ES1-LW50-P Equivalent & Substitute Parts

Part Overview

The ES1-LW50-P is an infrared sensor with analog output manufactured by Omron Automation and Safety. This component is classified as obsolete, making identification of suitable alternatives essential for ongoing system maintenance and new design implementations. The sensor operates within a 0°C to 55°C temperature range and features unlimited moisture sensitivity level (MSL 1) rating.

Substiute Parts

ES1-LW50-P

Omron Automation and SafetyIn Stock: 890ES1-LW50-P Datasheet

Current PartRFQ

ES1-LW50-N-P

Omron Automation and SafetyIn Stock: 987ES1-LW50-N-P Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ES1-LW50-P are identified based on the following critical parameters:

• Sensor Type: Infrared
• Manufacturer: Omron Automation and Safety
• Series Compatibility: ES1 family
• Operating Temperature Range: 0°C ~ 55°C
• Moisture Sensitivity Level: MSL 1 (Unlimited)

The ES1-LW50-N-P shares the same infrared sensor technology, operating temperature specifications, and moisture sensitivity rating. While the output interface differs (USB versus analog), both components maintain functional equivalence within the ES1 product family and are suitable for applications requiring infrared sensing within the specified environmental parameters.

Parameter Comparison

Engineering Selection Recommendations

The ES1-LW50-N-P is an active product with RoHS compliance certification, providing regulatory advantage over the obsolete ES1-LW50-P. Both components maintain identical operating temperature ranges and moisture sensitivity specifications. Selection between these parts depends on interface requirements: the ES1-LW50-P provides analog output, while the ES1-LW50-N-P provides USB output. System integration architecture must accommodate the output interface change when transitioning from the main part to the substitute.

Frequently Asked Questions (FAQ)

Q: Can the ES1-LW50-N-P directly replace the ES1-LW50-P in existing applications?

A: Direct replacement requires interface compatibility verification. The ES1-LW50-N-P uses USB output instead of analog output. System signal conditioning and data acquisition architecture must support USB interface to accommodate this substitute.

Q: Are the operating temperature specifications identical between these parts?

A: Yes. Both the ES1-LW50-P and ES1-LW50-N-P operate within the 0°C to 55°C temperature range with MSL 1 (Unlimited) moisture sensitivity rating.

Q: What is the significance of the ES1-LW50-P being obsolete?

A: Obsolete status indicates the part is no longer manufactured. The ES1-LW50-N-P, classified as active, represents the current product line continuation within the ES1 infrared sensor family.

Q: Does the ES1-LW50-N-P meet RoHS requirements?

A: Yes. The ES1-LW50-N-P is RoHS Compliant, providing regulatory compliance for applications subject to RoHS directives.

Q: Are both parts from the same manufacturer?

A: Yes. Both the ES1-LW50-P and ES1-LW50-N-P are manufactured by Omron Automation and Safety, ensuring consistent design philosophy and quality standards within the ES1 sensor family.