ESBM10200 Equivalent & Substitute Parts

Part Overview

The ESBM10200 is a 10-position wire-to-board terminal block manufactured by Amphenol PCD, designed for horizontal PCB mounting with side entry wire termination. This component is classified as Active product status and is RoHS Compliant. Terminal blocks of this specification are essential in applications requiring reliable electrical connections between external wiring and printed circuit boards. Substitute parts may be required due to inventory availability, supply chain considerations, or specific application requirements that align with equivalent electrical and mechanical parameters.

Substiute Parts

ESBM10200

Amphenol PCDIn Stock: 1033ESBM10200 Datasheet

Current PartRFQ

1-284392-0

TE Connectivity AMP ConnectorsIn Stock: 32421-284392-0 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ESBM10200 is determined by strict alignment of the following critical parameters:

• 10 positions per level configuration
• 0.150" (3.81mm) pitch spacing
• Horizontal with board mating orientation
• 12 A current rating capability
• 300 V voltage rating
• Through hole mounting type
• Screw-based rising cage clamp wire termination
• Polyamide (PA66) housing material
• 0.25 Nm screw torque specification

The substitute part 1-284392-0 (TE Connectivity AMP Connectors, Buchanan series) meets all critical electrical and mechanical parameters required for functional equivalence with the ESBM10200.

Parameter Comparison

Engineering Selection Recommendations

Both the ESBM10200 and 1-284392-0 are Active product status components with current regulatory compliance certifications. The ESBM10200 carries RoHS Compliance status, while the 1-284392-0 carries ROHS3 Compliance status, representing the current regulatory standard. The 1-284392-0 additionally carries REACH Affected status, indicating compliance with European chemical regulations.

Selection between these parts should be based on supply chain availability, packaging requirements (Tray versus Bulk), and specific application certifications or qualification requirements. The 1-284392-0 supports a broader wire gauge range (14-30 AWG versus 16-28 AWG), which may provide additional flexibility in certain wiring configurations.

Frequently Asked Questions (FAQ)

Q: Can the 1-284392-0 be used as a direct replacement for the ESBM10200?

A: Yes. Both components share identical electrical ratings (12 A, 300 V), mechanical configuration (10 positions, 3.81mm pitch, through hole mounting), and wire termination method (screw-based rising cage clamp). PCB footprints are compatible due to matching pitch and mounting specifications.

Q: What is the difference in wire gauge compatibility?

A: The ESBM10200 accepts 16-28 AWG wire, while the 1-284392-0 accepts 14-30 AWG wire. The 1-284392-0 supports a broader range, accommodating both thicker (14 AWG) and thinner (30 AWG) conductors. Applications using wire within the 16-28 AWG range are compatible with both parts.

Q: Are there packaging differences between these parts?

A: Yes. The ESBM10200 is supplied in Tray packaging, while the 1-284392-0 is supplied in Bulk packaging. Packaging selection depends on inventory management, handling, and storage requirements for your application.

Q: What is the significance of ROHS3 compliance on the 1-284392-0?

A: ROHS3 represents the current iteration of the Restriction of Hazardous Substances directive. The 1-284392-0 meets this current standard, while the ESBM10200 carries RoHS Compliant status. Both are compliant with hazardous substance restrictions; ROHS3 indicates alignment with the most recent regulatory requirements.

Q: Are the screw torque specifications identical?

A: Yes. Both the ESBM10200 and 1-284392-0 require 0.25 Nm (2.2 Lb-In) screw torque, ensuring consistent installation procedures and mechanical reliability across both components.