ESR10EZPJ362 Equivalent & Substitute Parts

Part Overview

The ESR10EZPJ362 is a 3.6 kOhms ±5% thick film chip resistor manufactured by Rohm Semiconductor in 0805 (2012 Metric) package format. This component is rated for 0.4W power dissipation and meets AEC-Q200 automotive qualification standards with pulse withstanding capability. The part is currently active in production with 4815 units in stock. Substitute parts are identified when equivalent electrical performance and mechanical compatibility can be maintained within the specified parameter tolerances for automotive and industrial applications.

Substiute Parts

ESR10EZPJ362

Rohm SemiconductorIn Stock: 4859ESR10EZPJ362 Datasheet

Current PartRFQ

ESR10EZPF3601

Rohm SemiconductorIn Stock: 5397ESR10EZPF3601 Datasheet

UpgradeRFQ

ERJ-P06J362V

Panasonic Electronic ComponentsIn Stock: 1567ERJ-P06J362V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ESR10EZPJ362 are qualified based on the following criteria:

Electrical Compatibility: Resistance value must be 3.6 kOhms. Tolerance may be tighter (±1%) without affecting substitution validity, as this represents improved performance. Temperature coefficient and operating temperature range must meet or exceed the original specification.

Mechanical Compatibility: Package format must be 0805 (2012 Metric) with identical footprint dimensions (0.079" L x 0.049" W / 2.00mm x 1.25mm). Height variation within seated maximum limits is acceptable.

Power Rating: Substitute parts must maintain minimum 0.4W power rating. Higher power ratings (0.5W) are acceptable as they provide additional thermal margin.

Compliance & Certification: All substitutes must maintain AEC-Q200 automotive qualification, ROHS3 compliance, and MSL 1 rating to ensure equivalent reliability in target applications.

Identified Substitutes:

• ESR10EZPF3601 (Rohm Semiconductor): Tighter tolerance variant with identical electrical and mechanical specifications
• ERJ-P06J362V (Panasonic Electronic Components): Equivalent tolerance with higher power rating and compatible package

Parameter Comparison

Engineering Selection Recommendations

ESR10EZPF3601 Selection: This Rohm Semiconductor part provides direct substitution with improved tolerance specification (±1% versus ±5%). Both parts share identical manufacturer, package, power rating, and thermal characteristics. Selection is appropriate when tighter resistance tolerance is required for precision circuit applications while maintaining equivalent AEC-Q200 automotive qualification and ROHS3 compliance.

ERJ-P06J362V Selection: This Panasonic Electronic Components part maintains equivalent electrical specifications with identical tolerance and temperature coefficient. The 0.5W power rating provides additional thermal margin compared to the 0.4W original specification. Package compatibility is confirmed through identical 0805 (2012 Metric) footprint dimensions. Selection is appropriate when higher power dissipation capability or Panasonic component sourcing is required, with full AEC-Q200 and ROHS3 compliance maintained.

Both substitutes maintain identical operating temperature range (-55°C to 155°C), MSL 1 rating, and automotive qualification standards required for equivalent circuit performance.

Frequently Asked Questions (FAQ)

Q: Can ESR10EZPF3601 be used as a direct replacement for ESR10EZPJ362?

A: Yes. Both parts are manufactured by Rohm Semiconductor with identical 3.6 kOhms resistance, 0.4W power rating, 0805 package, and AEC-Q200 qualification. The ESR10EZPF3601 features tighter ±1% tolerance compared to ±5%, representing improved performance without compatibility issues.

Q: What is the difference between ESR10EZPJ362 and ERJ-P06J362V?

A: Both parts share identical 3.6 kOhms resistance, ±5% tolerance, and 0805 package format. The primary differences are manufacturer (Rohm versus Panasonic) and power rating (0.4W versus 0.5W). The ERJ-P06J362V provides additional thermal margin with higher power rating while maintaining equivalent electrical performance and automotive qualification.

Q: Are all three parts compatible with the same PCB footprint?

A: Yes. All three parts use the 0805 (2012 Metric) package with identical footprint dimensions of 0.079" L x 0.049" W (2.00mm x 1.25mm). Height variations (0.026" maximum for ESR10EZPJ362 and ESR10EZPF3601, 0.028" maximum for ERJ-P06J362V) are within acceptable assembly tolerances.

Q: Do all substitute parts maintain automotive qualification?

A: Yes. ESR10EZPF3601 and ERJ-P06J362V both carry AEC-Q200 automotive qualification identical to the original ESR10EZPJ362, ensuring equivalent reliability for automotive and industrial applications.

Q: What is the impact of tolerance differences on circuit performance?

A: The ESR10EZPF3601 provides ±1% tolerance compared to ±5% for the original part. This tighter tolerance reduces resistance variation and improves circuit predictability in precision applications. Both tolerances are acceptable for standard circuit designs; selection depends on specific circuit requirements.

Q: Are packaging format differences significant for procurement?

A: ESR10EZPJ362 and ESR10EZPF3601 are supplied in Tape & Reel (TR) format, while ERJ-P06J362V is available in Cut Tape (CT) and Digi-Reel® format. Format selection depends on assembly equipment compatibility and procurement volume requirements. All formats are suitable for automated pick-and-place assembly.