ESR18EZPJ360 Equivalent & Substitute Parts

Part Overview

The ESR18EZPJ360 is a 36 Ohm ±5% 0.5W thick film chip resistor in 1206 (3216 Metric) package manufactured by Rohm Semiconductor. This component is designed for automotive applications with AEC-Q200 qualification and pulse withstanding capability. The part is currently active in production with 5724 units in stock. Substitute parts are identified when equivalent electrical specifications and mechanical compatibility are maintained within the allowed parameter tolerances for this resistor category.

Substiute Parts

ESR18EZPJ360

Rohm SemiconductorIn Stock: 5771ESR18EZPJ360 Datasheet

Current PartRFQ

ERJ-P08J360V

Panasonic Electronic ComponentsIn Stock: 15952ERJ-P08J360V Datasheet

DirectRFQ

SR1206JR-7W36RL

YAGEOIn Stock: 8319SR1206JR-7W36RL Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the ESR18EZPJ360 is determined by strict equivalence in the following parameters:

• Resistance value: 36 Ohms
• Tolerance: ±5%
• Package: 1206 (3216 Metric)
• Composition: Thick Film
• Automotive qualification: AEC-Q200
• Operating temperature range: -55°C ~ 155°C
• RoHS3 compliance
• MSL rating: 1 (Unlimited)

Substitute parts may vary in power rating (0.5W or higher), temperature coefficient, and physical dimensions within the 1206 package envelope, provided all critical electrical and compliance parameters remain equivalent. Two substitute parts meet these criteria.

Parameter Comparison

Engineering Selection Recommendations

Both substitute parts are qualified alternatives to the ESR18EZPJ360 based on electrical equivalence and compliance certifications.

ERJ-P08J360V (Panasonic): This substitute offers higher power dissipation capability at 0.667W compared to the 0.5W rating of the main part. The identical temperature coefficient (±200ppm/°C) and full AEC-Q200 automotive qualification make this part suitable for applications requiring thermal margin. Higher inventory availability (15862 units) supports supply chain continuity.

SR1206JR-7W36RL (YAGEO): This substitute matches the 0.5W power rating of the main part and provides superior temperature stability with a ±100ppm/°C coefficient. AEC-Q200 qualification and ROHS3 compliance are maintained. Physical dimensions are within the 1206 package specification (3.10mm L vs. 3.20mm L for the main part).

Both substitutes maintain identical resistance, tolerance, package, composition, operating temperature range, and compliance ratings. Selection between substitutes depends on application-specific requirements for power dissipation margin and temperature coefficient performance.

Frequently Asked Questions (FAQ)

Q: Can ERJ-P08J360V be used as a direct replacement for ESR18EZPJ360?

A: Yes. The ERJ-P08J360V maintains all critical electrical parameters: 36 Ohm resistance, ±5% tolerance, 1206 package, thick film composition, AEC-Q200 qualification, and -55°C to 155°C operating range. The higher 0.667W power rating provides additional thermal capability without affecting circuit performance.

Q: What is the difference between the two substitute parts?

A: The primary differences are power rating and temperature coefficient. ERJ-P08J360V provides 0.667W (higher thermal margin), while SR1206JR-7W36RL matches the original 0.5W rating but offers superior temperature stability at ±100ppm/°C versus ±200ppm/°C. Both are electrically and mechanically equivalent.

Q: Are there physical dimension differences between these parts?

A: All three parts conform to the 1206 (3216 Metric) package standard. Minor variations exist within specification: ESR18EZPJ360 and ERJ-P08J360V measure 3.20mm length, while SR1206JR-7W36RL measures 3.10mm. Height differences (0.65mm to 0.70mm) are within 1206 package tolerance and do not affect PCB layout compatibility.

Q: Do all parts meet automotive qualification requirements?

A: Yes. ESR18EZPJ360, ERJ-P08J360V, and SR1206JR-7W36RL all carry AEC-Q200 qualification, confirming suitability for automotive applications.

Q: Are these parts RoHS compliant?

A: Yes. All three parts are ROHS3 compliant with MSL rating 1 (Unlimited moisture sensitivity level).