ES1DL RTG Equivalent & Substitute Parts

Part Overview

The ES1DL RTG is a general-purpose rectifier diode manufactured by Taiwan Semiconductor Corporation, rated for 200 V DC reverse voltage and 1 A average rectified current in a Sub SMA surface mount package. This component is classified as Active product status and complies with ROHS3 and REACH standards. Equivalent and substitute parts are identified based on matching or superior electrical performance within the same package category, enabling design flexibility and supply chain continuity for applications requiring fast recovery rectification in compact form factors.

Substiute Parts

ES1DL RTG

Taiwan Semiconductor CorporationIn Stock: 1002ES1DL RTG Datasheet

Current PartRFQ

ES1DL

Taiwan Semiconductor CorporationIn Stock: 9612ES1DL Datasheet

Parametric EquivalentRFQ

HS1DL RVG

Taiwan Semiconductor CorporationIn Stock: 2896HS1DL RVG Datasheet

Parametric EquivalentRFQ

RS07D-GS08

Vishay General Semiconductor - Diodes DivisionIn Stock: 20254RS07D-GS08 Datasheet

SimilarRFQ

VS-1EFH02-M3/I

Vishay General Semiconductor - Diodes DivisionIn Stock: 50123VS-1EFH02-M3/I Datasheet

SimilarRFQ

VS-2EFH02HM3/I

Vishay General Semiconductor - Diodes DivisionIn Stock: 20115VS-2EFH02HM3/I Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the ES1DL RTG is determined by equivalence in the following critical parameters: DC reverse voltage rating (200 V minimum), average rectified current capacity (1 A minimum), fast recovery speed classification, DO-219AB package compatibility, and surface mount mounting type. Parts are grouped into two categories:

Parametric Equivalents maintain identical or superior electrical specifications across all key parameters, including reverse recovery time, forward voltage, and reverse leakage current. These parts are direct functional replacements.

Similar Parts share the same voltage and package specifications but may differ in current rating, reverse recovery time, or leakage characteristics. Selection of similar parts requires verification that the application tolerates the specified parameter variations.

The following parameters establish substitution validity:

• Voltage - DC Reverse (Vr) (Max): 200 V
• Current - Average Rectified (Io): 1 A minimum
• Package / Case: DO-219AB
• Mounting Type: Surface Mount
• Speed: Fast Recovery classification

Parameter Comparison

Engineering Selection Recommendations

ES1DL (Taiwan Semiconductor Corporation) is a parametric equivalent to ES1DL RTG with identical electrical specifications. This part is Active product status, ROHS3 compliant, and available in higher inventory quantities with alternative packaging options (Cut Tape and Digi-Reel). Selection is appropriate for applications requiring direct functional replacement without performance trade-offs.

HS1DL RVG (Taiwan Semiconductor Corporation) maintains voltage and current ratings identical to the main part. Reverse recovery time is 50 ns compared to 35 ns for ES1DL RTG, and capacitance is specified at 20 pF versus 10 pF. This part is Active product status and ROHS3 compliant. Selection is appropriate where the extended reverse recovery time does not impact circuit performance.

VS-1EFH02-M3/I (Vishay General Semiconductor - Diodes Division) is a FRED Pt® series part with 200 V and 1 A ratings matching the main part. Forward voltage is 930 mV at 1 A (20 mV lower than ES1DL RTG), reverse recovery time is 16 ns (superior), and reverse leakage is 2 µA (lower). Operating temperature range extends to -65°C to 175°C. This part is Active product status and ROHS3 compliant. Selection is appropriate for applications benefiting from improved switching speed and lower leakage.

VS-2EFH02HM3/I (Vishay General Semiconductor - Diodes Division) is a FRED Pt® series part rated for 200 V and 2 A, providing higher current capacity than the main part. Reverse recovery time is 25 ns and reverse leakage is 2 µA. This part carries AEC-Q101 automotive qualification and ROHS3 compliance. Selection is appropriate for applications requiring higher current handling or automotive-grade reliability.

RS07D-GS08 (Vishay General Semiconductor - Diodes Division) is rated for 200 V but with 500 mA average rectified current, representing a lower current rating than the main part. Reverse recovery time is 150 ns and reverse leakage is 10 µA. This part carries AEC-Q101 automotive qualification. Selection is appropriate only for applications with current requirements not exceeding 500 mA.

Frequently Asked Questions (FAQ)

Q: Can ES1DL RTG be directly replaced with ES1DL?

A: Yes. ES1DL is a parametric equivalent with identical electrical specifications: 200 V reverse voltage, 1 A average rectified current, 950 mV forward voltage at 1 A, and 35 ns reverse recovery time. Both parts use DO-219AB packaging and are ROHS3 compliant. The primary difference is packaging format (ES1DL offers Cut Tape and Digi-Reel options) and inventory availability.

Q: What is the difference between ES1DL RTG and HS1DL RVG?

A: Both parts share 200 V reverse voltage and 1 A current ratings. HS1DL RVG has a reverse recovery time of 50 ns compared to 35 ns for ES1DL RTG, and capacitance of 20 pF versus 10 pF. These differences may affect switching performance in high-frequency applications. Both use DO-219AB packaging and are ROHS3 compliant.

Q: Can RS07D-GS08 replace ES1DL RTG?

A: RS07D-GS08 is not a direct replacement. While both parts share 200 V reverse voltage and DO-219AB packaging, RS07D-GS08 is rated for 500 mA average rectified current, which is half the 1 A rating of ES1DL RTG. RS07D-GS08 carries AEC-Q101 automotive qualification. Selection of RS07D-GS08 is appropriate only for applications with current requirements not exceeding 500 mA.

Q: What advantages does VS-1EFH02-M3/I offer over ES1DL RTG?

A: VS-1EFH02-M3/I maintains 200 V and 1 A specifications but offers superior performance in three areas: forward voltage of 930 mV at 1 A (20 mV lower), reverse recovery time of 16 ns (19 ns faster), and reverse leakage of 2 µA (lower). Operating temperature range extends to -65°C to 175°C. These characteristics benefit high-frequency switching applications and low-leakage requirements.

Q: When should VS-2EFH02HM3/I be selected instead of ES1DL RTG?

A: VS-2EFH02HM3/I is selected when applications require higher current capacity (2 A versus 1 A) or automotive-grade reliability (AEC-Q101 qualification). The part maintains 200 V reverse voltage and offers superior reverse recovery time (25 ns) and lower reverse leakage (2 µA). Operating temperature range extends to -65°C to 175°C.

Q: Are all substitute parts compatible with the same PCB layout as ES1DL RTG?

A: All substitute parts listed use DO-219AB packaging and surface mount mounting type, ensuring mechanical and footprint compatibility with ES1DL RTG. Electrical performance differences (forward voltage, reverse recovery time, leakage current) do not affect physical compatibility but may require circuit performance verification.

Q: What is the significance of AEC-Q101 qualification on RS07D-GS08 and VS-2EFH02HM3/I?

A: AEC-Q101 is an automotive industry qualification standard. Parts carrying this qualification have undergone additional reliability testing and are approved for automotive applications. ES1DL RTG does not carry this qualification. Selection of AEC-Q101 qualified parts is required for automotive applications or where automotive-grade reliability is specified.

Q: Can HS1DL RVG be used in applications where ES1DL RTG is specified?

A: HS1DL RVG can be used where the extended reverse recovery time (50 ns versus 35 ns) and increased capacitance (20 pF versus 10 pF) do not degrade circuit performance. Both parts maintain identical voltage and current ratings. Circuit simulation or testing is necessary to confirm compatibility in timing-critical applications.