ESR10EZPJ911 Equivalent & Substitute Parts

Part Overview

The ESR10EZPJ911 is a 910 Ohms ±5% 0.4W thick film chip resistor in 0805 (2012 Metric) package manufactured by Rohm Semiconductor. This component is designed for automotive applications with AEC-Q200 qualification and pulse withstanding capability. The part is currently active in production with 4661 units in stock. Equivalent and substitute parts are identified when component availability is limited, supply chain disruptions occur, or design flexibility permits higher power ratings within the same electrical and mechanical specifications.

Substiute Parts

ESR10EZPJ911

Rohm SemiconductorIn Stock: 4763ESR10EZPJ911 Datasheet

Current PartRFQ

ERJ-P06J911V

Panasonic Electronic ComponentsIn Stock: 8457ERJ-P06J911V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the ESR10EZPJ911 is permissible when the replacement component maintains the following critical parameters:

• Resistance value: 910 Ohms
• Tolerance: ±5%
• Package: 0805 (2012 Metric)
• Composition: Thick Film
• Temperature Coefficient: ±200ppm/°C
• Operating Temperature Range: -55°C ~ 155°C
• Automotive Rating: AEC-Q200
• Features: Pulse Withstanding
• RoHS Compliance: ROHS3 Compliant

The power rating may be increased from 0.4W to 0.5W or higher, as this represents an upgrade in thermal capability without compromising electrical performance or mechanical fit. Physical dimensions remain identical within the 0805 package specification.

Parameter Comparison

Engineering Selection Recommendations

The ERJ-P06J911V from Panasonic Electronic Components is a direct substitute for the ESR10EZPJ911. Both components share identical electrical specifications, package dimensions, and automotive compliance certifications. The primary difference is the increased power rating of 0.5W versus 0.4W, which provides enhanced thermal performance without affecting circuit compatibility or PCB layout requirements.

Selection between these components should be based on availability, supply chain considerations, and design margin requirements. Both parts maintain ROHS3 compliance, AEC-Q200 automotive qualification, and unlimited moisture sensitivity rating. The marginal height difference (0.026" versus 0.028") is within standard PCB assembly tolerances and does not impact component placement or soldering processes.

Frequently Asked Questions (FAQ)

Q: Can the ERJ-P06J911V replace the ESR10EZPJ911 in automotive applications?

A: Yes. Both components are AEC-Q200 qualified with identical electrical parameters, operating temperature range, and package specifications. The higher power rating of the Panasonic part represents an upgrade in thermal capability.

Q: Are there any PCB layout or assembly differences between these parts?

A: No. Both components use the 0805 (2012 Metric) package with identical length and width dimensions. The height difference of 0.002" (0.05mm) is negligible for standard PCB assembly processes.

Q: Do both parts meet the same compliance standards?

A: Yes. Both the ESR10EZPJ911 and ERJ-P06J911V are ROHS3 compliant, REACH unaffected, and carry MSL 1 (Unlimited) moisture sensitivity rating.

Q: What is the significance of the power rating difference?

A: The 0.5W rating of the ERJ-P06J911V provides greater thermal headroom than the 0.4W rating of the ESR10EZPJ911. This allows the Panasonic component to dissipate higher power levels without exceeding maximum junction temperature, making it suitable for applications with higher current demands.

Q: Are the temperature coefficients identical?

A: Yes. Both components have a temperature coefficient of ±200ppm/°C and operate across the same temperature range of -55°C to 155°C.

Q: Can these parts be used interchangeably in production?

A: Yes, provided that the circuit design accommodates the electrical and thermal specifications of either component. The identical package, resistance value, tolerance, and automotive ratings ensure mechanical and electrical compatibility.