ESR18EZPJ000 Equivalent & Substitute Parts

Part Overview

The ESR18EZPJ000 is a 0 Ohms jumper chip resistor in 1206 (3216 Metric) package manufactured by Rohm Semiconductor. This automotive-grade component features AEC-Q200 qualification and pulse withstanding capability in thick film construction. The part is discontinued at DiGi Electronics, necessitating identification of equivalent alternatives that maintain electrical and mechanical compatibility for ongoing production and repair applications.

Substiute Parts

ESR18EZPJ000

Rohm SemiconductorIn Stock: 867ESR18EZPJ000 Datasheet

Current PartRFQ

RCS12060000Z0EA

Vishay DaleIn Stock: 78625RCS12060000Z0EA Datasheet

DirectRFQ

CRCW12060000Z0EAHP

Vishay DaleIn Stock: 9978CRCW12060000Z0EAHP Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ESR18EZPJ000 is determined by the following critical parameters:

• Resistance Value: Must be 0 Ohms (jumper configuration)
• Package Type: Must be 1206 (3216 Metric) to ensure PCB footprint compatibility
• Composition: Thick film construction maintains electrical performance characteristics
• Operating Temperature Range: Must support -55°C ~ 155°C minimum
• Automotive Compliance: AEC-Q200 qualification required for automotive applications
• RoHS Compliance: ROHS3 Compliant status mandatory
• Moisture Sensitivity: MSL 1 (Unlimited) acceptable

Two substitute parts meet these criteria:

1. RCS12060000Z0EA (Vishay Dale) – Direct equivalent with identical specifications and active product status
2. CRCW12060000Z0EAHP (Vishay Dale) – Upgrade option with enhanced power rating capability

Parameter Comparison

Engineering Selection Recommendations

RCS12060000Z0EA is the direct equivalent substitute. It maintains identical electrical and mechanical specifications to the ESR18EZPJ000 while offering active product status and higher inventory availability (78,586 pcs). This part is suitable for direct replacement in all applications where the original component was specified.

CRCW12060000Z0EAHP is an upgrade option within the same package family. While it meets all critical substitution parameters, it features a slightly reduced length (0.122" vs 0.126") and belongs to the CRCW-HP series. This part is appropriate for applications where the dimensional tolerance and series change are acceptable.

Both substitutes maintain AEC-Q200 automotive qualification, ROHS3 compliance, and identical operating temperature ranges, ensuring functional compatibility in automotive and industrial applications.

Frequently Asked Questions (FAQ)

Q: Can RCS12060000Z0EA be used as a direct replacement for ESR18EZPJ000?

A: Yes. RCS12060000Z0EA meets all critical substitution parameters: identical 0 Ohms resistance, 1206 package, thick film composition, -55°C ~ 155°C operating range, AEC-Q200 rating, ROHS3 compliance, and MSL 1 rating. Footprint and electrical performance are equivalent.

Q: What is the difference between RCS12060000Z0EA and CRCW12060000Z0EAHP?

A: Both are 0 Ohms jumper resistors in 1206 package with AEC-Q200 rating. The primary difference is physical dimension: CRCW12060000Z0EAHP has a length of 0.122" compared to 0.126" for RCS12060000Z0EA. Both meet the height requirement of 0.026" maximum. The CRCW-HP series designation indicates enhanced power rating capability.

Q: Are there packaging differences between the substitute parts?

A: Yes. RCS12060000Z0EA is supplied in Tape & Reel (TR) packaging, while CRCW12060000Z0EAHP is supplied in Cut Tape (CT) & Digi-Reel® packaging. Both packaging formats are standard for SMD component distribution and do not affect component performance.

Q: Do both substitutes meet automotive compliance requirements?

A: Yes. Both RCS12060000Z0EA and CRCW12060000Z0EAHP carry AEC-Q200 qualification and ROHS3 compliance, matching the original ESR18EZPJ000 specifications for automotive applications.

Q: What is the moisture sensitivity level for these parts?

A: All three parts (original and both substitutes) have MSL 1 (Unlimited) rating, indicating no moisture sensitivity restrictions during storage or handling.