ESR10EZPJ563 Equivalent & Substitute Parts

Part Overview

The ESR10EZPJ563 is a 56 kOhms ±5% thick film chip resistor manufactured by Rohm Semiconductor in 0805 (2012 Metric) package format. This component is rated for 0.4W power dissipation and meets AEC-Q200 automotive qualification standards with pulse withstanding capability. The part is currently in active production status with 993 units in stock.

Substitute parts are necessary when the original manufacturer discontinues production, when design requirements demand higher power ratings, improved tolerance specifications, or when enhanced environmental protection features such as anti-sulfur coating are required for specific applications.

Substiute Parts

ESR10EZPJ563

Rohm SemiconductorIn Stock: 1026ESR10EZPJ563 Datasheet

Current PartRFQ

ERJ-P06J563V

Panasonic Electronic ComponentsIn Stock: 19234ERJ-P06J563V Datasheet

UpgradeRFQ

ERJ-P6WF5602V

Panasonic Electronic ComponentsIn Stock: 1658ERJ-P6WF5602V Datasheet

UpgradeRFQ

ERJ-P6WJ563V

Panasonic Electronic ComponentsIn Stock: 5482ERJ-P6WJ563V Datasheet

UpgradeRFQ

ERJ-UP6J563V

Panasonic Electronic ComponentsIn Stock: 5913ERJ-UP6J563V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ESR10EZPJ563 is determined by the following criteria:

Mandatory Matching Parameters:

• Resistance value: 56 kOhms
• Package format: 0805 (2012 Metric)
• Composition: Thick Film
• Temperature coefficient: ±200ppm/°C
• Operating temperature range: -55°C to 155°C
• Automotive qualification: AEC-Q200
• RoHS compliance: ROHS3 Compliant
• Moisture sensitivity: MSL 1

Allowable Variations:

• Tolerance: ±5% (original) to ±1% (tighter tolerance acceptable)
• Power rating: 0.4W (original) to 0.5W or higher (increased rating acceptable)
• Features: Standard pulse withstanding to enhanced features such as anti-sulfur coating

All four substitute parts meet the mandatory matching parameters. Variations in tolerance and power rating represent upgrades that maintain or exceed the original specification requirements.

Parameter Comparison

Engineering Selection Recommendations

For New Designs: Select ERJ-P06J563V or ERJ-UP6J563V. Both parts are in active production status and provide 0.5W power rating with identical electrical specifications to the original ESR10EZPJ563. The ERJ-UP6J563V offers additional anti-sulfur protection suitable for harsh environmental conditions. Both maintain full AEC-Q200 compliance and ROHS3 certification.

For Existing Designs Requiring Higher Tolerance Precision: The ERJ-P6WF5602V provides ±1% tolerance specification while maintaining all other electrical and thermal characteristics. This part carries "Not For New Designs" status but remains available in inventory. Use only when tolerance improvement is a documented design requirement.

For Legacy Production Support: The ERJ-P6WJ563V remains available with identical electrical specifications to the original part. This part is marked "Not For New Designs" and should be used only for sustaining production of existing designs where component qualification has already been completed.

Height Consideration: The ESR10EZPJ563 has a maximum seated height of 0.026" (0.65mm). All substitute parts have slightly increased heights ranging from 0.028" to 0.030". Verify PCB layout clearance before substitution in space-constrained applications.

Frequently Asked Questions (FAQ)

Q: Can ERJ-P06J563V directly replace ESR10EZPJ563 in production? A: Yes. Both parts share identical resistance, tolerance, temperature coefficient, operating range, and AEC-Q200 qualification. The ERJ-P06J563V provides higher power rating (0.5W vs 0.4W), which is a functional upgrade. Verify PCB height clearance due to 0.002" (0.05mm) increase in seated height.

Q: What is the difference between ERJ-P6WJ563V and ERJ-UP6J563V? A: Both parts have identical electrical specifications (56 kOhms ±5%, 0.5W). The ERJ-UP6J563V includes anti-sulfur coating for enhanced environmental protection. ERJ-UP6J563V is in active production; ERJ-P6WJ563V is marked "Not For New Designs."

Q: Why is ERJ-P6WF5602V marked "Not For New Designs"? A: This designation indicates the manufacturer is phasing out this product line. While the part remains available in inventory (1565 units), it should be used only for sustaining existing production where component qualification is already established. For new designs, select ERJ-P06J563V or ERJ-UP6J563V.

Q: Are all substitute parts automotive qualified? A: Yes. All four substitute parts meet AEC-Q200 automotive qualification standards and are ROHS3 compliant with MSL 1 moisture sensitivity rating, matching the original ESR10EZPJ563 specifications.

Q: Can I use a substitute part with ±1% tolerance in place of ±5%? A: Yes. The ERJ-P6WF5602V with ±1% tolerance is a functional upgrade that provides tighter tolerance control. This substitution is acceptable in all applications where the original ±5% tolerance was specified.

Q: What is the maximum height constraint for PCB layout? A: The original ESR10EZPJ563 has a maximum seated height of 0.026" (0.65mm). Substitute parts range from 0.028" to 0.030" (0.70mm to 0.75mm). Verify clearance in designs with height-sensitive layouts, such as under-component routing or low-profile assemblies.