ESR18EZPJ110 Equivalent & Substitute Parts

Part Overview

The ESR18EZPJ110 is an 11 Ohm ±5% 0.5W thick film chip resistor in 1206 (3216 Metric) package manufactured by Rohm Semiconductor. This automotive-grade component meets AEC-Q200 qualification and features pulse withstanding capability, making it suitable for demanding automotive and industrial applications. The part is currently active in production with 1105 pieces available in stock.

Equivalent and substitute parts are identified when design requirements allow for variations in tolerance, power rating, or manufacturer while maintaining core electrical and mechanical compatibility within the 1206 package footprint and automotive qualification standards.

Substiute Parts

ESR18EZPJ110

Rohm SemiconductorIn Stock: 1132ESR18EZPJ110 Datasheet

Current PartRFQ

ESR18EZPF11R0

Rohm SemiconductorIn Stock: 255457ESR18EZPF11R0 Datasheet

UpgradeRFQ

CRCW120611R0JNEAHP

Vishay DaleIn Stock: 10501CRCW120611R0JNEAHP Datasheet

UpgradeRFQ

ERJ-P08J110V

Panasonic Electronic ComponentsIn Stock: 11339ERJ-P08J110V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ESR18EZPJ110 is determined by the following criteria:

Core Compatibility Requirements:

• Resistance value: 11 Ohms (exact match required)
• Package: 1206 (3216 Metric) form factor
• Composition: Thick film construction
• Automotive qualification: AEC-Q200 compliance
• Operating temperature range: -55°C ~ 155°C minimum
• RoHS3 compliance
• MSL rating: 1 (Unlimited)

Allowable Variations:

• Tolerance: ±5% or tighter (±1% acceptable as upgrade)
• Power rating: Equal to or greater than 0.5W
• Temperature coefficient: ±200ppm/°C or better
• Manufacturer: Different manufacturers permitted if all above criteria met

Three substitute parts meet these criteria with specific trade-offs in tolerance and power dissipation capability.

Parameter Comparison

Engineering Selection Recommendations

ESR18EZPF11R0 (Rohm Semiconductor) Select this substitute when tighter tolerance control is required. The ±1% tolerance and improved temperature coefficient (±100ppm/°C) provide superior accuracy compared to the original ±5% specification. Power rating remains at 0.5W, matching the original part exactly. Extensive stock availability (255,400 pieces) supports high-volume applications. Maintains identical package dimensions and automotive AEC-Q200 qualification.

CRCW120611R0JNEAHP (Vishay Dale) Select this substitute when higher power dissipation capability is needed within the same 1206 package. The 0.75W rating provides 50% additional power handling compared to the 0.5W original specification. Tolerance and temperature coefficient remain equivalent to the original part. Packaging format differs (Cut Tape & Digi-Reel® versus Tape & Reel), which may affect procurement and assembly processes. Maintains full AEC-Q200 automotive qualification.

ERJ-P08J110V (Panasonic Electronic Components) Select this substitute when intermediate power rating is required. The 0.667W (2/3W) rating provides approximately 33% additional power capacity over the original 0.5W specification. Tolerance and temperature coefficient match the original part. Maintains identical package footprint and automotive AEC-Q200 qualification. Tape & Reel packaging format aligns with standard assembly processes.

All substitute parts maintain full compliance with RoHS3, REACH, and automotive qualification requirements. Selection should be based on specific circuit requirements for tolerance, power dissipation, and supply chain considerations.

Frequently Asked Questions (FAQ)

Q: Can ESR18EZPF11R0 be used as a direct replacement for ESR18EZPJ110? A: Yes. Both parts share identical resistance (11 Ohms), package (1206), power rating (0.5W), and automotive qualification (AEC-Q200). The ESR18EZPF11R0 offers improved tolerance (±1% versus ±5%) and better temperature coefficient (±100ppm/°C versus ±200ppm/°C), making it a compatible upgrade.

Q: What is the primary difference between CRCW120611R0JNEAHP and the original ESR18EZPJ110? A: The primary difference is power rating. CRCW120611R0JNEAHP is rated at 0.75W compared to the original 0.5W. Both maintain 11 Ohm resistance, ±5% tolerance, 1206 package, and AEC-Q200 qualification. The higher power rating allows greater thermal dissipation in the same physical footprint.

Q: Are all substitute parts available in the same packaging format? A: No. ESR18EZPJ110, ESR18EZPF11R0, and ERJ-P08J110V are supplied in Tape & Reel (TR) format. CRCW120611R0JNEAHP is supplied in Cut Tape (CT) & Digi-Reel® format. Verify packaging compatibility with your assembly process before selection.

Q: Do all substitute parts meet automotive AEC-Q200 qualification? A: Yes. All three substitute parts (ESR18EZPF11R0, CRCW120611R0JNEAHP, and ERJ-P08J110V) carry AEC-Q200 automotive qualification and maintain the operating temperature range of -55°C ~ 155°C.

Q: Which substitute offers the best tolerance specification? A: ESR18EZPF11R0 offers ±1% tolerance compared to ±5% for the original part and other substitutes. This tighter tolerance is beneficial for precision circuit applications requiring strict resistance value control.

Q: Can ERJ-P08J110V replace ESR18EZPJ110 in high-power applications? A: ERJ-P08J110V is rated at 0.667W, providing approximately 33% more power capacity than the original 0.5W specification. It is suitable for applications requiring moderate power increase while maintaining the 1206 package footprint and automotive qualification.

Q: What is the moisture sensitivity level for all parts? A: All parts, including the original ESR18EZPJ110 and all substitutes, carry MSL rating 1 (Unlimited), indicating no moisture sensitivity restrictions during storage or handling.