ESD7004AMUTAG Equivalent & Substitute Parts

Part Overview

The ESD7004AMUTAG is a Transient Voltage Suppressor (TVS) diode designed for surface mount applications in the 10-UDFN (2.5x1) package. This component is classified as Obsolete, which necessitates identification of equivalent and substitute parts for ongoing design requirements and procurement needs. The part provides 5V working voltage with 10V clamping characteristics for transient voltage protection in electronic circuits.

Substiute Parts

ESD7004AMUTAG

onsemiIn Stock: 102325ESD7004AMUTAG Datasheet

Current PartRFQ

ESD7004MUTAG

onsemiIn Stock: 35427ESD7004MUTAG Datasheet

DirectRFQ

PUSB3F96X

Nexperia USA Inc.In Stock: 105230PUSB3F96X Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the ESD7004AMUTAG is determined by the following critical parameters:

Primary Substitution Criteria:

• Voltage - Reverse Standoff (Typ): 5V nominal
• Voltage - Clamping (Max) @ Ipp: 10V maximum
• Current - Peak Pulse (10/1000µs): 1A (8/20µs)
• Package / Case: 10-UFDFN or equivalent 10-pin DFN footprint
• Mounting Type: Surface Mount
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

Identified Substitutes:

1. ESD7004MUTAG (onsemi) — Direct manufacturer equivalent with identical electrical specifications and package footprint. Active product status provides long-term availability.

2. PUSB3F96X (Nexperia USA Inc.) — Similar TVS diode with compatible voltage ratings and surface mount DFN package. Offers higher peak pulse current (5.2A) and power line protection capability, suitable for applications requiring enhanced transient suppression.

Parameter Comparison

Engineering Selection Recommendations

ESD7004MUTAG is the primary recommended substitute. It is manufactured by onsemi, the original manufacturer of the ESD7004AMUTAG, and maintains identical electrical specifications and package dimensions. The part holds Active product status, ensuring continued availability and supply chain stability. ROHS3 compliance and MSL 1 rating match the original specification.

PUSB3F96X serves as an alternative substitute for applications where enhanced transient suppression capability is beneficial. This Nexperia part provides higher peak pulse current (5.2A versus 1A) and lower clamping voltage (4.6V typical), with power line protection functionality. The package footprint (DFN2510A-10) is mechanically compatible with 10-pin DFN layouts. ROHS3 compliance and MSL 1 rating are maintained. Operating temperature range is -40°C to 85°C, which is narrower than the onsemi part.

Both substitutes are ROHS3 compliant and REACH unaffected, meeting regulatory requirements equivalent to the original part.

Frequently Asked Questions (FAQ)

Q: Can ESD7004MUTAG be used as a direct replacement for ESD7004AMUTAG?

A: Yes. ESD7004MUTAG is manufactured by onsemi with identical voltage ratings (5V reverse standoff, 10V clamping), the same 10-UDFN (2.5x1) package footprint, and equivalent electrical performance. The primary difference is product status: ESD7004MUTAG is Active, ensuring long-term availability.

Q: What are the key differences between ESD7004MUTAG and PUSB3F96X?

A: ESD7004MUTAG is a Zener-type TVS with 1A peak pulse current and 10V clamping voltage. PUSB3F96X is a Steering-type TVS with 5.2A peak pulse current and 4.6V clamping voltage. PUSB3F96X includes power line protection capability. Both maintain compatible 10-pin DFN packages and ROHS3 compliance. Operating temperature ranges differ: ESD7004MUTAG operates -55°C to 125°C; PUSB3F96X operates -40°C to 85°C.

Q: Are the package footprints of these parts interchangeable?

A: ESD7004AMUTAG and ESD7004MUTAG use identical 10-UDFN (2.5x1) packages and are footprint-compatible. PUSB3F96X uses DFN2510A-10 package, which is mechanically compatible with 10-pin DFN layouts but may have minor dimensional variations. PCB layout verification is necessary when switching between manufacturers.

Q: Do all three parts meet the same regulatory requirements?

A: Yes. All three parts are ROHS3 compliant, REACH unaffected, and carry MSL 1 (Unlimited) moisture sensitivity ratings. Regulatory compliance is equivalent across all options.

Q: Which substitute should be selected for new designs?

A: ESD7004MUTAG is recommended for designs requiring direct electrical and mechanical compatibility with the original specification. PUSB3F96X is suitable for applications where higher transient suppression capability (5.2A peak pulse current) and lower clamping voltage (4.6V) provide circuit performance benefits.