ESR10EZPJ620 Equivalent & Substitute Parts

Part Overview

The ESR10EZPJ620 is a 62 Ohms ±5% 0.4W thick film chip resistor in 0805 (2012 Metric) package manufactured by Rohm Semiconductor. This component is designed for automotive applications with AEC-Q200 qualification and pulse withstanding capability. The part is currently active in production with substantial inventory availability. Equivalent and substitute parts are identified to support procurement flexibility, design redundancy, and supply chain continuity.

Substiute Parts

ESR10EZPJ620

Rohm SemiconductorIn Stock: 5407ESR10EZPJ620 Datasheet

Current PartRFQ

ERJ-P06J620V

Panasonic Electronic ComponentsIn Stock: 144160ERJ-P06J620V Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the ESR10EZPJ620 is determined by strict equivalence across the following critical parameters:

• Resistance value: 62 Ohms
• Tolerance: ±5%
• Package type: 0805 (2012 Metric)
• Composition: Thick Film
• Temperature coefficient: ±200ppm/°C
• Operating temperature range: -55°C ~ 155°C
• Automotive qualification: AEC-Q200
• Pulse withstanding capability

The ERJ-P06J620V from Panasonic Electronic Components meets all substitution criteria. The primary difference is the power rating: the substitute part is rated at 0.5W (1/2W) compared to the main part's 0.4W (2/5W). Since the substitute has a higher power rating, it is functionally compatible for applications requiring the ESR10EZPJ620.

Parameter Comparison

Engineering Selection Recommendations

Both the ESR10EZPJ620 and ERJ-P06J620V are active production components with full AEC-Q200 automotive qualification and ROHS3 compliance. The ERJ-P06J620V is suitable as a direct substitute due to its higher power rating, which provides additional thermal margin in the application. Both components maintain identical electrical characteristics including resistance, tolerance, temperature coefficient, and operating temperature range. The minimal height difference (0.65mm vs 0.028mm) does not impact PCB layout compatibility for standard 0805 footprints. Selection between these parts should be based on availability, lead time, and procurement cost considerations.

Frequently Asked Questions (FAQ)

Q: Can the ERJ-P06J620V replace the ESR10EZPJ620 in my design?

A: Yes. The ERJ-P06J620V is a direct substitute. Both parts share identical resistance (62 Ohms), tolerance (±5%), package (0805), composition (thick film), temperature coefficient (±200ppm/°C), operating temperature range (-55°C ~ 155°C), and automotive qualification (AEC-Q200). The substitute has a higher power rating (0.5W vs 0.4W), which is compatible with applications designed for the original part.

Q: Are there any physical differences between these parts?

A: Both parts use the 0805 (2012 Metric) package with identical length and width (2.00mm x 1.25mm). The seated height differs slightly: ESR10EZPJ620 is 0.65mm maximum, while ERJ-P06J620V is 0.70mm maximum. This difference does not affect standard PCB assembly or component placement.

Q: Do both parts meet automotive standards?

A: Yes. Both the ESR10EZPJ620 and ERJ-P06J620V carry AEC-Q200 qualification and are suitable for automotive applications. Both are ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating.

Q: What is the temperature coefficient specification?

A: Both parts have a temperature coefficient of ±200ppm/°C and operate across the range of -55°C to 155°C, meeting automotive temperature requirements.

Q: Can I use these parts interchangeably on the same PCB?

A: Yes. Both parts are mechanically and electrically compatible for the same 0805 footprint. No design changes are required for substitution.