ESR10EZPJ910 Equivalent & Substitute Parts

Part Overview

The ESR10EZPJ910 is a 91 Ohms ±5% 0.4W thick film chip resistor in 0805 (2012 Metric) package manufactured by Rohm Semiconductor. This component is designed for automotive applications with AEC-Q200 qualification and pulse withstanding capability. The part is currently in active production status with 2339 units available in inventory. Equivalent and substitute parts are identified when design requirements allow for alternative manufacturers or when higher power ratings are acceptable for the application.

Substiute Parts

ESR10EZPJ910

Rohm SemiconductorIn Stock: 2375ESR10EZPJ910 Datasheet

Current PartRFQ

ERJ-P06J910V

Panasonic Electronic ComponentsIn Stock: 15629ERJ-P06J910V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the ESR10EZPJ910 is permissible when the following conditions are met:

The substitute part must maintain identical electrical specifications: 91 Ohms resistance value and ±5% tolerance. The substitute must be compatible with the 0805 (2012 Metric) package footprint and land pattern. The substitute must support the same operating temperature range of -55°C to 155°C. The substitute must retain AEC-Q200 automotive qualification and pulse withstanding characteristics. The substitute must maintain thick film composition and ±200ppm/°C temperature coefficient. The substitute must be ROHS3 compliant with MSL 1 rating.

The ERJ-P06J910V from Panasonic Electronic Components qualifies as a direct substitute based on these criteria. The primary difference is an increased power rating of 0.5W (1/2W) compared to the original 0.4W specification, which represents an upgrade in thermal capability without affecting electrical performance or mechanical compatibility.

Parameter Comparison

Engineering Selection Recommendations

Both the ESR10EZPJ910 and ERJ-P06J910V are active production components with full AEC-Q200 automotive qualification. Selection between these parts should be based on application power dissipation requirements and supply chain availability. The ERJ-P06J910V offers increased power handling capability at 0.5W versus 0.4W, making it suitable for applications where thermal margin is a consideration. Both components maintain identical electrical characteristics, temperature performance, and compliance certifications. The marginal height difference of 0.002" (0.05mm) between the two parts is negligible for standard PCB assembly processes.

Frequently Asked Questions (FAQ)

Q: Can the ERJ-P06J910V replace the ESR10EZPJ910 in existing designs?

A: Yes. The ERJ-P06J910V is electrically and mechanically compatible. The increased power rating of 0.5W provides additional thermal capability without affecting circuit performance. The 0.002" height difference is within standard PCB assembly tolerances.

Q: Are there any compliance or certification differences between these parts?

A: No. Both parts carry identical AEC-Q200 automotive qualification, ROHS3 compliance, and MSL 1 moisture sensitivity rating. Both maintain pulse withstanding capability and thick film construction.

Q: What determines whether a substitute part is acceptable?

A: Substitution is valid when resistance value, tolerance, package footprint, operating temperature range, automotive rating, and compliance certifications remain identical. Power rating upgrades are acceptable when the substitute rating meets or exceeds the original specification.

Q: Are there inventory considerations for these parts?

A: The ESR10EZPJ910 has 2339 units in stock, while the ERJ-P06J910V has 15616 units available. Supply chain requirements may influence part selection.

Q: Do these parts require different handling or storage procedures?

A: No. Both parts share MSL 1 (Unlimited) moisture sensitivity rating, requiring identical storage and handling protocols.