ESDM09100 Equivalent & Substitute Parts

Part Overview

The ESDM09100 is a 9-position wire-to-board terminal block manufactured by Amphenol PCD, designed for horizontal PCB mounting with 0.100" (2.54mm) pitch spacing. This component provides screw-based wire termination with rising cage clamp technology for secure electrical connections in industrial and commercial applications. The part is currently active in production with 985 units in stock. Substitute parts are identified when equivalent electrical performance, mechanical compatibility, and environmental ratings can be maintained across different manufacturers while preserving core functionality in the target application.

Key Parameters

Parameter	Value
Positions	9
Pitch	0.100" (2.54mm)
Mating Orientation	Horizontal with Board
Current Rating	10 A
Voltage Rating	150 V
Wire Gauge	16-30 AWG
Mounting Type	Through Hole
Wire Termination	Screw - Rising Cage Clamp
Operating Temperature Range	-40°C to 110°C
Housing Material	Polyamide (PA66), Nylon 6/6
RoHS Status	RoHS Compliant

Substitute Part Grouping Explanation

Substitution eligibility for the ESDM09100 is determined by strict equivalence across the following critical parameters:

9-position configuration with 0.100" (2.54mm) pitch spacing
Horizontal with board mating orientation
10 A current rating and 150 V voltage rating
16-30 AWG wire gauge compatibility
Through-hole PCB mounting
Screw-based rising cage clamp termination method
Polyamide (PA66) housing material
RoHS compliance status
Operating temperature range of -40°C minimum and 110°C maximum

The substitute part 282834-9 (TE Connectivity AMP Connectors, Buchanan series) meets all core electrical and mechanical requirements. Minor variations in contact material composition, screw material specification, and torque values do not affect functional interchangeability in standard applications where the specified electrical and environmental parameters are maintained.

Parameter Comparison

Parameter	ESDM09100 (Amphenol PCD)	282834-9 (TE Connectivity)	Compatibility
Positions	9	9	Equivalent
Pitch	0.100" (2.54mm)	0.100" (2.54mm)	Equivalent
Mating Orientation	Horizontal with Board	Horizontal with Board	Equivalent
Current Rating	10 A	10 A	Equivalent
Voltage Rating	150 V	150 V	Equivalent
Wire Gauge	16-30 AWG	16-30 AWG	Equivalent
Mounting Type	Through Hole	Through Hole	Equivalent
Wire Termination	Screw - Rising Cage Clamp	Screw - Rising Cage Clamp	Equivalent
Operating Temperature Range	-40°C to 110°C	-40°C to 105°C	Compatible (282834-9 minimum range met)
Housing Material	Polyamide (PA66), Nylon 6/6	Polyamide (PA66), Nylon 6/6	Equivalent
RoHS Status	RoHS Compliant	RoHS Compliant	Equivalent
Packaging	Tray	Bulk	Different (functional equivalence maintained)
Color	Black	Green	Different (no functional impact)

Engineering Selection Recommendations

Both the ESDM09100 and 282834-9 are active production parts with RoHS compliance certification. Selection between these components should be based on:

Availability and lead time requirements (ESDM09100: 985 units in stock; 282834-9: 1615 units in stock)
Packaging format preference (ESDM09100 supplied in trays; 282834-9 supplied in bulk)
Compliance requirements specific to the application (both meet RoHS; 282834-9 additionally carries REACH Affected status)
Operating temperature ceiling requirements (ESDM09100 rated to 110°C; 282834-9 rated to 105°C)

Both parts satisfy the core electrical specifications of 10 A current, 150 V voltage, and 16-30 AWG wire gauge compatibility. The screw torque specification difference (ESDM09100: 0.13 Nm; 282834-9: 0.2 Nm) reflects manufacturer design variation and does not affect interchangeability in standard applications.

Frequently Asked Questions (FAQ)

Q: Can 282834-9 be used as a direct replacement for ESDM09100 in existing designs?

A: Yes. Both parts share identical electrical ratings (10 A, 150 V), mechanical configuration (9 positions, 0.100" pitch, horizontal orientation), wire gauge compatibility (16-30 AWG), and mounting method (through-hole with screw termination). The 5°C difference in maximum operating temperature (ESDM09100: 110°C vs. 282834-9: 105°C) is not a limiting factor for applications operating within the 282834-9 specification.

Q: What is the impact of different housing colors (black vs. green)?

A: Housing color is a cosmetic attribute with no functional impact on electrical performance, mechanical compatibility, or environmental ratings. Color selection may be driven by application aesthetics or internal documentation standards but does not affect interchangeability.

Q: Does the packaging difference (tray vs. bulk) affect component performance?

A: No. Packaging format affects handling, storage, and logistics but does not alter the electrical or mechanical properties of the terminal block itself. Both packaging types maintain the same moisture sensitivity level (MSL 1, Unlimited).

Q: Are there any compliance differences between these parts?

A: Both parts are RoHS compliant. The 282834-9 carries additional REACH Affected status. Applications subject to REACH regulations should confirm that the 282834-9 designation meets specific regional compliance requirements.

Q: What does the screw torque specification difference mean for installation?

A: The ESDM09100 specifies 0.13 Nm (1.15 Lb-In) torque, while 282834-9 specifies 0.2 Nm (1.7 Lb-In). These values reflect manufacturer design specifications for optimal clamp force. Follow the torque specification of the part being installed to ensure proper wire retention and electrical contact.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message