ESR10EZPJ753 Equivalent & Substitute Parts

Part Overview

The ESR10EZPJ753 is a 75 kOhms ±5% thick film chip resistor in 0805 (2012 Metric) package manufactured by Rohm Semiconductor. This component is rated for 0.4W power dissipation and meets automotive AEC-Q200 qualification with pulse withstanding capability. The part is active in production status with ROHS3 compliance and unlimited moisture sensitivity level (MSL 1). Substitute parts are identified when equivalent electrical specifications, mechanical compatibility, and automotive certifications align with the original component requirements.

Substiute Parts

ESR10EZPJ753

Rohm SemiconductorIn Stock: 939ESR10EZPJ753 Datasheet

Current PartRFQ

ERJ-P06J753V

Panasonic Electronic ComponentsIn Stock: 12087ERJ-P06J753V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ESR10EZPJ753 is determined by the following critical parameters:

• Resistance value: 75 kOhms (exact match required)
• Tolerance: ±5% (exact match required)
• Package: 0805 (2012 Metric) (exact match required)
• Composition: Thick Film (exact match required)
• Temperature Coefficient: ±200ppm/°C (exact match required)
• Operating Temperature Range: -55°C ~ 155°C (exact match or better required)
• Automotive Rating: AEC-Q200 (exact match required)
• Power Rating: Equal or greater than 0.4W (upgrade acceptable)
• RoHS Status: ROHS3 Compliant (exact match required)
• Moisture Sensitivity Level: 1 (exact match required)

The ERJ-P06J753V from Panasonic Electronic Components meets all substitution criteria with an upgraded power rating of 0.5W, which exceeds the original 0.4W specification while maintaining all other electrical and mechanical parameters.

Parameter Comparison

Engineering Selection Recommendations

The ERJ-P06J753V is a direct substitute for the ESR10EZPJ753. Both components are active production parts with ROHS3 compliance and AEC-Q200 automotive qualification. The Panasonic ERJ-P06J753V provides an upgraded power rating of 0.5W compared to the original 0.4W specification, which is acceptable for substitution as it maintains or exceeds the thermal performance envelope. Physical dimensions remain compatible with 0805 package footprints, with a maximum height difference of 0.002" (0.05mm) that does not impact PCB assembly or clearance requirements. Both parts maintain identical electrical characteristics including resistance value, tolerance, temperature coefficient, and operating temperature range.

Frequently Asked Questions (FAQ)

Q: Can the ERJ-P06J753V replace the ESR10EZPJ753 in automotive applications?

A: Yes. Both components meet AEC-Q200 automotive qualification and maintain identical electrical specifications including 75 kOhms resistance, ±5% tolerance, ±200ppm/°C temperature coefficient, and -55°C ~ 155°C operating range. The upgraded 0.5W power rating of the Panasonic part does not compromise compatibility.

Q: Are there physical compatibility concerns between these parts?

A: No. Both components use the 0805 (2012 Metric) package with identical footprint dimensions of 0.079" L x 0.049" W (2.00mm x 1.25mm). The maximum seated height difference is 0.002" (0.05mm), which does not affect PCB assembly, component placement, or clearance requirements.

Q: Do both parts meet the same compliance standards?

A: Yes. Both the ESR10EZPJ753 and ERJ-P06J753V are ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity level. Both components carry REACH Unaffected status and EAR99 export classification.

Q: What is the primary difference between these substitute parts?

A: The primary difference is the power rating. The ESR10EZPJ753 is rated for 0.4W, while the ERJ-P06J753V is rated for 0.5W. This represents an upgrade that maintains full compatibility while providing additional thermal margin.

Q: Are the temperature coefficients identical?

A: Yes. Both components specify ±200ppm/°C temperature coefficient and operate across the identical -55°C ~ 155°C temperature range.