ESR10EZPJ184 Equivalent & Substitute Parts

Part Overview

The ESR10EZPJ184 is a 180 kOhms ±5% thick film chip resistor manufactured by Rohm Semiconductor in 0805 (2012 Metric) package format. This component is rated for automotive applications under AEC-Q200 standard with pulse withstanding capability and 0.4W power rating. The part is currently in active production status with 5098 units in stock. Substitute parts are necessary when design requirements demand higher power ratings, improved tolerance specifications, or when primary part availability is constrained.

Substiute Parts

ESR10EZPJ184

Rohm SemiconductorIn Stock: 5191ESR10EZPJ184 Datasheet

Current PartRFQ

ERJ-P06J184V

Panasonic Electronic ComponentsIn Stock: 21963ERJ-P06J184V Datasheet

UpgradeRFQ

ERJ-P6WF1803V

Panasonic Electronic ComponentsIn Stock: 1498ERJ-P6WF1803V Datasheet

UpgradeRFQ

ERJ-P6WJ184V

Panasonic Electronic ComponentsIn Stock: 4325ERJ-P6WJ184V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ESR10EZPJ184 is determined by the following criteria:

Core Compatibility Requirements:

• Resistance value: 180 kOhms (exact match required)
• Package format: 0805 (2012 Metric) (exact match required)
• Composition: Thick Film (exact match required)
• Temperature Coefficient: ±200ppm/°C (exact match required)
• Operating Temperature Range: -55°C ~ 155°C (exact match required)
• Automotive Rating: AEC-Q200 (exact match required)

Allowable Variations:

• Tolerance: ±5% or tighter (±1% acceptable as upgrade)
• Power Rating: 0.4W or higher (0.5W acceptable as upgrade)
• Manufacturer: Different manufacturers permitted if all core parameters match
• Product Status: Active or Not For New Designs both acceptable for substitution

The three substitute parts listed below meet all core compatibility requirements while offering either equivalent or enhanced specifications.

Parameter Comparison

Engineering Selection Recommendations

ERJ-P06J184V (Panasonic): This part is functionally equivalent to the ESR10EZPJ184 with identical tolerance (±5%) and improved power rating (0.5W vs 0.4W). The part maintains Active product status and all automotive certifications. This is the primary substitute option for new designs requiring higher power margin or when ESR10EZPJ184 availability is limited.

ERJ-P6WJ184V (Panasonic): This part offers equivalent specifications to ERJ-P06J184V with identical tolerance and power rating. However, it carries Not For New Designs status, making it suitable only for legacy design updates or maintenance applications where the original part is no longer available.

ERJ-P6WF1803V (Panasonic): This part provides improved tolerance specification (±1% vs ±5%) with equivalent power rating (0.5W). It is designated Not For New Designs. Selection of this part is appropriate only when tighter tolerance requirements are mandated by circuit design specifications and the Not For New Designs status is acceptable for the application timeline.

All three substitute parts maintain full AEC-Q200 automotive compliance, ROHS3 compliance, and MSL 1 rating, ensuring compatibility with automotive and industrial applications requiring these certifications.

Frequently Asked Questions (FAQ)

Q: Can ERJ-P06J184V be used as a direct replacement for ESR10EZPJ184?

A: Yes. Both parts share identical resistance (180 kOhms), tolerance (±5%), package (0805), composition (Thick Film), temperature coefficient (±200ppm/°C), operating range (-55°C ~ 155°C), and AEC-Q200 rating. The ERJ-P06J184V offers higher power rating (0.5W vs 0.4W), making it a compatible upgrade.

Q: What is the difference between the three substitute parts?

A: ERJ-P06J184V and ERJ-P6WJ184V are functionally identical with 0.5W power rating and ±5% tolerance. ERJ-P6WF1803V differs by offering ±1% tolerance instead of ±5%. The primary distinction is product status: ERJ-P06J184V is Active, while ERJ-P6WJ184V and ERJ-P6WF1803V are Not For New Designs.

Q: Can I use ERJ-P6WF1803V if my design requires ±5% tolerance?

A: Yes. ERJ-P6WF1803V with ±1% tolerance exceeds the ±5% requirement and is electrically compatible. Tighter tolerance provides improved circuit performance without compromising functionality.

Q: Are all substitute parts automotive-qualified?

A: Yes. All substitute parts carry AEC-Q200 automotive qualification, ROHS3 compliance, and MSL 1 rating, matching the original ESR10EZPJ184 specifications.

Q: What does "Not For New Designs" status mean?

A: This designation indicates the manufacturer is not recommending the part for new circuit designs. These parts remain available for existing designs and legacy applications but should not be selected for new development projects. ERJ-P06J184V (Active status) is the preferred choice for new designs.

Q: Is the 0805 package dimension identical across all parts?

A: Yes. All parts use the 0805 (2012 Metric) package with identical footprint dimensions (0.079" L x 0.049" W / 2.00mm x 1.25mm). Height variations are minimal (0.026" to 0.030" seated height) and do not affect PCB layout compatibility.