ES1HL RVG Equivalent & Substitute Parts

Part Overview

The ES1HL RVG is a general-purpose rectifier diode manufactured by Taiwan Semiconductor Corporation, rated for 500 V DC reverse voltage and 1 A average rectified current in a Sub SMA surface mount package. This component is classified as a fast recovery diode with a reverse recovery time of 35 nanoseconds, suitable for applications requiring efficient switching characteristics at moderate voltage and current levels. The part maintains Active product status and is RoHS3 compliant with unlimited moisture sensitivity rating (MSL 1).

Substitute parts are identified when equivalent electrical performance and mechanical compatibility are maintained across the specified parameter set. Substitution becomes necessary due to inventory availability, supply chain considerations, or packaging format requirements while maintaining identical functional performance.

Substiute Parts

ES1HL RVG

Taiwan Semiconductor CorporationIn Stock: 968ES1HL RVG Datasheet

Current PartRFQ

ES1HL R3G

Taiwan Semiconductor CorporationIn Stock: 2642ES1HL R3G Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the ES1HL RVG with the ES1HL R3G is based on equivalence across all critical electrical parameters that define rectifier diode performance and interchangeability. Both parts share identical specifications for reverse voltage rating (500 V), average rectified current (1 A), forward voltage drop (1.7 V @ 1 A), reverse recovery time (35 ns), and reverse leakage current (5 µA @ 500 V). Both components utilize the same package type (DO-219AB Sub SMA) and mounting technology (surface mount), ensuring mechanical and thermal compatibility in circuit board layouts.

The substitution is valid based on the following key parameters:

• Voltage - DC Reverse (Vr) (Max): 500 V
• Current - Average Rectified (Io): 1 A
• Voltage - Forward (Vf) (Max) @ If: 1.7 V @ 1 A
• Reverse Recovery Time (trr): 35 ns
• Current - Reverse Leakage @ Vr: 5 µA @ 500 V
• Package / Case: DO-219AB
• Mounting Type: Surface Mount
• Operating Temperature Range: -55°C to 150°C

Both parts maintain Active product status, RoHS3 compliance, and REACH unaffected designation. The primary distinction between these parts is packaging format: ES1HL RVG is supplied in standard packaging, while ES1HL R3G is supplied in Cut Tape (CT) format.

Parameter Comparison

Engineering Selection Recommendations

Both ES1HL RVG and ES1HL R3G are Active products manufactured by Taiwan Semiconductor Corporation with identical electrical specifications and mechanical compatibility. Selection between these parts is determined by packaging and supply requirements rather than functional performance.

ES1HL RVG is appropriate for applications where standard packaging format is specified or preferred, with 922 pieces currently in stock inventory.

ES1HL R3G is appropriate for applications where Cut Tape (CT) packaging format is required for automated assembly processes, with 2628 pieces currently in stock inventory.

Both parts satisfy RoHS3 compliance requirements and REACH regulatory status. Both maintain unlimited moisture sensitivity rating (MSL 1), eliminating special handling or storage considerations. The selection between these substitutes is based on supply chain availability, packaging automation requirements, and inventory levels rather than electrical or thermal performance differences.

Frequently Asked Questions (FAQ)

Q: Are ES1HL RVG and ES1HL R3G electrically interchangeable?

A: Yes. Both parts are rated for identical voltage (500 V), current (1 A), forward voltage drop (1.7 V @ 1 A), and reverse recovery time (35 ns). Electrical performance is equivalent across all specified parameters.

Q: What is the difference between these substitute parts?

A: The primary difference is packaging format. ES1HL RVG uses standard packaging, while ES1HL R3G is supplied in Cut Tape (CT) format. Both use the same DO-219AB Sub SMA package type and surface mount technology.

Q: Can ES1HL R3G be used in place of ES1HL RVG in circuit board assembly?

A: Yes. Both parts use identical DO-219AB Sub SMA packages and surface mount technology. The Cut Tape (CT) format of ES1HL R3G is compatible with standard pick-and-place assembly equipment.

Q: Are there any compliance or regulatory differences between these parts?

A: No. Both parts maintain identical RoHS3 compliance, REACH unaffected status, and unlimited moisture sensitivity rating (MSL 1). Regulatory and environmental compliance is equivalent.

Q: What is the operating temperature range for both parts?

A: Both ES1HL RVG and ES1HL R3G operate across a junction temperature range of -55°C to 150°C, providing identical thermal performance specifications.

Q: Which part should be selected based on inventory availability?

A: ES1HL R3G has higher current inventory (2628 pieces) compared to ES1HL RVG (922 pieces). Selection based on supply chain requirements and delivery timeline is appropriate when electrical specifications are equivalent.

Q: Do these parts require different handling or storage procedures?

A: No. Both parts carry MSL 1 (Unlimited) moisture sensitivity rating, eliminating special moisture control or baking requirements during storage and handling.