ESLM07100 Equivalent & Substitute Parts Reference

Part Overview

The ESLM07100 is a 7-position wire-to-board terminal block manufactured by Amphenol PCD, designed for horizontal PCB mounting with 5mm pitch spacing. This component is classified as Active product status and serves as a standard interconnection solution for applications requiring side-entry wire termination with screw-based cage clamp technology. Alternative equivalent parts may be required due to supply chain considerations, packaging preferences, or specific compliance requirements in different regions.

Substiute Parts

ESLM07100

Amphenol PCDIn Stock: 968ESLM07100 Datasheet

Current PartRFQ

1729063

Phoenix ContactIn Stock: 9431729063 Datasheet

SimilarRFQ

282836-7

TE Connectivity AMP ConnectorsIn Stock: 8362282836-7 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ESLM07100 are qualified based on the following critical parameters that determine functional equivalence:

• 7-position configuration with single level
• 5mm (0.197") pitch spacing
• Horizontal with board mating orientation
• Through-hole PCB mounting
• Screw-based rising cage clamp termination
• 300 V voltage rating
• Side-entry interlocking feature
• Wire gauge compatibility (14-30 AWG minimum requirement)

The identified substitute parts (1729063 and 282836-7) maintain these core electrical and mechanical characteristics, enabling direct functional replacement in applications where the ESLM07100 is specified.

Parameter Comparison

Engineering Selection Recommendations

All three parts maintain Active product status and satisfy core functional requirements for 7-position, 5mm pitch terminal block applications. Selection between ESLM07100, 1729063, and 282836-7 should be based on the following considerations:

ESLM07100 (Amphenol PCD): Provides 14.6 A current capacity with RoHS compliance. Suitable for applications requiring the full specified current rating and standard RoHS certification.

1729063 (Phoenix Contact): Rated for 10 A current capacity with ROHS3 compliance and REACH affected status. Appropriate for applications with lower current requirements and where REACH compliance documentation is necessary.

282836-7 (TE Connectivity): Matches the 14.6 A current rating of the ESLM07100 with ROHS3 compliance. Wire gauge specification begins at 16 AWG (compared to 14 AWG for ESLM07100). Suitable for applications where TE Connectivity supply chain integration is preferred and wire gauge limitation is acceptable.

Frequently Asked Questions (FAQ)

Q: Can 1729063 be used as a direct replacement for ESLM07100?

A: The 1729063 maintains identical pitch, position count, mounting orientation, and termination method. However, the current rating is 10 A versus 14.6 A for the ESLM07100. Substitution is valid only if the application current requirement does not exceed 10 A.

Q: What is the primary difference between 282836-7 and ESLM07100?

A: Both parts share identical current rating (14.6 A), voltage rating (300 V), and pitch (5mm). The 282836-7 specifies a minimum wire gauge of 16 AWG, whereas ESLM07100 accommodates 14 AWG. If 14 AWG wire termination is required, ESLM07100 is the appropriate selection.

Q: Are all three parts RoHS compliant?

A: Yes. ESLM07100 carries RoHS compliance certification. Both 1729063 and 282836-7 carry ROHS3 compliance certification. All three parts meet RoHS requirements for their respective compliance standards.

Q: Does packaging format affect electrical performance?

A: No. ESLM07100 is supplied in Tray packaging, while 1729063 and 282836-7 are supplied in Bulk packaging. Packaging format does not affect electrical or mechanical performance; it reflects supply chain and handling preferences only.

Q: What torque specification should be used when installing these terminal blocks?

A: ESLM07100 specifies 0.5 Nm screw torque. The 1729063 specifies 0.5-0.6 Nm, and 282836-7 specifies 0.68 Nm. Installation torque must follow the specific part manufacturer's recommendation to ensure proper contact pressure and reliability.