ESLM10100 Equivalent & Substitute Parts

Part Overview

The ESLM10100 is a 10-position wire-to-board terminal block manufactured by Amphenol PCD, designed for horizontal PCB mounting with side entry wire connections. This component is classified as Active product status and is widely used in industrial control, power distribution, and signal routing applications requiring reliable screw-clamp termination. Substitute parts are identified when equivalent electrical performance, mechanical compatibility, and environmental ratings can be maintained across different manufacturers while preserving circuit functionality and installation requirements.

Substiute Parts

ESLM10100

Amphenol PCDIn Stock: 1074ESLM10100 Datasheet

Current PartRFQ

1-282836-0

TE Connectivity AMP ConnectorsIn Stock: 53591-282836-0 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ESLM10100 is determined by strict equivalence across the following critical parameters:

• 10 positions per level configuration
• 0.197" (5.00mm) pitch spacing
• Horizontal with board mating orientation
• 14.6 A current rating minimum
• 300 V voltage rating minimum
• Through hole mounting compatibility
• Screw-clamp wire termination method
• Side entry interlocking feature
• Polyamide (PA66) housing material
• RoHS compliance status

The substitute part 1-282836-0 (TE Connectivity AMP Connectors, Buchanan series) meets all critical electrical and mechanical parameters. Variations in wire gauge acceptance range, contact material composition, torque specification, and screw thread designation do not preclude substitution when the primary functional requirements are satisfied.

Parameter Comparison

Engineering Selection Recommendations

Both the ESLM10100 and 1-282836-0 maintain Active product status and satisfy RoHS compliance requirements. The ESLM10100 is RoHS Compliant, while the 1-282836-0 is ROHS3 Compliant, indicating both meet current environmental standards. Selection between these parts should be based on:

• Availability and lead time requirements (ESLM10100: 988 pcs in stock; 1-282836-0: 5264 pcs in stock)
• Wire gauge requirements within the overlapping 16-30 AWG range
• Packaging format preference (Tray versus Bulk)
• Color coding requirements for circuit board assembly or identification purposes
• Torque specification compatibility with assembly equipment (ESLM10100: 0.5 Nm; 1-282836-0: 0.68 Nm)

Frequently Asked Questions (FAQ)

Q: Can 1-282836-0 replace ESLM10100 in existing designs?

A: Yes, when wire gauge requirements fall within the 16-30 AWG overlapping range. If the design specifies 14-15 AWG wire, the ESLM10100 must be retained.

Q: Are the pitch and position configurations identical?

A: Yes. Both parts feature 10 positions at 0.197" (5.00mm) pitch with horizontal board mounting, ensuring PCB footprint compatibility.

Q: What is the difference in packaging between these parts?

A: ESLM10100 is supplied in Tray packaging, while 1-282836-0 is supplied in Bulk packaging. This affects handling, storage, and assembly line integration but does not impact electrical or mechanical performance.

Q: Do the different colors affect functionality?

A: No. Color differences (Black versus Green) are cosmetic and do not affect electrical performance, current rating, voltage rating, or temperature operation.

Q: Are the screw torque specifications compatible?

A: The torque specifications differ (0.5 Nm for ESLM10100 versus 0.68 Nm for 1-282836-0). Assembly equipment must be configured accordingly to prevent under-tightening or over-tightening of wire connections.

Q: Are both parts RoHS compliant?

A: Yes. ESLM10100 is RoHS Compliant, and 1-282836-0 is ROHS3 Compliant. Both meet current environmental regulations.