ESR10EZPJ822 Equivalent & Substitute Parts

Part Overview

The ESR10EZPJ822 is an 8.2 kOhms ±5% 0.4W thick film chip resistor in 0805 (2012 Metric) package manufactured by Rohm Semiconductor. This component is rated for automotive applications under AEC-Q200 standard with pulse withstanding capability. The part is currently active in production with 4136 units in stock. Substitute parts are necessary when the original manufacturer part becomes unavailable, when design requirements call for upgraded power ratings, or when alternative qualified suppliers are preferred for supply chain resilience.

Key Parameters

Parameter	Value
Resistance	8.2 kOhms
Tolerance	±5%
Power Rating	0.4W
Package	0805 (2012 Metric)
Composition	Thick Film
Temperature Coefficient	±200ppm/°C
Operating Temperature Range	-55°C ~ 155°C
Automotive Rating	AEC-Q200
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the ESR10EZPJ822 is determined by the following critical parameters:

Core Electrical Parameters (Must Match):

Resistance value: 8.2 kOhms
Tolerance: ±5%
Temperature coefficient: ±200ppm/°C
Operating temperature range: -55°C ~ 155°C

Mechanical Parameters (Must Match):

Package type: 0805 (2012 Metric)
Number of terminations: 2
Composition: Thick Film

Compliance Parameters (Must Match):

Automotive rating: AEC-Q200
RoHS status: ROHS3 Compliant
Moisture sensitivity level: 1 (Unlimited)

Upgradeable Parameter:

Power rating: 0.4W (original) can be substituted with 0.5W (higher rating acceptable for same footprint)

All four substitute parts meet these criteria. The power rating upgrade from 0.4W to 0.5W is permissible as it provides additional thermal margin without affecting electrical performance or physical dimensions.

Parameter Comparison

Parameter	ESR10EZPJ822 (Rohm)	ERJ-P06J822V (Panasonic)	CRCW08058K20JNEAHP (Vishay Dale)	ERJ-P6WJ822V (Panasonic)	ERJ-UP6J822V (Panasonic)
Manufacturer	Rohm Semiconductor	Panasonic Electronic Components	Vishay Dale	Panasonic Electronic Components	Panasonic Electronic Components
Resistance	8.2 kOhms	8.2 kOhms	8.2 kOhms	8.2 kOhms	8.2 kOhms
Tolerance	±5%	±5%	±5%	±5%	±5%
Power Rating	0.4W	0.5W	0.5W	0.5W	0.5W
Package	0805 (2012 Metric)	0805 (2012 Metric)	0805 (2012 Metric)	0805 (2012 Metric)	0805 (2012 Metric)
Composition	Thick Film	Thick Film	Thick Film	Thick Film	Thick Film
Temperature Coefficient	±200ppm/°C	±200ppm/°C	±200ppm/°C	±200ppm/°C	±200ppm/°C
Operating Temperature	-55°C ~ 155°C	-55°C ~ 155°C	-55°C ~ 155°C	-55°C ~ 155°C	-55°C ~ 155°C
AEC-Q200 Rating	Yes	Yes	Yes	Yes	Yes
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
MSL Rating	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
Product Status	Active	Active	Active	Not For New Designs	Active
Height - Seated (Max)	0.026" (0.65mm)	0.028" (0.70mm)	0.020" (0.50mm)	0.030" (0.75mm)	0.028" (0.70mm)

Engineering Selection Recommendations

Primary Substitutes (Active Status):

ERJ-P06J822V, CRCW08058K20JNEAHP, and ERJ-UP6J822V are all suitable direct substitutes with active product status. These parts maintain full electrical and mechanical compatibility with the ESR10EZPJ822 while providing upgraded 0.5W power ratings. Selection among these three should be based on supply chain availability and preferred supplier qualification.

ERJ-UP6J822V offers an additional anti-sulfur feature beyond the standard AEC-Q200 automotive qualification, providing enhanced environmental protection in corrosive atmospheres.

Secondary Substitute (Legacy Status):

ERJ-P6WJ822V is electrically and mechanically compatible but carries a "Not For New Designs" product status. This part should only be selected when existing inventory must be consumed or when design revisions are not feasible. For new designs, selection should be limited to parts with active status.

Height Consideration:

CRCW08058K20JNEAHP has the lowest seated height at 0.020" (0.50mm), which may be advantageous for space-constrained applications. ERJ-P6WJ822V has the highest seated height at 0.030" (0.75mm) and should be verified against PCB clearance requirements.

Frequently Asked Questions (FAQ)

Q: Can I substitute the ESR10EZPJ822 with a higher power-rated resistor?

A: Yes. The substitute parts rated at 0.5W are directly compatible with circuits designed for the 0.4W ESR10EZPJ822. The higher power rating provides additional thermal margin and does not affect electrical performance or physical footprint in the 0805 package.

Q: Are all substitute parts automotive-qualified?

A: Yes. All four substitute parts carry AEC-Q200 automotive qualification, matching the original ESR10EZPJ822 specification.

Q: What is the difference between ERJ-UP6J822V and ERJ-P06J822V?

A: Both parts are electrically and mechanically identical with 8.2 kOhms ±5% resistance and 0.5W power rating. ERJ-UP6J822V includes anti-sulfur protection as an additional feature. Both are manufactured by Panasonic and carry active product status.

Q: Why is ERJ-P6WJ822V marked "Not For New Designs"?

A: This designation indicates the part is in legacy status. While it remains functionally compatible and available in inventory, Panasonic recommends using active-status alternatives for new circuit designs to ensure long-term supply continuity.

Q: Do all substitute parts have the same physical dimensions?

A: All parts share the same 0805 (2012 Metric) package footprint of 0.079" L x 0.049" W (2.00mm x 1.25mm). Seated heights vary between 0.020" and 0.030" (0.50mm to 0.75mm). Verify PCB clearance requirements if height is a constraint.

Q: Are all parts RoHS3 compliant?

A: Yes. The ESR10EZPJ822 and all four substitute parts are ROHS3 compliant with MSL rating of 1 (Unlimited), meeting environmental and regulatory requirements for automotive and industrial applications.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message