ESR18EZPJ162 Equivalent & Substitute Parts

Part Overview

The ESR18EZPJ162 is a 1.6 kOhms ±5% 0.5W chip resistor in 1206 (3216 Metric) package manufactured by Rohm Semiconductor. This thick film resistor is designed for automotive applications with AEC-Q200 qualification and pulse withstanding capability. The part is currently active in production with 3464 units in stock. Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and supply chain continuity.

Substiute Parts

ESR18EZPJ162

Rohm SemiconductorIn Stock: 3489ESR18EZPJ162 Datasheet

Current PartRFQ

ERJ-P08J162V

Panasonic Electronic ComponentsIn Stock: 22680ERJ-P08J162V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ESR18EZPJ162 is determined by the following critical parameters:

• Resistance value: 1.6 kOhms (exact match required)
• Tolerance: ±5% (exact match required)
• Package: 1206 (3216 Metric) (exact match required)
• Composition: Thick Film (exact match required)
• Temperature Coefficient: ±200ppm/°C (exact match required)
• Operating Temperature Range: -55°C ~ 155°C (exact match required)
• Automotive Rating: AEC-Q200 (exact match required)
• RoHS Status: ROHS3 Compliant (exact match required)

The ERJ-P08J162V from Panasonic Electronic Components meets all critical substitution criteria. While the power rating differs (0.667W vs. 0.5W), this represents an upgrade capability that maintains full compatibility within the specified electrical and mechanical parameters.

Parameter Comparison

Engineering Selection Recommendations

Both the ESR18EZPJ162 and ERJ-P08J162V are active production parts with full AEC-Q200 automotive qualification and ROHS3 compliance. Selection between these parts should be based on:

• Availability and lead time requirements
• Procurement cost considerations
• Thermal design margin requirements (the ERJ-P08J162V provides higher power dissipation capability at 0.667W versus 0.5W)
• Supplier preference and supply chain strategy

The dimensional compatibility (identical length and width, minimal height difference of 0.002") ensures direct PCB layout compatibility without design modification.

Frequently Asked Questions (FAQ)

Q: Can ERJ-P08J162V be used as a direct replacement for ESR18EZPJ162?

A: Yes. Both parts share identical resistance (1.6 kOhms), tolerance (±5%), package (1206), composition (thick film), temperature coefficient (±200ppm/°C), operating temperature range (-55°C ~ 155°C), and automotive qualification (AEC-Q200). The ERJ-P08J162V provides higher power rating (0.667W vs. 0.5W), which is compatible with applications designed for the ESR18EZPJ162.

Q: Are there any dimensional differences between these parts?

A: Length and width are identical at 0.126" L x 0.063" W (3.20mm x 1.60mm). Maximum seated height differs by 0.002" (0.65mm vs. 0.70mm), which does not affect PCB assembly or clearance in standard 1206 footprints.

Q: Do both parts meet automotive compliance requirements?

A: Yes. Both ESR18EZPJ162 and ERJ-P08J162V carry AEC-Q200 qualification, ROHS3 compliance, and REACH unaffected status. Both are suitable for automotive applications without additional qualification.

Q: What is the significance of the power rating difference?

A: The ERJ-P08J162V (0.667W) has higher power dissipation capability than the ESR18EZPJ162 (0.5W). This allows the Panasonic part to operate safely in applications with higher current or thermal stress while maintaining the same electrical characteristics.

Q: Are moisture sensitivity levels equivalent?

A: Yes. Both parts have MSL 1 (Unlimited), indicating no moisture sensitivity restrictions for storage, handling, or assembly processes.