ESR10EZPJ111 Equivalent & Substitute Parts

Part Overview

The ESR10EZPJ111 is a 110 Ohms ±5% 0.4W thick film chip resistor in 0805 (2012 Metric) package manufactured by Rohm Semiconductor. This component is AEC-Q200 automotive qualified with pulse withstanding capability and operates across -55°C to 155°C. The part is active in production with ROHS3 compliance and unlimited moisture sensitivity rating. Substitute parts are identified when equivalent electrical specifications and mechanical compatibility are maintained within automotive and industrial applications.

Substiute Parts

ESR10EZPJ111

Rohm SemiconductorIn Stock: 5059ESR10EZPJ111 Datasheet

Current PartRFQ

ERJ-P06J111V

Panasonic Electronic ComponentsIn Stock: 10647ERJ-P06J111V Datasheet

UpgradeRFQ

ERJ-UP6J111V

Panasonic Electronic ComponentsIn Stock: 6120ERJ-UP6J111V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ESR10EZPJ111 are qualified based on the following criteria:

• Identical resistance value: 110 Ohms
• Identical tolerance: ±5%
• Identical package: 0805 (2012 Metric)
• Identical composition: Thick Film
• Identical temperature coefficient: ±200ppm/°C
• Identical operating temperature range: -55°C to 155°C
• Identical automotive qualification: AEC-Q200
• Identical RoHS compliance: ROHS3
• Identical moisture sensitivity: MSL 1

The identified substitutes maintain all critical electrical and mechanical parameters. Power rating variations (0.4W to 0.5W) represent an upgrade path where higher power dissipation capability is acceptable in the application circuit. Both substitute parts are manufactured by Panasonic Electronic Components and remain in active production status.

Parameter Comparison

Engineering Selection Recommendations

Both ERJ-P06J111V and ERJ-UP6J111V are direct substitutes for the ESR10EZPJ111 within automotive and industrial applications. Selection between these options depends on application-specific environmental exposure:

ERJ-P06J111V provides equivalent performance with increased power dissipation margin (0.5W versus 0.4W) while maintaining all electrical and mechanical specifications. This part is suitable for standard automotive environments.

ERJ-UP6J111V includes anti-sulfur protection in addition to the standard automotive qualification. This variant is specified for applications exposed to high-sulfur environments or corrosive atmospheric conditions. The anti-sulfur feature does not affect electrical performance or mechanical compatibility.

All three parts maintain active production status, AEC-Q200 automotive qualification, ROHS3 compliance, and unlimited moisture sensitivity rating. Height variation (0.65mm to 0.70mm) is within typical PCB design tolerances for 0805 package components.

Frequently Asked Questions (FAQ)

Q: Can ERJ-P06J111V and ERJ-UP6J111V be used interchangeably with ESR10EZPJ111?

A: Yes. Both parts maintain identical resistance, tolerance, package, temperature coefficient, and operating temperature range. The 0.1W power rating increase (0.4W to 0.5W) represents an upgrade that does not compromise circuit performance. Height difference of 0.05mm (0.70mm versus 0.65mm) is within standard PCB assembly tolerances.

Q: What is the difference between ERJ-P06J111V and ERJ-UP6J111V?

A: Both parts share identical electrical specifications and package dimensions. ERJ-UP6J111V includes anti-sulfur protection for applications in corrosive or high-sulfur environments. Standard automotive applications typically use ERJ-P06J111V.

Q: Are all three parts AEC-Q200 qualified?

A: Yes. ESR10EZPJ111, ERJ-P06J111V, and ERJ-UP6J111V all carry AEC-Q200 automotive qualification and are suitable for automotive applications requiring this certification.

Q: What is the significance of the 0.05mm height difference?

A: The seated height variation (0.65mm for ESR10EZPJ111 versus 0.70mm for Panasonic parts) is within standard 0805 package tolerance and does not affect PCB assembly or component placement in typical automotive and industrial designs.

Q: Are all parts RoHS compliant?

A: Yes. All three parts are ROHS3 compliant with unlimited moisture sensitivity rating (MSL 1), meeting current environmental and regulatory requirements for automotive and industrial applications.