ESR10EZPJ754 Equivalent & Substitute Parts

Part Overview

The ESR10EZPJ754 is a 750 kOhms ±5% thick film chip resistor in 0805 (2012 Metric) package manufactured by Rohm Semiconductor. This component is rated for automotive applications under AEC-Q200 standard with pulse withstanding capability and operates across -55°C to 155°C. The part is currently active in production with ROHS3 compliance and unlimited moisture sensitivity rating (MSL 1). Substitute parts are identified when equivalent electrical specifications, mechanical compatibility, and automotive certifications align with the original component requirements.

Substiute Parts

ESR10EZPJ754

Rohm SemiconductorIn Stock: 994ESR10EZPJ754 Datasheet

Current PartRFQ

ERJ-P06J754V

Panasonic Electronic ComponentsIn Stock: 12496ERJ-P06J754V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ESR10EZPJ754 is determined by the following critical parameters:

Resistance value must be 750 kOhms with ±5% tolerance to maintain circuit function. Package must be 0805 (2012 Metric) for mechanical and electrical compatibility on the PCB. Composition must be thick film to preserve thermal and frequency response characteristics. Temperature coefficient of ±200ppm/°C ensures predictable performance across the operating range of -55°C to 155°C. AEC-Q200 automotive certification is required for applications demanding automotive-grade reliability. Power rating may be equal to or greater than 0.4W without circuit impact. All substitute parts must maintain ROHS3 compliance and MSL 1 rating.

The ERJ-P06J754V from Panasonic Electronic Components meets all substitution criteria with identical electrical specifications and automotive certifications, with a higher power rating of 0.5W (1/2W).

Parameter Comparison

Engineering Selection Recommendations

The ERJ-P06J754V qualifies as a direct substitute for the ESR10EZPJ754 based on matching electrical specifications, identical package dimensions, and equivalent automotive certifications. Both components are active products with ROHS3 compliance and unlimited moisture sensitivity rating. The ERJ-P06J754V provides a higher power rating of 0.5W compared to the 0.4W of the original part, which does not create circuit incompatibility. The maximum seated height difference of 0.002" (0.05mm) between the two components is within typical PCB assembly tolerances and does not affect mechanical fit or electrical performance.

Frequently Asked Questions (FAQ)

Q: Can the ERJ-P06J754V replace the ESR10EZPJ754 in automotive applications?

A: Yes. Both components meet AEC-Q200 automotive standards, operate across -55°C to 155°C, and share identical resistance, tolerance, and temperature coefficient specifications. The higher power rating of the substitute does not create functional issues.

Q: Are there package compatibility concerns between these two parts?

A: No. Both components use the 0805 (2012 Metric) package with identical length and width dimensions of 0.079" x 0.049" (2.00mm x 1.25mm). The maximum seated height difference of 0.002" (0.05mm) is within standard PCB assembly tolerances.

Q: Do both parts meet the same compliance standards?

A: Yes. Both the ESR10EZPJ754 and ERJ-P06J754V are ROHS3 compliant with MSL 1 (unlimited) moisture sensitivity rating, REACH unaffected status, and EAR99 export classification.

Q: What determines if a resistor can substitute for the ESR10EZPJ754?

A: Substitution requires matching resistance value (750 kOhms), tolerance (±5%), package (0805), composition (thick film), temperature coefficient (±200ppm/°C), operating temperature range (-55°C to 155°C), and AEC-Q200 automotive certification. Power rating may be equal to or greater than 0.4W.

Q: Is the higher power rating of the ERJ-P06J754V a concern?

A: No. A higher power rating provides additional thermal margin and does not negatively impact circuit performance. The component will operate safely within the circuit's power dissipation requirements.