ESR01MZPJ474 Equivalent & Substitute Parts

Part Overview

The ESR01MZPJ474 is a 470 kOhms ±5% thick film chip resistor manufactured by Rohm Semiconductor in 0402 (1005 Metric) package format. This component is rated for 0.2W (1/5W) power dissipation and meets AEC-Q200 automotive qualification standards with pulse withstanding capability. The part is currently in active production status with 6226 units available in inventory. Equivalent and substitute parts are identified when designs require alternative sourcing, inventory replenishment, or component availability management while maintaining identical electrical and mechanical specifications.

Substiute Parts

ESR01MZPJ474

Rohm SemiconductorIn Stock: 6276ESR01MZPJ474 Datasheet

Current PartRFQ

CRCW0402470KJNEDHP

Vishay DaleIn Stock: 20243CRCW0402470KJNEDHP Datasheet

DirectRFQ

ERJ-PA2J474X

Panasonic Electronic ComponentsIn Stock: 6411ERJ-PA2J474X Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ESR01MZPJ474 are qualified based on the following critical parameters that must remain constant:

• Resistance value: 470 kOhms
• Tolerance: ±5%
• Package format: 0402 (1005 Metric)
• Composition: Thick Film
• Temperature coefficient: ±200ppm/°C
• Operating temperature range: -55°C ~ 155°C
• Automotive qualification: AEC-Q200
• RoHS compliance: ROHS3 Compliant
• Moisture sensitivity: MSL 1

The identified substitute parts maintain these core parameters. Variations in power rating (0.2W vs. 0.25W) are acceptable within the same package footprint when the application does not require the exact original power specification.

Parameter Comparison

Engineering Selection Recommendations

All three parts—ESR01MZPJ474 (Rohm Semiconductor), CRCW0402470KJNEDHP (Vishay Dale), and ERJ-PA2J474X (Panasonic Electronic Components)—are active production components with full AEC-Q200 automotive qualification and ROHS3 compliance. Selection between these parts is determined by availability, supply chain requirements, and design specifications.

CRCW0402470KJNEDHP and ESR01MZPJ474 share identical power ratings (0.2W). ERJ-PA2J474X provides a higher power rating (0.25W) within the same 0402 package footprint, offering additional thermal margin in applications where power dissipation is a consideration.

All parts maintain identical resistance, tolerance, temperature coefficient, and operating temperature range specifications, ensuring direct functional equivalence in circuit applications.

Frequently Asked Questions (FAQ)

Q: Can ERJ-PA2J474X replace ESR01MZPJ474 if the power rating differs?

A: Yes. The ERJ-PA2J474X has a 0.25W (1/4W) rating compared to the ESR01MZPJ474's 0.2W (1/5W) rating. Both parts fit the same 0402 package footprint. The higher power rating of the Panasonic part provides additional thermal capability and is functionally compatible in applications designed for the original 0.2W specification.

Q: Are all three parts suitable for automotive applications?

A: Yes. All three parts carry AEC-Q200 automotive qualification, pulse withstanding capability, and operate across the -55°C ~ 155°C temperature range required for automotive environments.

Q: What is the significance of the 0402 package format?

A: The 0402 (1005 Metric) package is a surface-mount resistor measuring 1.00mm length × 0.50mm width with a maximum seated height of 0.40mm. All three substitute parts use this identical package format, ensuring PCB footprint compatibility and no layout modifications are required.

Q: Do all parts meet the same compliance standards?

A: Yes. All three parts are ROHS3 compliant, REACH unaffected, and carry MSL 1 (Unlimited) moisture sensitivity rating. They share identical ECCN (EAR99) and HTSUS (8533.21.0030) classifications.

Q: What determines substitution eligibility for this resistor value?

A: Substitution is based on matching resistance (470 kOhms), tolerance (±5%), package format (0402), composition (thick film), temperature coefficient (±200ppm/°C), operating temperature range (-55°C ~ 155°C), and automotive qualification (AEC-Q200). Power rating variations within the same package are acceptable when application requirements permit.