ESR10EZPJ163 Equivalent & Substitute Parts

Part Overview

The ESR10EZPJ163 is a 16 kOhms ±5% thick film chip resistor manufactured by Rohm Semiconductor in the 0805 (2012 Metric) package. This component is rated for automotive applications under AEC-Q200 and features pulse withstanding capability with a power rating of 0.4W. The part is currently active in production with 805 units in stock. Substitute parts are identified when equivalent electrical specifications, mechanical compatibility, and automotive certifications align with the original component requirements.

Substiute Parts

ESR10EZPJ163

Rohm SemiconductorIn Stock: 851ESR10EZPJ163 Datasheet

Current PartRFQ

ERJ-P06J163V

Panasonic Electronic ComponentsIn Stock: 3795ERJ-P06J163V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ESR10EZPJ163 is determined by the following critical parameters:

• Resistance value: 16 kOhms (exact match required)
• Tolerance: ±5% (exact match required)
• Package: 0805 (2012 Metric) (exact match required)
• Composition: Thick Film (exact match required)
• Temperature Coefficient: ±200ppm/°C (exact match required)
• Operating Temperature Range: -55°C ~ 155°C (exact match or better required)
• Automotive Rating: AEC-Q200 (exact match required)
• Power Rating: Equal to or greater than 0.4W (upgrade acceptable)

The ERJ-P06J163V from Panasonic Electronic Components meets all substitution criteria with an upgraded power rating of 0.5W, maintaining full electrical and mechanical compatibility while providing enhanced power handling capability.

Parameter Comparison

Engineering Selection Recommendations

The ERJ-P06J163V is a direct substitute for the ESR10EZPJ163. Both components carry AEC-Q200 automotive certification, ROHS3 compliance, and identical electrical specifications for resistance, tolerance, and temperature coefficient. The substitute part features a higher power rating (0.5W versus 0.4W), which provides additional thermal margin without compromising any electrical or mechanical requirements. Both components maintain the same operating temperature range, package dimensions, and pulse withstanding capability. The maximum seated height difference of 0.002" (0.05mm) is within typical PCB assembly tolerances for 0805 components.

Frequently Asked Questions (FAQ)

Q: Can the ERJ-P06J163V replace the ESR10EZPJ163 in existing designs?

A: Yes. The ERJ-P06J163V is electrically and mechanically compatible with the ESR10EZPJ163. Both components share identical resistance, tolerance, temperature coefficient, and operating temperature range. The substitute part's higher power rating (0.5W) provides additional capability without introducing any compatibility issues.

Q: Are there any height differences that could affect PCB assembly?

A: The seated height difference is 0.002" (0.05mm), with the ERJ-P06J163V at 0.028" maximum versus the ESR10EZPJ163 at 0.026" maximum. This variation is within standard PCB assembly tolerances for 0805 components and does not require design modifications.

Q: Do both parts meet automotive qualification requirements?

A: Yes. Both the ESR10EZPJ163 and ERJ-P06J163V are AEC-Q200 rated for automotive applications and maintain identical operating temperature ranges of -55°C to 155°C.

Q: What is the significance of the power rating upgrade?

A: The ERJ-P06J163V's 0.5W rating versus the ESR10EZPJ163's 0.4W rating provides enhanced thermal performance. This upgrade allows the component to dissipate additional power without exceeding temperature limits, offering improved reliability margin in the application.

Q: Are the RoHS and REACH compliance statuses identical?

A: Yes. Both components are ROHS3 compliant and REACH unaffected, maintaining identical environmental compliance profiles.