ESR10EZPJ244 Equivalent & Substitute Parts

Part Overview

The ESR10EZPJ244 is a 240 kOhms ±5% thick film chip resistor in 0805 (2012 Metric) package manufactured by Rohm Semiconductor. This component is rated for 0.4W power dissipation and meets automotive AEC-Q200 qualification with pulse withstanding capability. The part is active in production status with ROHS3 compliance and unlimited moisture sensitivity level (MSL 1). Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and automotive certifications align with the original component requirements.

Substiute Parts

ESR10EZPJ244

Rohm SemiconductorIn Stock: 910ESR10EZPJ244 Datasheet

Current PartRFQ

ERJ-P06J244V

Panasonic Electronic ComponentsIn Stock: 16685ERJ-P06J244V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ESR10EZPJ244 is determined by the following critical parameters:

Resistance value must be 240 kOhms with ±5% tolerance. Package must be 0805 (2012 Metric) to ensure mechanical and electrical compatibility on printed circuit boards. Composition must be thick film. Temperature coefficient must be ±200ppm/°C. Operating temperature range must span -55°C to 155°C. Automotive AEC-Q200 qualification is required. Pulse withstanding capability must be present. RoHS3 compliance and MSL 1 rating must be maintained.

The ERJ-P06J244V from Panasonic Electronic Components meets all substitution criteria. While the power rating is 0.5W (1/2W) compared to the original 0.4W (2/5W), this represents a higher power capability and does not restrict substitution in applications designed for the original component. All other electrical, mechanical, and compliance parameters are identical.

Parameter Comparison

Engineering Selection Recommendations

The ERJ-P06J244V is a direct substitute for the ESR10EZPJ244 based on active production status, identical AEC-Q200 automotive qualification, and matching ROHS3 compliance. Both components maintain the same electrical performance characteristics across the specified operating temperature range. The increased power rating of the substitute part (0.5W versus 0.4W) provides additional thermal margin without affecting circuit functionality. Both components carry unlimited moisture sensitivity level (MSL 1), eliminating moisture-related handling constraints. The maximum seated height difference of 0.002" (0.05mm) is negligible for standard PCB assembly processes.

Frequently Asked Questions (FAQ)

Q: Can the ERJ-P06J244V replace the ESR10EZPJ244 in automotive applications?

A: Yes. Both components meet AEC-Q200 automotive qualification and maintain identical electrical specifications including resistance value, tolerance, temperature coefficient, and operating temperature range. Active production status is confirmed for both parts.

Q: Does the higher power rating of the ERJ-P06J244V (0.5W) affect compatibility?

A: No. A higher power rating does not restrict substitution. The substitute component can safely handle the same or lower power dissipation as the original design without performance degradation.

Q: Are the physical dimensions compatible for PCB assembly?

A: Yes. Both components use the 0805 (2012 Metric) package with identical length and width (0.079" x 0.049"). The seated height difference is 0.002" (0.05mm), which is within standard PCB assembly tolerances and does not affect placement or soldering.

Q: Do both parts meet the same compliance standards?

A: Yes. Both the ESR10EZPJ244 and ERJ-P06J244V are ROHS3 compliant with MSL 1 (unlimited) moisture sensitivity level. Both carry AEC-Q200 automotive qualification and pulse withstanding capability.

Q: What is the temperature coefficient specification for both parts?

A: Both components have a temperature coefficient of ±200ppm/°C and operate across the identical temperature range of -55°C to 155°C.