ESR03EZPJ335 Equivalent & Substitute Parts

Part Overview

The ESR03EZPJ335 is a 3.3 MOhms ±5% thick film chip resistor in 0603 (1608 Metric) package manufactured by Rohm Semiconductor. This component is rated for automotive applications under AEC-Q200 standard with pulse withstanding capability and operates across -55°C to 155°C. The part is currently active in production with 4272 units in stock. Equivalent and substitute parts are identified when design requirements necessitate improved tolerance specifications, enhanced temperature stability, or alternative sourcing while maintaining electrical and mechanical compatibility.

Substiute Parts

ESR03EZPJ335

Rohm SemiconductorIn Stock: 4324ESR03EZPJ335 Datasheet

Current PartRFQ

ESR03EZPF3304

Rohm SemiconductorIn Stock: 5923ESR03EZPF3304 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the ESR03EZPJ335 is determined by strict equivalence in the following parameters:

• Resistance value: 3.3 MOhms (exact match required)
• Package type: 0603 (1608 Metric) (exact match required)
• Power rating: 0.25W minimum (equal or higher acceptable)
• Composition: Thick Film (exact match required)
• Automotive rating: AEC-Q200 (exact match required)
• Operating temperature range: -55°C to 155°C minimum (equal or wider acceptable)
• RoHS compliance: ROHS3 Compliant (exact match required)

Tolerance and temperature coefficient may vary within acceptable design margins. The ESR03EZPF3304 qualifies as a direct substitute by meeting all mandatory equivalence criteria while offering improved tolerance specification.

Parameter Comparison

Engineering Selection Recommendations

The ESR03EZPF3304 is a direct substitute for the ESR03EZPJ335 in applications where component specifications are compatible. Both parts maintain identical mechanical footprints, power ratings, and automotive AEC-Q200 compliance. The ESR03EZPF3304 provides improved tolerance specification (±1% versus ±5%) and superior temperature coefficient stability (±100ppm/°C versus ±200ppm/°C), making it suitable for designs requiring tighter resistance accuracy. Both parts are ROHS3 compliant with unlimited moisture sensitivity rating and identical operating temperature ranges. Selection between these parts depends on circuit tolerance requirements and design specifications rather than functional limitations.

Frequently Asked Questions (FAQ)

Q: Can ESR03EZPF3304 be used as a direct replacement for ESR03EZPJ335?

A: Yes. Both parts share identical resistance value, package type, power rating, composition, automotive rating, and operating temperature range. The substitute offers improved tolerance and temperature coefficient specifications.

Q: Are the physical dimensions identical?

A: Yes. Both parts use the 0603 (1608 Metric) package with identical length (0.063" / 1.60mm), width (0.031" / 0.80mm), and maximum seated height (0.022" / 0.55mm).

Q: Do both parts meet automotive standards?

A: Yes. Both ESR03EZPJ335 and ESR03EZPF3304 are rated to AEC-Q200 automotive standard with pulse withstanding capability.

Q: What is the difference in tolerance between these parts?

A: ESR03EZPJ335 has ±5% tolerance while ESR03EZPF3304 has ±1% tolerance. The substitute provides tighter resistance accuracy.

Q: Are both parts RoHS compliant?

A: Yes. Both parts are ROHS3 compliant with unlimited moisture sensitivity level (MSL 1).

Q: Can these parts be used interchangeably in PCB assembly?

A: Yes. Identical package specifications and termination count allow direct PCB layout compatibility without design modification.