ESR10EZPJ204 Equivalent & Substitute Parts

Part Overview

The ESR10EZPJ204 is a 200 kOhms ±5% thick film chip resistor in 0805 (2012 Metric) package manufactured by Rohm Semiconductor. This component is rated for automotive applications under AEC-Q200 standard with pulse withstanding capability. The part is currently active in production with 5300 units in stock. Equivalent and substitute parts are identified for applications requiring alternative sourcing, inventory management, or specific performance characteristics within the defined electrical and mechanical parameters.

Substiute Parts

ESR10EZPJ204

Rohm SemiconductorIn Stock: 5339ESR10EZPJ204 Datasheet

Current PartRFQ

ERJ-P06J204V

Panasonic Electronic ComponentsIn Stock: 17138ERJ-P06J204V Datasheet

DirectRFQ

CRCW0805200KJNEAHP

Vishay DaleIn Stock: 6097CRCW0805200KJNEAHP Datasheet

UpgradeRFQ

RPC0805JT200K

Stackpole Electronics IncIn Stock: 4913RPC0805JT200K Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ESR10EZPJ204 are qualified based on the following criteria:

Electrical Parameters (Must Match):

• Resistance value: 200 kOhms
• Tolerance: ±5%
• Composition: Thick Film
• Temperature Coefficient: ±200ppm/°C or better
• Operating Temperature Range: -55°C to 155°C minimum

Mechanical Parameters (Must Match):

• Package: 0805 (2012 Metric)
• Number of Terminations: 2
• Physical dimensions: 0.079" L x 0.049" W (2.00mm x 1.25mm)

Compliance Parameters (Must Match):

• Automotive Rating: AEC-Q200
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: MSL 1

Allowable Variation:

• Power Rating: May be equal to or greater than 0.4W
• Height (Seated): Variation within standard manufacturing tolerances

Three substitute parts meet these criteria with variations in power rating and temperature coefficient as noted in the parameter comparison table.

Parameter Comparison

Engineering Selection Recommendations

All three substitute parts are qualified alternatives to the ESR10EZPJ204 based on matching electrical specifications, package dimensions, and automotive compliance requirements.

ERJ-P06J204V (Panasonic): Direct equivalent with increased power rating (0.5W vs 0.4W). Maintains identical temperature coefficient and operating range. Highest inventory availability at 17111 units.

CRCW0805200KJNEAHP (Vishay Dale): Upgrade option with increased power rating (0.5W vs 0.4W) and reduced seated height (0.020" vs 0.026"). Maintains identical temperature coefficient and operating range.

RPC0805JT200K (Stackpole Electronics): Substitute with lower power rating (0.25W vs 0.4W) and improved temperature coefficient (±100ppm/°C vs ±200ppm/°C). Suitable for applications where power dissipation is not a limiting factor and tighter temperature stability is beneficial.

All parts maintain AEC-Q200 automotive qualification, ROHS3 compliance, and MSL 1 rating. Selection should be based on application power requirements, thermal management constraints, and temperature stability specifications.

Frequently Asked Questions (FAQ)

Q: Can RPC0805JT200K be used as a direct replacement for ESR10EZPJ204?

A: RPC0805JT200K is electrically and mechanically compatible. However, its 0.25W power rating is lower than the main part's 0.4W rating. Use this substitute only in applications where power dissipation does not exceed 0.25W.

Q: What is the difference between the substitute parts in terms of power handling?

A: ERJ-P06J204V and CRCW0805200KJNEAHP both provide 0.5W power rating, exceeding the main part's 0.4W specification. RPC0805JT200K provides 0.25W, which is lower. Select based on your circuit's actual power dissipation requirements.

Q: Are all substitute parts suitable for automotive applications?

A: Yes. All three substitute parts carry AEC-Q200 automotive qualification, matching the main part's rating. All are ROHS3 compliant and rated MSL 1.

Q: Does the height difference between parts affect PCB layout?

A: Height variations range from 0.020" to 0.028" (0.50mm to 0.70mm). These differences are within standard 0805 package tolerances and should not affect typical PCB designs. Verify clearance requirements for your specific application if height-constrained.

Q: Which substitute offers the best temperature stability?

A: RPC0805JT200K provides ±100ppm/°C temperature coefficient, superior to the main part and other substitutes at ±200ppm/°C. Select this part for applications requiring tighter temperature stability, provided power rating requirements are met.

Q: Can I use these parts interchangeably in production?

A: Yes, within the constraints of your application's power and temperature requirements. All parts share identical resistance, tolerance, package, and automotive compliance specifications. Verify power dissipation and thermal performance for your specific circuit before qualification.