ESR10EZPJ164 Equivalent & Substitute Parts

Part Overview

The ESR10EZPJ164 is a 160 kOhms ±5% thick film chip resistor manufactured by Rohm Semiconductor in the 0805 (2012 Metric) package. This component is rated for 0.4W power dissipation and meets automotive AEC-Q200 qualification with pulse withstanding capability. The part is currently active in production with ROHS3 compliance and unlimited moisture sensitivity rating (MSL 1). Substitute parts are identified when equivalent electrical specifications, mechanical compatibility, and automotive certifications align with the original component requirements.

Substiute Parts

ESR10EZPJ164

Rohm SemiconductorIn Stock: 829ESR10EZPJ164 Datasheet

Current PartRFQ

ERJ-P06J164V

Panasonic Electronic ComponentsIn Stock: 17400ERJ-P06J164V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ESR10EZPJ164 is determined by the following critical parameters:

Resistance value must be 160 kOhms with ±5% tolerance to maintain circuit function and signal integrity. Package must be 0805 (2012 Metric) to ensure mechanical fit and thermal performance on the PCB. Power rating must be equal to or greater than 0.4W to handle the same thermal load without derating. Temperature coefficient must remain ±200ppm/°C to preserve frequency stability and circuit accuracy across the operating range of -55°C to 155°C. Automotive AEC-Q200 qualification is required for applications demanding reliability in automotive environments. Composition must be thick film to maintain consistency with the original design's electrical characteristics. RoHS3 compliance and MSL 1 rating ensure regulatory conformance and handling compatibility.

The ERJ-P06J164V from Panasonic Electronic Components meets all substitution criteria with identical resistance, tolerance, package, temperature coefficient, operating temperature range, AEC-Q200 rating, RoHS3 compliance, and MSL 1 rating. The power rating of 0.5W exceeds the minimum 0.4W requirement, providing additional thermal margin.

Parameter Comparison

Engineering Selection Recommendations

The ERJ-P06J164V qualifies as a direct substitute for the ESR10EZPJ164 based on matching electrical specifications, identical package geometry, and equivalent automotive certifications. Both components maintain AEC-Q200 qualification, ROHS3 compliance, and MSL 1 rating. The substitute part's 0.5W power rating provides thermal margin above the original 0.4W specification, supporting reliable operation under identical circuit conditions. Height variation of 0.05mm (0.70mm versus 0.65mm) remains within standard PCB assembly tolerances and does not impact mechanical fit or thermal performance. Selection between these parts may be determined by inventory availability, lead time, or cost considerations, as electrical and mechanical performance are equivalent.

Frequently Asked Questions (FAQ)

Q: Can the ERJ-P06J164V replace the ESR10EZPJ164 in automotive applications?

A: Yes. Both components carry AEC-Q200 automotive qualification, identical resistance and tolerance specifications, matching temperature coefficients, and equivalent operating temperature ranges. The substitute part meets all automotive reliability requirements.

Q: Does the higher power rating of the ERJ-P06J164V affect circuit performance?

A: No. A higher power rating does not degrade circuit performance. The 0.5W rating of the substitute part provides additional thermal margin and supports the same maximum current and voltage conditions as the original 0.4W component.

Q: Are there package compatibility concerns between these parts?

A: No. Both components use the 0805 (2012 Metric) package with identical length and width dimensions (2.00mm x 1.25mm). The height difference of 0.05mm is within standard PCB assembly tolerances and does not affect placement or soldering.

Q: Do both parts meet the same regulatory and compliance standards?

A: Yes. Both the ESR10EZPJ164 and ERJ-P06J164V are ROHS3 compliant, carry MSL 1 (unlimited) moisture sensitivity rating, and meet AEC-Q200 automotive qualification standards.

Q: What determines substitution eligibility for this resistor?

A: Substitution requires matching resistance value (160 kOhms), tolerance (±5%), package (0805), temperature coefficient (±200ppm/°C), operating temperature range (-55°C to 155°C), and automotive certifications (AEC-Q200). Power rating must equal or exceed 0.4W. Composition must remain thick film.