ES1CL RUG Equivalent & Substitute Parts

Part Overview

The ES1CL RUG is a general-purpose rectifier diode manufactured by Taiwan Semiconductor Corporation, rated for 150V DC reverse voltage and 1A average rectified current in a Sub SMA surface mount package. This component is classified as a fast recovery diode with a reverse recovery time of 35 nanoseconds, suitable for standard switching and rectification applications. The part maintains Active product status and is RoHS3 compliant.

Substitute parts are identified when electrical characteristics, mechanical compatibility, and regulatory compliance align with the original specification, enabling direct replacement in circuit designs without functional degradation.

Substiute Parts

ES1CL RUG

Taiwan Semiconductor CorporationIn Stock: 872ES1CL RUG Datasheet

Current PartRFQ

ES1CL RVG

Taiwan Semiconductor CorporationIn Stock: 59797ES1CL RVG Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ES1CL RUG is determined by strict equivalence across the following critical parameters:

Electrical Equivalence Requirements:

• Voltage - DC Reverse (Vr) Maximum: 150 V
• Current - Average Rectified (Io): 1 A
• Voltage - Forward (Vf) Maximum @ If: 950 mV @ 1 A
• Reverse Recovery Time (trr): 35 ns
• Current - Reverse Leakage @ Vr: 5 µA @ 150 V

Mechanical Compatibility Requirements:

• Package / Case: DO-219AB
• Mounting Type: Surface Mount
• Supplier Device Package: Sub SMA

Regulatory & Compliance Requirements:

• RoHS Status: ROHS3 Compliant
• Product Status: Active
• Manufacturer: Taiwan Semiconductor Corporation

The ES1CL RVG meets all substitution criteria as a parametric equivalent, differing only in packaging format (Cut Tape versus reel configuration) and capacitance measurement reference voltage, neither of which affects functional interchangeability in circuit applications.

Parameter Comparison

Engineering Selection Recommendations

Both ES1CL RUG and ES1CL RVG are Active products from Taiwan Semiconductor Corporation with identical electrical performance specifications and full RoHS3 compliance. Selection between these parts is determined by procurement and assembly requirements rather than functional performance.

ES1CL RUG is appropriate for applications requiring reel-packaged components for automated pick-and-place assembly processes.

ES1CL RVG is appropriate for applications requiring cut tape packaging for manual assembly, kit builds, or lower-volume production runs.

Both parts satisfy the same circuit design requirements and operate within identical electrical and thermal parameters. The difference in capacitance measurement reference voltage (1V versus 4V) does not affect substitution eligibility, as both measurements characterize the same physical capacitance value under different bias conditions.

Frequently Asked Questions (FAQ)

Q: Can ES1CL RVG replace ES1CL RUG in production assembly?

A: Yes. Both parts are electrically and mechanically identical. The difference is packaging format: ES1CL RUG is supplied on reel, while ES1CL RVG is supplied in cut tape. Assembly equipment compatibility determines which format is appropriate for your production line.

Q: Are the electrical specifications identical between these parts?

A: Yes. Both parts share identical voltage ratings (150V reverse, 950mV forward @ 1A), current ratings (1A average rectified), reverse recovery time (35ns), reverse leakage current (5µA @ 150V), and operating temperature range (-55°C to 150°C).

Q: Does the capacitance measurement difference affect circuit performance?

A: No. The capacitance value is 10pF in both cases. The difference in measurement reference voltage (1V versus 4V) reflects different test conditions but does not indicate different physical capacitance or circuit behavior.

Q: Are both parts RoHS3 compliant?

A: Yes. Both ES1CL RUG and ES1CL RVG are RoHS3 compliant and REACH unaffected.

Q: What is the DO-219AB package?

A: DO-219AB is the industry standard package designation for Sub SMA surface mount diodes. Both parts use this identical package, ensuring mechanical compatibility with the same PCB footprints and assembly processes.

Q: Can I mix ES1CL RUG and ES1CL RVG in the same design?

A: Yes. Both parts are functionally equivalent and can be used interchangeably in circuit designs. Packaging format selection depends on your assembly and procurement workflow.