ESLM13100 Equivalent & Substitute Parts

Part Overview

The ESLM13100 is a 13-position wire-to-board terminal block manufactured by Amphenol PCD, designed for horizontal PCB mounting with side entry configuration. This component is classified as Active product status and is RoHS compliant. Substitute parts are identified when equivalent electrical performance and mechanical compatibility can be maintained across different position counts and manufacturer specifications, allowing for design flexibility and supply chain alternatives.

Substiute Parts

ESLM13100

Amphenol PCDIn Stock: 1020ESLM13100 Datasheet

Current PartRFQ

1-282836-3

TE Connectivity AMP ConnectorsIn Stock: 25001-282836-3 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ESLM13100 are identified based on the following critical parameters that determine functional equivalence:

Electrical compatibility is established through matching current rating (14.6 A), voltage rating (300 V), and wire termination method (Screw - Rising Cage Clamp). Mechanical compatibility is confirmed through identical pitch spacing (0.197" / 5.00mm), mating orientation (Horizontal with Board), and mounting type (Through Hole). Material and environmental specifications including housing material (Polyamide PA66), RoHS compliance status, and operating temperature range support interchangeability within the same application context.

The substitute part 1-282836-3 maintains electrical and mechanical compatibility through these core parameters, though position count differs (2 positions versus 13 positions), making it suitable for applications requiring fewer connection points within the same terminal block family.

Parameter Comparison

Engineering Selection Recommendations

Both the ESLM13100 and 1-282836-3 maintain Active product status with RoHS compliance certification, supporting long-term availability and regulatory compliance in applications requiring terminal block solutions. Selection between these components should be based on position count requirements: the ESLM13100 accommodates 13-position configurations, while the 1-282836-3 is specified for 2-position applications. Electrical and mechanical parameters remain equivalent across both components, with wire gauge support differing minimally (14-30 AWG versus 16-30 AWG). Screw torque specifications differ between components (0.5 Nm versus 0.68 Nm), reflecting design variations between manufacturers.

Frequently Asked Questions (FAQ)

Q: Can the 1-282836-3 directly replace the ESLM13100 in existing designs?

A: Direct replacement depends on position count requirements. The 1-282836-3 provides only 2 positions compared to the ESLM13100's 13 positions. Both components share identical pitch (5.00mm), mating orientation, current/voltage ratings, and wire termination method, making them electrically and mechanically compatible within their respective position configurations.

Q: What are the critical parameters for terminal block substitution?

A: Pitch spacing, mating orientation, current rating, voltage rating, wire termination method, and mounting type are the primary parameters determining substitution eligibility. Both components maintain 0.197" (5.00mm) pitch, horizontal board orientation, 14.6 A current capacity, 300 V voltage rating, screw-based termination, and through-hole mounting.

Q: Are there wire gauge compatibility differences?

A: The ESLM13100 supports 14-30 AWG wire gauge, while the 1-282836-3 supports 16-30 AWG. Applications requiring 14 or 15 AWG wire must use the ESLM13100. Both components accommodate 16-30 AWG wire sizes.

Q: How do packaging differences affect component selection?

A: The ESLM13100 is supplied in Tray packaging with 916 pieces in stock, while the 1-282836-3 is supplied in Bulk packaging with 2466 pieces available. Packaging format does not affect electrical or mechanical compatibility but may influence procurement and handling procedures.

Q: What is the significance of different screw torque specifications?

A: The ESLM13100 specifies 0.5 Nm (4.4 Lb-In) screw torque, while the 1-282836-3 specifies 0.68 Nm (6 Lb-In). These values reflect manufacturer-specific design parameters and should be observed during assembly to ensure proper wire termination without over-tightening or under-tightening connections.