ESLM09200 Equivalent & Substitute Parts

Part Overview

The ESLM09200 is a 9-position wire-to-board terminal block manufactured by Amphenol PCD, designed for horizontal PCB mounting with side entry wire connections. This component operates at 300V with a 14.6A current rating and accommodates wire gauges from 14-30 AWG using screw-based rising cage clamp termination. The part is currently active in production with RoHS compliance and unlimited moisture sensitivity rating. Substitute parts are identified when equivalent electrical performance, mechanical compatibility, and functional characteristics align within acceptable parameter tolerances for the application.

Substiute Parts

ESLM09200

Amphenol PCDIn Stock: 1121ESLM09200 Datasheet

Current PartRFQ

282837-9

TE Connectivity AMP ConnectorsIn Stock: 1265282837-9 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The ESLM09200 accepts TE Connectivity AMP Connectors part number 282837-9 as a functional substitute based on the following alignment criteria:

Matching Parameters:

• 9-position configuration
• 0.200" (5.08mm) pitch spacing
• Horizontal with board mating orientation
• Through hole mounting
• Screw-based rising cage clamp termination
• Side entry interlocking feature
• Polyamide (PA66) housing material
• 300V voltage rating
• 14.6A current rating

Acceptable Variations:

• Wire gauge range differs (282837-9 supports 16-28 AWG versus ESLM09200 14-30 AWG)
• Contact material composition varies (brass versus copper alloy base)
• Torque specification differs (0.68 Nm versus 0.5 Nm)
• Housing color differs (green versus black)
• RoHS compliance status differs

These variations remain within acceptable substitution parameters for equivalent terminal block functionality in applications where the specified wire gauge range and compliance requirements align with design constraints.

Parameter Comparison

Engineering Selection Recommendations

ESLM09200 Selection Criteria:

• Applications requiring RoHS compliance
• Designs utilizing wire gauges 14-16 AWG (below 282837-9 minimum)
• Systems with documented operating temperature specifications below -40°C or above 110°C requirements
• Designs specifying lower screw torque values (0.5 Nm)

282837-9 Selection Criteria:

• Applications where RoHS compliance is not required
• Designs utilizing wire gauges 16-28 AWG
• Systems where higher screw torque (0.68 Nm) is acceptable or beneficial
• Applications where TE Connectivity supply chain or packaging (bulk) is preferred

Both parts maintain active production status and share identical electrical ratings, pitch spacing, and mechanical mounting interfaces. Selection between these substitutes depends on compliance requirements, wire gauge specifications, and supply chain considerations.

Frequently Asked Questions (FAQ)

Q: Can 282837-9 directly replace ESLM09200 in all applications?

A: Direct replacement is possible when the application wire gauge falls within the 16-28 AWG range supported by 282837-9 and RoHS compliance is not a design requirement. Applications requiring 14 AWG or 30 AWG wire support must use ESLM09200.

Q: What is the impact of different screw torque specifications?

A: ESLM09200 specifies 0.5 Nm torque while 282837-9 specifies 0.68 Nm. Both values are within acceptable ranges for screw-based cage clamp termination. Installation procedures must follow the specific torque value for each part to ensure proper contact pressure and electrical performance.

Q: Are the physical dimensions identical between these parts?

A: Both parts share identical pitch spacing (0.200"/5.08mm), 9-position configuration, and through-hole mounting footprint. Housing color differs (black versus green) but does not affect electrical or mechanical compatibility.

Q: What are the packaging differences?

A: ESLM09200 is supplied in tray packaging with 1088 pieces in stock. 282837-9 is supplied in bulk packaging with 1221 pieces in stock. Packaging format may affect procurement, handling, and storage procedures.

Q: Does operating temperature specification affect substitution?

A: ESLM09200 specifies -40°C to 110°C operating range. 282837-9 does not provide operating temperature specification in available documentation. Applications with defined temperature requirements outside standard ranges should verify 282837-9 suitability through the manufacturer.