ES1DLHRVG Equivalent & Substitute Parts

Part Overview

The ES1DLHRVG is a general-purpose rectifier diode manufactured by Taiwan Semiconductor Corporation, rated for 200 V DC reverse voltage and 1 A average rectified current. This surface mount component operates in the Sub SMA package (DO-219AB) and is classified as a fast recovery diode with a reverse recovery time of 35 nanoseconds. The part is actively produced, AEC-Q101 qualified for automotive applications, and fully compliant with RoHS3 and REACH regulations.

Equivalent and substitute parts are identified when alternative components share identical or compatible electrical and mechanical specifications, enabling direct replacement in circuit designs without functional degradation. Substitutes are necessary when the primary part number becomes unavailable, when alternative packaging formats are required, or when inventory constraints necessitate component sourcing from equivalent product lines.

Substiute Parts

ES1DLHRVG

Taiwan Semiconductor CorporationIn Stock: 798ES1DLHRVG Datasheet

Current PartRFQ

ES1DL

Taiwan Semiconductor CorporationIn Stock: 9612ES1DL Datasheet

Parametric EquivalentRFQ

HS1DL RVG

Taiwan Semiconductor CorporationIn Stock: 2896HS1DL RVG Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ES1DLHRVG is determined by strict equivalence across the following critical electrical and mechanical parameters:

Primary Substitution Criteria:

• Voltage - DC Reverse (Vr) (Max): 200 V
• Current - Average Rectified (Io): 1 A
• Package / Case: DO-219AB (Sub SMA)
• Mounting Type: Surface Mount
• Operating Temperature - Junction: -55°C to 150°C
• Technology: Standard
• RoHS Status: ROHS3 Compliant

Secondary Compatibility Parameters:

• Voltage - Forward (Vf) (Max) @ If: 950 mV @ 1 A
• Current - Reverse Leakage @ Vr: 5 µA @ 200 V
• Reverse Recovery Time (trr): ≤ 50 ns
• Capacitance @ Vr, F: ≤ 20 pF @ 4V, 1MHz

Parts meeting all primary criteria and maintaining secondary parameter compatibility are classified as parametric equivalents. Variations in reverse recovery time and junction capacitance within specified tolerances do not preclude substitution when all primary electrical ratings and package specifications remain identical.

Parameter Comparison

Engineering Selection Recommendations

ES1DL - Parametric Equivalent

The ES1DL is a direct parametric equivalent to the ES1DLHRVG. Both components share identical electrical specifications including reverse voltage rating, average rectified current, forward voltage drop, reverse recovery time, and junction capacitance. Both are manufactured by Taiwan Semiconductor Corporation, packaged in DO-219AB (Sub SMA), and maintain identical operating temperature ranges. The ES1DL differs only in packaging format (Cut Tape and Digi-Reel) compared to the ES1DLHRVG. Both parts are actively produced, AEC-Q101 qualified, and fully compliant with RoHS3 and REACH requirements. Selection between these two parts is determined by packaging and supply chain requirements rather than electrical performance.

HS1DL RVG - Parametric Equivalent with Tolerance Variations

The HS1DL RVG is a parametric equivalent with measurable but acceptable variations in secondary electrical characteristics. This component maintains identical primary specifications: 200 V reverse voltage rating, 1 A average rectified current, 950 mV forward voltage drop at 1 A, and identical operating temperature range. The HS1DL RVG exhibits a reverse recovery time of 50 nanoseconds (compared to 35 ns for the ES1DLHRVG) and junction capacitance of 20 pF at 4V, 1MHz (compared to 10 pF for the ES1DLHRVG). These variations remain within acceptable tolerances for general-purpose rectification applications. The HS1DL RVG is packaged in Cut Tape format, manufactured by Taiwan Semiconductor Corporation, and maintains identical compliance certifications including AEC-Q101, RoHS3, and REACH Unaffected status. Selection of this substitute is appropriate when the extended reverse recovery time and increased capacitance do not conflict with circuit timing or frequency response requirements.

Frequently Asked Questions (FAQ)

Q: Can ES1DL be used as a direct replacement for ES1DLHRVG?

A: Yes. The ES1DL is a parametric equivalent with identical electrical specifications and package designation (DO-219AB Sub SMA). Both components are surface mount, automotive-grade, and AEC-Q101 qualified. The only difference is packaging format. Direct substitution is supported without circuit modification.

Q: What are the differences between ES1DLHRVG and HS1DL RVG?

A: Both components share identical voltage ratings (200 V), current ratings (1 A), forward voltage characteristics (950 mV @ 1 A), and operating temperature range (-55°C to 150°C). The HS1DL RVG has a reverse recovery time of 50 ns compared to 35 ns for the ES1DLHRVG, and junction capacitance of 20 pF compared to 10 pF. These differences are within acceptable tolerances for standard rectification applications.

Q: Is the HS1DL RVG suitable for high-frequency switching applications?

A: The HS1DL RVG has a reverse recovery time of 50 nanoseconds and junction capacitance of 20 pF. Application suitability depends on specific circuit frequency requirements and switching speed specifications. Verify that these parameters are compatible with your circuit design before selection.

Q: Are all three parts automotive-qualified?

A: The ES1DLHRVG is explicitly qualified to AEC-Q101 automotive standards. The ES1DL and HS1DL RVG are both actively produced by Taiwan Semiconductor Corporation with identical compliance certifications. All three parts are RoHS3 compliant and REACH unaffected.

Q: What is the difference in packaging between these parts?

A: The ES1DLHRVG is supplied in standard packaging format. The ES1DL is available in Cut Tape (CT) and Digi-Reel packaging. The HS1DL RVG is supplied in Cut Tape format. All three use the DO-219AB Sub SMA package designation for the physical component itself.

Q: Can these parts be used interchangeably in PCB assembly?

A: Yes. All three parts use identical surface mount package geometry (DO-219AB Sub SMA). PCB footprints, solder pad layouts, and assembly processes are identical. Component selection is determined by electrical performance requirements and packaging supply format rather than physical compatibility.

Q: What is the moisture sensitivity level for these diodes?

A: All three parts have Moisture Sensitivity Level (MSL) rating of 1 (Unlimited), indicating no moisture sensitivity restrictions. Standard handling and storage procedures apply without special moisture control requirements.

Q: Are these parts suitable for automotive applications?

A: The ES1DLHRVG carries explicit AEC-Q101 automotive qualification. The ES1DL and HS1DL RVG are manufactured by Taiwan Semiconductor Corporation with identical compliance status. All three parts are suitable for automotive circuit applications.