic Electronic ComponentsIn Stock: 11333ERJ-P08J620V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ESR18EZPJ620 are qualified based on the following criteria:

Electrical Parameters (Must Match):

• Resistance value: 62 Ohms
• Tolerance: ±5%
• Temperature coefficient: ±200ppm/°C
• Operating temperature range: -55°C ~ 155°C

Mechanical Parameters (Must Match):

• Package / Case: 1206 (3216 Metric)
• Number of terminations: 2
• Composition: Thick Film

Compliance & Ratings (Must Match):

• Automotive AEC-Q200 certification
• Pulse withstanding capability
• RoHS3 compliance
• Moisture sensitivity level: 1

Allowable Variation:

• Power rating may be equal to or greater than 0.5W, provided all other parameters remain unchanged and the physical dimensions remain compatible with 1206 package constraints.

The identified substitutes meet all mandatory electrical, mechanical, and compliance requirements while offering alternative sourcing options from different manufacturers.

Parameter Comparison

Engineering Selection Recommendations

All three parts—ESR18EZPJ620, CRCW120662R0JNEAHP, and ERJ-P08J620V—are active production components with full AEC-Q200 automotive certification and RoHS3 compliance. Selection between these parts should be based on:

Inventory Availability: The ESR18EZPJ620 has 715 pieces in stock, while CRCW120662R0JNEAHP offers 10,651 pieces and ERJ-P08J620V offers 11,228 pieces. Higher inventory availability from substitute sources may reduce lead time risk.

Power Dissipation Margin: The CRCW120662R0JNEAHP (0.75W) and ERJ-P08J620V (0.667W) provide increased power dissipation capability compared to the original 0.5W rating. These substitutes are suitable for applications where thermal margin is beneficial, provided circuit design does not depend on the lower power rating.

Physical Dimensions: The CRCW120662R0JNEAHP has a slightly shorter length (3.10mm vs. 3.20mm) and identical height. The ERJ-P08J620V matches the original length but has a marginally greater height (0.70mm vs. 0.65mm). Both remain within 1206 package specifications and are suitable for standard PCB layouts.

Manufacturer Sourcing: All three manufacturers—Rohm Semiconductor, Vishay Dale, and Panasonic Electronic Components—are established suppliers with consistent quality and compliance certifications.

Frequently Asked Questions (FAQ)

Q: Can CRCW120662R0JNEAHP be used as a direct replacement for ESR18EZPJ620?

A: Yes. Both parts share identical resistance (62 Ohms), tolerance (±5%), temperature coefficient (±200ppm/°C), operating temperature range (-55°C ~ 155°C), package (1206), composition (thick film), and AEC-Q200 automotive certification. The CRCW120662R0JNEAHP has a higher power rating (0.75W vs. 0.5W), which provides additional thermal margin without affecting electrical performance in the circuit.

Q: Can ERJ-P08J620V be used as a direct replacement for ESR18EZPJ620?

A: Yes. Both parts meet all electrical and mechanical requirements: 62 Ohms ±5%, identical temperature coefficient, matching operating temperature range, 1206 package, thick film composition, and AEC-Q200 certification. The ERJ-P08J620V power rating (0.667W) exceeds the original specification, making it suitable for the same applications.

Q: Are there any physical compatibility concerns when substituting these parts?

A: All three parts use the 1206 (3216 Metric) package with two terminations. The CRCW120662R0JNEAHP has a length of 3.10mm (vs. 3.20mm original) and identical height (0.65mm). The ERJ-P08J620V matches the original length (3.20mm) but has a maximum seated height of 0.70mm (vs. 0.65mm original). These dimensional variations remain within 1206 package tolerances and are compatible with standard PCB layouts and automated assembly processes.

Q: Do all substitute parts maintain the same compliance certifications?

A: Yes. All three parts are RoHS3 compliant, AEC-Q200 rated for automotive applications, pulse withstanding, and have MSL rating of 1 (Unlimited). They are suitable for identical application environments and regulatory requirements.

Q: What is the significance of the higher power ratings in the substitute parts?

A: The substitute parts (0.75W and 0.667W) have higher power dissipation capability than the original 0.5W rating. This provides additional thermal margin in the circuit, reducing the risk of thermal stress during peak current conditions. The higher rating does not change the electrical behavior of the resistor and is fully backward compatible with designs specified for 0.5W components.