ESLM07200 Equivalent & Substitute Parts

Part Overview

The ESLM07200 is a 7-position wire-to-board terminal block manufactured by Amphenol PCD, designed for horizontal PCB mounting with side entry wire connections. This component operates at 300V with a 14.6A current rating and accommodates wire gauges from 14-30 AWG using screw-based rising cage clamp termination. The part is currently active in production with RoHS compliance and unlimited moisture sensitivity rating, making it suitable for industrial control, power distribution, and signal routing applications where reliable wire-to-board connections are required.

Substiute Parts

ESLM07200

Amphenol PCDIn Stock: 812ESLM07200 Datasheet

Current PartRFQ

282837-7

TE Connectivity AMP ConnectorsIn Stock: 1939282837-7 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The ESLM07200 can be substituted with TE Connectivity AMP Connectors part number 282837-7 based on the following critical parameters that determine functional equivalence:

Matching Parameters:

• 7 positions per level
• 0.200" (5.08mm) pitch spacing
• Horizontal with board mating orientation
• 14.6A current rating
• 300V voltage rating
• Through hole mounting
• Screw-based rising cage clamp termination
• Side entry interlocking feature
• Polyamide (PA66) housing material
• Unlimited moisture sensitivity level (MSL 1)

Allowable Variations:

• Wire gauge range differs (282837-7 supports 16-28 AWG versus ESLM07200's 14-30 AWG)
• Contact material composition varies (brass versus copper alloy)
• Screw torque specification differs (0.68 Nm versus 0.5 Nm)
• Housing color differs (green versus black)
• Operating temperature range not specified for 282837-7

Parameter Comparison

Engineering Selection Recommendations

Both the ESLM07200 and 282837-7 maintain active product status with current manufacturing support. The ESLM07200 carries standard RoHS compliance, while the 282837-7 meets the more stringent ROHS3 standard and is REACH affected, making it suitable for applications requiring enhanced environmental compliance documentation.

The primary selection criterion depends on wire gauge requirements. The ESLM07200 accommodates the full 14-30 AWG range, providing flexibility for smaller gauge conductors. The 282837-7 supports 16-28 AWG, which covers most industrial applications but excludes 14 AWG and 30 AWG extremes.

Screw torque specifications differ between parts (0.5 Nm versus 0.68 Nm), requiring verification that assembly equipment and procedures are compatible with the selected component. Both parts share identical electrical ratings, mounting methodology, and housing material composition, ensuring functional interchangeability within their respective wire gauge limitations.

Frequently Asked Questions (FAQ)

Q: Can 282837-7 directly replace ESLM07200 in existing designs?

A: Direct replacement is possible if the design uses wire gauges within the 16-28 AWG range. If the application requires 14 AWG or 30 AWG conductors, the ESLM07200 must be retained.

Q: What is the significance of the different screw torque specifications?

A: The ESLM07200 requires 0.5 Nm (4.4 Lb-In) torque, while 282837-7 requires 0.68 Nm (6 Lb-In). Assembly procedures and torque-controlled equipment must be adjusted accordingly to prevent under-tightening or over-tightening, which could compromise connection reliability.

Q: Are the contact materials interchangeable from a performance standpoint?

A: Both parts use tin-plated contacts with different base materials (copper alloy versus brass). Both materials provide adequate conductivity and corrosion resistance for the specified voltage and current ratings. Material selection should be verified against specific application environmental conditions.

Q: What packaging differences exist between these parts?

A: ESLM07200 is supplied in tray packaging, while 282837-7 is supplied in bulk packaging. This affects inventory management and handling procedures but does not impact electrical or mechanical performance.

Q: Do both parts meet the same compliance standards?

A: ESLM07200 is RoHS compliant. 282837-7 meets ROHS3 compliance and is REACH affected. Applications requiring REACH documentation or enhanced environmental compliance should specify 282837-7.