ESLM06100 Equivalent & Substitute Parts

Part Overview

The ESLM06100 is a 6-position wire-to-board terminal block manufactured by Amphenol PCD, designed for horizontal PCB mounting with side entry wire connections. This component is classified as Active product status and is RoHS Compliant. Equivalent and substitute parts are identified when component availability is limited, supply chain disruptions occur, or design flexibility permits functional alternatives that meet the same electrical and mechanical specifications.

Substiute Parts

ESLM06100

Amphenol PCDIn Stock: 1152ESLM06100 Datasheet

Current PartRFQ

282836-6

TE Connectivity AMP ConnectorsIn Stock: 2253282836-6 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The substitute part 282836-6 (TE Connectivity AMP Connectors) qualifies as a functional equivalent based on the following critical parameters:

• Positions and Pitch: Both parts feature 6 positions at 0.197" (5.00mm) pitch, ensuring PCB layout compatibility
• Electrical Ratings: Both support 14.6 A current and 300 V voltage specifications
• Mounting Configuration: Both are through-hole mounted with horizontal board orientation and side entry wire connections
• Termination Method: Both utilize screw-based rising cage clamp wire termination
• Housing Material: Both employ Polyamide (PA66) Nylon 6/6 construction
• Interlocking Feature: Both incorporate side interlocking design

Substitution is valid when these core parameters align. Differences in wire gauge range, operating temperature specification, torque values, and color do not prevent functional substitution in applications where the substitute part's specifications meet or exceed the design requirements.

Parameter Comparison

Engineering Selection Recommendations

Both the ESLM06100 and 282836-6 are Active product status components with established compliance certifications. The ESLM06100 carries RoHS Compliant status, while the 282836-6 meets ROHS3 Compliant requirements. Both components satisfy EAR99 export classification and share identical HTSUS commodity codes, indicating regulatory alignment for procurement and supply chain purposes.

Selection between these parts should be based on availability, lead time, packaging format (Tray versus Bulk), and design-specific wire gauge requirements. The ESLM06100 accommodates 14-30 AWG wire, while the 282836-6 supports 16-30 AWG wire. Applications requiring 14 or 15 AWG wire termination must use the ESLM06100. For applications within the 16-30 AWG range, either part is functionally equivalent.

Frequently Asked Questions (FAQ)

Q: Can 282836-6 replace ESLM06100 in all applications?

A: Substitution is valid when wire gauge requirements fall within the 16-30 AWG range supported by both parts. Applications requiring 14 or 15 AWG wire termination must use ESLM06100.

Q: Are the electrical ratings identical?

A: Yes. Both parts are rated for 14.6 A current and 300 V voltage, ensuring equivalent electrical performance in circuit applications.

Q: What is the difference in packaging?

A: ESLM06100 is supplied in Tray packaging, while 282836-6 is supplied in Bulk packaging. Packaging format does not affect functional performance but may influence procurement quantities and handling procedures.

Q: Are both parts RoHS compliant?

A: Yes. ESLM06100 is RoHS Compliant, and 282836-6 is ROHS3 Compliant. Both meet environmental compliance requirements for restricted substance use.

Q: Do the parts have the same mounting footprint?

A: Yes. Both parts feature identical 6-position configuration at 0.197" (5.00mm) pitch with through-hole mounting, ensuring PCB layout compatibility.

Q: What is the difference in contact material?

A: ESLM06100 uses Copper Alloy - Tin Plated contacts, while 282836-6 uses Brass - Tin Plated contacts. Both materials provide equivalent electrical conductivity and corrosion resistance for this application class.

Q: Can these parts be used interchangeably on the same PCB?

A: Yes, provided wire gauge requirements are met. The identical pitch, position count, and mounting configuration ensure mechanical and electrical interchangeability.