ESR10EZPJ114 Equivalent & Substitute Parts

Part Overview

The ESR10EZPJ114 is a 110 kOhms ±5% thick film chip resistor manufactured by Rohm Semiconductor in the 0805 (2012 Metric) package. This component is rated for 0.4W power dissipation and meets automotive AEC-Q200 qualification standards with pulse withstanding capability. The part is currently active in production with 1124 units in stock. Equivalent and substitute parts are identified when design requirements allow for alternative manufacturers or when inventory constraints necessitate component sourcing from alternative suppliers while maintaining electrical and mechanical compatibility.

Substiute Parts

ESR10EZPJ114

Rohm SemiconductorIn Stock: 1203ESR10EZPJ114 Datasheet

Current PartRFQ

ERJ-P06J114V

Panasonic Electronic ComponentsIn Stock: 15825ERJ-P06J114V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ESR10EZPJ114 is determined by the following critical parameters:

• Resistance value: 110 kOhms (exact match required)
• Tolerance: ±5% (exact match required)
• Package: 0805 (2012 Metric) (exact match required)
• Composition: Thick Film (exact match required)
• Temperature Coefficient: ±200ppm/°C (exact match required)
• Operating Temperature Range: -55°C ~ 155°C (exact match or better required)
• Automotive Rating: AEC-Q200 (exact match required)
• RoHS Compliance: ROHS3 Compliant (exact match required)

The ERJ-P06J114V from Panasonic Electronic Components qualifies as a substitute part. While the power rating differs (0.5W versus 0.4W), this represents an upgrade in capability and does not restrict substitution in applications designed for the original 0.4W specification. All other electrical and mechanical parameters remain identical.

Parameter Comparison

Engineering Selection Recommendations

The ERJ-P06J114V qualifies as a direct substitute for the ESR10EZPJ114 based on matching electrical specifications, identical package geometry, and equivalent automotive qualification. Both components are ROHS3 compliant, carry AEC-Q200 ratings, and operate across the same temperature range. The increased power rating of the Panasonic part (0.5W versus 0.4W) provides additional thermal margin in applications and does not introduce compatibility issues. Physical dimensions remain functionally equivalent with maximum seated height difference of 0.002" (0.05mm), which is negligible for standard PCB assembly processes. Selection between these parts may be driven by inventory availability, supply chain considerations, or procurement preferences, as both meet the specified electrical and mechanical requirements.

Frequently Asked Questions (FAQ)

Q: Can the ERJ-P06J114V replace the ESR10EZPJ114 in existing designs?

A: Yes. The ERJ-P06J114V is electrically and mechanically compatible with the ESR10EZPJ114. Resistance, tolerance, package, temperature coefficient, and operating temperature range are identical. The higher power rating (0.5W) represents an upgrade that does not restrict substitution in applications designed for 0.4W operation.

Q: Are there any physical compatibility concerns with the ERJ-P06J114V?

A: No. Both components use the 0805 (2012 Metric) package with identical length and width dimensions (2.00mm x 1.25mm). The maximum seated height difference is 0.002" (0.05mm), which is within standard PCB assembly tolerances and does not affect placement or soldering processes.

Q: Do both parts meet automotive qualification requirements?

A: Yes. Both the ESR10EZPJ114 and ERJ-P06J114V carry AEC-Q200 automotive qualification and are rated for pulse withstanding operation. Both are ROHS3 compliant and carry unlimited moisture sensitivity level (MSL 1).

Q: What is the temperature coefficient difference between these parts?

A: There is no difference. Both components have a temperature coefficient of ±200ppm/°C and operate across the identical temperature range of -55°C to 155°C.

Q: Can I use the ERJ-P06J114V in high-temperature applications?

A: Yes. The ERJ-P06J114V maintains the same maximum operating temperature of 155°C as the ESR10EZPJ114, making it suitable for identical thermal environments.