ES1-LW50H-P Equivalent & Substitute Parts

Part Overview

The ES1-LW50H-P is an infrared sensor with analog output manufactured by Omron Automation and Safety. This component is classified as obsolete, making identification of suitable alternatives essential for ongoing system maintenance and new design implementations. The sensor operates within the 0°C to 55°C temperature range and features unlimited moisture sensitivity level (MSL 1) rating.

Substiute Parts

ES1-LW50H-P

Omron Automation and SafetyIn Stock: 871ES1-LW50H-P Datasheet

Current PartRFQ

ES1-LW100-N-P

Omron Automation and SafetyIn Stock: 833ES1-LW100-N-P Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the ES1-LW50H-P is determined by the following critical parameters:

• Sensor Type: Infrared
• Manufacturer: Omron Automation and Safety
• Series Compatibility: ES1 family
• Operating Temperature Range: 0°C ~ 55°C
• Moisture Sensitivity Level: MSL 1 (Unlimited)

The ES1-LW100-N-P is identified as a substitute part within the ES1 infrared sensor family. While this alternative maintains the same sensor type, operating temperature range, and MSL rating, it differs in output configuration (USB versus analog) and product status (active versus obsolete).

Parameter Comparison

Engineering Selection Recommendations

The ES1-LW100-N-P serves as an active alternative to the obsolete ES1-LW50H-P. Both components share identical operating temperature specifications and moisture sensitivity ratings, establishing core thermal and environmental compatibility within the ES1 infrared sensor family.

The primary distinction between these parts is the output interface: the main part provides analog output, while the substitute provides USB output. This difference requires circuit-level evaluation to determine compatibility with existing system architecture.

The ES1-LW100-N-P carries RoHS compliance certification, whereas RoHS status is not specified for the ES1-LW50H-P. For applications subject to RoHS requirements, the substitute part satisfies regulatory compliance.

Frequently Asked Questions (FAQ)

Q: Can the ES1-LW100-N-P directly replace the ES1-LW50H-P in existing designs?

A: Both parts are infrared sensors from the Omron ES1 family with identical operating temperature ranges (0°C ~ 55°C) and MSL ratings. However, the output interface differs: ES1-LW50H-P provides analog output while ES1-LW100-N-P provides USB output. Direct replacement requires interface compatibility verification.

Q: What is the significance of the obsolete status of the ES1-LW50H-P?

A: Obsolete status indicates the part is no longer manufactured. The ES1-LW100-N-P is classified as active, meaning it remains in current production and is available for new designs and ongoing procurement.

Q: Are the operating temperature ranges identical between these parts?

A: Yes. Both the ES1-LW50H-P and ES1-LW100-N-P operate within the 0°C to 55°C temperature range.

Q: What does MSL 1 (Unlimited) mean for these sensors?

A: MSL 1 (Unlimited) indicates the lowest moisture sensitivity level, meaning these components have unlimited shelf life and do not require special moisture control during storage or handling.

Q: Does the ES1-LW100-N-P meet RoHS requirements?

A: Yes. The ES1-LW100-N-P is RoHS compliant. RoHS compliance status is not specified for the ES1-LW50H-P.