ESR10EZPJ363 Equivalent & Substitute Parts

Part Overview

The ESR10EZPJ363 is a 36 kOhms ±5% thick film chip resistor manufactured by Rohm Semiconductor in the 0805 (2012 Metric) package. This component is rated for automotive applications under AEC-Q200 with pulse withstanding capability and operates across -55°C to 155°C. The part is currently active in production with ROHS3 compliance and unlimited moisture sensitivity rating (MSL 1). Substitute parts are identified when equivalent electrical specifications and mechanical compatibility are maintained within the allowed parameter tolerances for this resistor category.

Substiute Parts

ESR10EZPJ363

Rohm SemiconductorIn Stock: 5038ESR10EZPJ363 Datasheet

Current PartRFQ

ERJ-P06J363V

Panasonic Electronic ComponentsIn Stock: 18621ERJ-P06J363V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the ESR10EZPJ363 is determined by the following criteria:

• Resistance value must be 36 kOhms
• Tolerance must be ±5%
• Package must be 0805 (2012 Metric)
• Composition must be thick film
• Temperature coefficient must be ±200ppm/°C
• Operating temperature range must be -55°C ~ 155°C
• Automotive AEC-Q200 rating must be maintained
• RoHS3 compliance must be present

The ERJ-P06J363V from Panasonic Electronic Components meets all these criteria. The power rating difference (0.5W versus 0.4W) represents an upgrade in thermal capability while maintaining all other electrical and mechanical specifications.

Parameter Comparison

Engineering Selection Recommendations

The ERJ-P06J363V is a direct substitute for the ESR10EZPJ363. Both components maintain identical electrical specifications including resistance, tolerance, temperature coefficient, and operating temperature range. Both are AEC-Q200 rated for automotive applications and ROHS3 compliant. The ERJ-P06J363V provides increased power dissipation capability (0.5W versus 0.4W) with a marginal height increase of 0.002" (0.05mm), which remains within standard PCB assembly tolerances for 0805 packages. Selection between these parts depends on supply availability and application thermal requirements.

Frequently Asked Questions (FAQ)

Q: Can the ERJ-P06J363V replace the ESR10EZPJ363 in existing designs?

A: Yes. The ERJ-P06J363V is mechanically and electrically compatible. Both components use the 0805 package with identical length and width dimensions. The height difference of 0.002" is negligible for standard PCB assembly processes.

Q: What is the significance of the power rating difference?

A: The ERJ-P06J363V has a higher power rating (0.5W versus 0.4W). This represents improved thermal performance and allows operation at higher power dissipation levels without exceeding temperature limits. In applications where the ESR10EZPJ363 operates within its 0.4W specification, the ERJ-P06J363V will perform identically.

Q: Are both parts suitable for automotive applications?

A: Yes. Both the ESR10EZPJ363 and ERJ-P06J363V carry AEC-Q200 automotive qualification and are suitable for automotive-grade circuit designs.

Q: Do these parts have different moisture sensitivity requirements?

A: No. Both components have MSL 1 (Unlimited) rating, indicating no moisture sensitivity restrictions for storage or handling.

Q: Are there any compliance differences between these parts?

A: No. Both parts are ROHS3 compliant, REACH unaffected, and classified under the same ECCN (EAR99) and HTSUS codes.